Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #56660076

Tender For Certain Sanctioned Lbw And Revenue Works At Miran Sahib Under Ge Jammu.

Issued by Statutory Bodies & Commissions/Committees · Jammu, Jammu and Kashmir
Tender Value
45.17 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
16 days left
EMD
90340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Certain Sanctioned Lbw And Revenue Works At Miran Sahib Under Ge Jammu.- 1 B/R Portion: -Surface Excavation Not Exceeding 30 Cm Deep And Averaging 15 Cm Deep And Getting Out In Any Type Of Soil And Removal Of Soil Upto 50 Mtr Complete All As Specified And As Directed. 2 Excavating In Trenches Not Exceeding 1.5M Wide And Not Exceeding 1.5 M In Depth For Foundation Etc, For Laying Of Drain Pipes Etc And For Manhole Etc, Not Exceeding 10 Sqm On Plan And Not Exceeding 1.5 M In Depth And Getting Out In Hard/ Dense Soil Complete All As Specified And As Directed. 3 Pcc (1:4:8) Type D-2 (Using 40Mm Graded Crushed Stone Aggregate) As In Mass Concrete, In Foundation Filling Complete All As Specified And As Directed. 4 Rcc (1:2:4) Nominal Mix Type B-1 (Using 20Mm Graded Crushed Stone Aggregate) As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under Reamed Piles And Mass Concrete Etc Complete All As Specified And As Directed.Note: - Formwork Will Be Measured And Paid Separately. 5 Rcc (1:2:4) Nominal Mix Type B-1 (Using 20Mm Graded Crushed Stone Aggregate) As In Columns, Pillars, Piers, Posts And Struts Etc Complete All As Specified And As Directed.Note: - Formwork Will Be Measured And Paid Separately. 6 Description All As Per Ser Item No 5.00 Here-In-Before But As In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span Etc Complete All As Specified And As Directed.Note: - Formwork Will Be Measured And Paid Separately. 7 Providing Reinforced Cement Concrete (1:2:4) Type B-1 (Using 20 Mm Graded Crushed Stone Aggregate) As In Roof Slabs Supported On Walls Surfaces Of Concrete Flat Etc And In Shelves Complete All As Specified And As Directed.Note: - Formwork Will Be Measured And Paid Separately. 8 Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams And Similar Work; Vertical Or To Batter Etc Complete All As Specified And As Directed. 9 Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work; As In Shelves Not Exceeding 200 Mm Thick (Horizontal Or Sloping) Fair Finished Flat Surfaces Etc Complete All As Specified And As Directed. 10 Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc Complete All As Specified And As Directed. 11 Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Etc Complete All As Specified And As Directed. 12 Formwork To Edges Of Concrete Flats, Treads, Breaks In Floors, Window Cills, Concrete Railings, Openings In Concrete Walls, Floor And Roofs Exceeding 10Cm But Not Exceeding 20 Cm Wide And Sides Of Rcc/ Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exceeding 10Cm But Not Exceeding 20Cm Wide Etc Complete All As Specified And As Directed. 13 Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar (1:3) To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc. And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc. And Making Good, Cutting Not Exceeding 10 Cm Girth Complete All As Specified And As Directed. 14 Mild Steel Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hopping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And As Directed. 15 Description All As Per Ser Item No 14.00 Here-In-Before But 5 Mm Dia And Over And Including 10Mm Dia In Stirrups, Spacers And Binders Etc Complete All As Specified And As Directed. 16 Brick Work With Fly Ash Brick (Old Size Brick), Straight Or Curved On Plan Exceeding 6 M Mean Radius Built In Cement Mortar (1:6) Complete All As Specified And As Directed. 17 Brick Work With Fly Ash Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Wall Built In Cement Mortar (1:4) Complete All As Specified And As Directed. 18 Hardcore Of Gauge Not Exceeding 63 Mm Of Broken Stone Or Boulders, Deposited, Spread And Levelled In Layers Not Exceeding 15 Cm Thick, Watered And Rammed To A True Surface Complete All As Specified And As Directed. 19 75 Mm Thick Pcc (1:4:8) Type D-2 (Using 40Mm Graded Crushed Stone Aggregate) In Floor As Sub Base Complete All As Specified And As Directed. 20 25 Mm Thick Pcc (1:2:4) Type B-0 (Using 12.5Mm Graded Crushed Stone Aggregate), As In Sub Base Complete All As Specified And As Directed. 21 Non Skid Ceramic Colour Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm In Floor Etc, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Including 15 Mm Screed Bed Cement Mortar (1:6) Complete All As Specified And As Directed. 22 Glazed Ceramic Colour Tiles In Vertical Surface (450 X 350 X 7 Mm) Thick As In Dados, Skirting Etc, Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match The Surface And Including 10 Mm Thick Rendering Cement Mortar (1:6) Complete All As Specified And As Directed. 23 Factory Made Solid Pvc Moulded Door Frame Of Size 50 X 100Mm With Wood Free Eps And 2Mm Thick Moulded Pvc Sheet Allround Supplying And Fixing In Wall At Site As Per Manufacturer Specification Complete All As Specified And As Directed. 24 Factory Made Solid Pvc Moulded Door Shutter With Wood Free Eps, 28 To 30Mm Thick (Stiles), With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face And 2Mm Plain Colour Pvc Sheet On Back Face, Supplying And Fixing In Frame At Site As Per Specification And Drawing Complete All As Specified And As Directed. 25 Rendering 15Mm Thick On Brick Work Or Concrete Surfaces On Other Than Fair Faces Of Brick Work Built In Cement Mortar (1:6) And Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 26 Rendering 15Mm Thick On Brick Work Or Concrete Surfaces On Fair Faces Of Brick Work Built In Cement Mortar (1:4) And Finished Even And Smooth Without Using Extra Cement With Water Proofing Compound Complete All As Specified And As Directed.Note: - Wpc Will Be Measured And Paid Separately. 27 Rendering 5Mm Thick In Cement Mortar (1:3) Finished Even And Smooth On Cement Concrete Surfaces As In Ceiling Complete All As Specified And As Directed. 28 Provision Of Roof Treatment With Elastrometric Water Proofing Membrane All As Given Below: -(A) Material And Labour For Plastering 10Mm Thick In Cement Mortar (1:3) Using 100% Coarse Sand On Roof Surface Including Water Proofing Compound As Per ManufacturerS Instructions And As Directed By Engineer-In-Charge.(B) Applying One Coat Of Primer Of Acrylic Reinforcement Liquid Elastometric Water Proofing Membrane With Uv Resistant Properties And Solar Reflective Properties (3:1 Water Dilution) On Prepared Surface With Roller And Allowed To Dry.(C) Supply And Applying Two Coats Of Undiluted Thick Coat Of Acrylic Reinforcement Liquid Applied Elastometric Water Proofing Membrane With Uv Resistant Properties And Solar Reflective Properties Before First Coat Insert Smart Care Roof Tape Corner/ Joints And Allow It To Dry Than Apply Further Second Coat Complete All As Specified And As Directed.Note: - Every Coat Time Gap Should Be Minimum 6 Hrs And Thickness Of Each Coat 2-3Mm). 29 15 Mm Dia Galvanized Pipes Medium Grade With All Fittings And Fixed Complete Wall And Ceiling Or Laid In Floors Complete All As Specified And As Directed. 30 20 Mm Dia Galvanized Pipes Medium Grade With All Fittings And Fixed Complete Wall And Ceiling Or Laid In Floors Complete All As Specified And As Directed. 31 25 Mm Dia Galvanized Pipes Medium Grade With All Fittings And Fixed Complete Wall And Ceiling Or Laid In Floors Complete All As Specified And As Directed. 32 Rotational Moulded Polyethylene Water Tank (Cylindrical Vertical Closed Top) Hoisted And Fixed In Position Capacity Of Tank 1000 Litres And Supply And Fixing Ball Brass Valve High Pressure With Polyethylene Float And Fly Nut Complete 20Mm Bore Screwed To Pipe For Brass Complete All As Specified And As Directed. 33 Preparing Plastered Surface And Applying Three Coats Of White Wash On Wall Complete All As Specified And As Directed. 34 Preparing Plastered Surface And Applying Three Coats Of White Wash On Ceiling Complete All As Specified And As Directed. 35 Preparing Plastered Surface And Applying Two Coats Of Cement Base Paint On Wall Over A Coat Of Primer Complete All As Specified And As Directed. 36 Returning Filling Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exceeding 25 Cm In Each Layers In Hard/ Dense Soil Complete All As Specified And As Directed. 37 Removing Excavated Materials In Soil To A Distance Not Exceeding 50M And Depositing Where Directed At A Level Not Exceeding 1.50M Above The Starting Point Complete All As Specified And As Directed. 38 35 Mm Thick Plain Framed, Panelled Shutter (Two Panel) With Lock Rail And Panel Of 9 Mm B.W.P. Commercial Ply Or 12 Mm Veneered Particle Board With Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per Is : 1003 (Part - I), Kiln Seasoned Complete All As Specified And As Directed. 39 Pressed Steel Frames (Factory Made) Made Out Of 1.25 Mm Thick Black Mild Steel Sheet For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete Size Of Frame 105 X 60Mm Including Bottom Of Each Chowkhat To Be Welded With 2 NoS 25 X 25 X 3Mm Thick Flat Iron Projecting 10 Cm On Either Side Complete All As Specified And As Directed. 40 Pcc (1:3:6) Type C-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Back Filling, Bed Block For Hold Fast Etc Complete All As Specified And As Directed. 41 Pcc (1:2:4) Type B-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Coping, Benching On Corner Of Joints, As In Roof Kerbs Rounded Or Chamfered On Edges Etc Complete All As Specified And As Directed. 42 100 Mm Size Butt Hinges Medium Weight Cold Rolled Stainless Steel Complete All As Specified And As Directed. 43 Aluminium Handles D Type Anodised 150 Mm Long Isi Marked Complete All As Specified And As Directed. 44 Description All As Per Ser Item No 43.00 Here-In-Before But 125 Mm Long Complete All As Specified And As Directed. 45 200 Mm Long Aluminium Anodised Barrel Tower Bolt Of Extruded Section Isi Marked Complete All As Specified And As Directed. 46 Description All As Per Ser Item No 45.00 Here-In-Before But 150 Mm Long Complete All As Specified And As Directed. 47 300 Mm Long Dia 16Mm Aluminium Alloy, Anodized, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Section And Fixing Bolts And Sliding Bolts Of Extruded Section Complete All As Specified And As Directed. 48 Preparing Surface Of New Wood And Wood Based Material Of Any Description And Girth, Not Otherwise Described And Treated With Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And As Directed. 49 Preparing Surface Of New Steel Material Of Any Description And Girth, Not Otherwise Described And Treated With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Complete All As Specified And As Directed. 50 16 To 18 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window-Cills Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing Into White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match Shade Of Granite Including Taking Down Old Complete All As Specified And As Directed. 51 Providing Edge Moulding To 18-20Mm Thick Granite Stone Of Counters Vanities Etc. Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete All As Specified And As Directed. 52 Vitreous China Squatting Pan Orissa Pattern, Size 580 X 440 Mm White, With Integral Foot Rest And P Or S Trap And Connection To Flushing Pipe, Anti-Syphonage Pipe Complete Including Provision Of Cement Concrete Bedding Complete All Specified In Ssr Part - I Complete All As Directed. 53 Vitreous China White Under Counter Wash Basins (595 X 420 X 200 Mm) Oval Shape, Including Waste Pipe, Brackets And Connecting Pipe Fixed Complete All As Specified And As Directed. 54 Pvc Valveless, Symphonic Action Type, Flushing Cistern, 10 Litres Capacity, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Brackets Complete All As Specified And As Directed. 55 Low Density Pvc Connections Commercial Quality 15Mm Bore With Ptmt Nuts Of Length 450Mm Complete All As Specified And As Directed. 56 Low Density Pvc Waste Pipe 32 Mm Bore For Flusing Cistern Complete All As Specified And As Directed. 57 15 Mm Bore Bib Taps Long Nose/ Long Body, Cast Copper Alloy Chromium Plated Fancy Type With Capstan Head Handle Screwed Down, Screwed For Brass, Weight Not Less Than 450 Gms Ferrule And Fixed Complete All As Specified And As Directed. 58 15 Mm Bore Angle Valves, Cast Copper Alloy Chromium Plated Fancy Type, Half Turn, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Weight Not Less Than 450 Gms Screwed Both Ends For Iron Pipe Or For Unions Complete All As Specified And As Directed. 59 15 Mm Bore Sawn Neck Pillar Cock Cast Copper Alloy, Chromium Plated With Angular Knob Fixed To 15Mm Dia Mild Steel Pipe Complete With All Fittings Complete All As Specified And As Directed. 60 Shower Rose Brass Chromium Plated With Swivel Joint Of Size 125 Mm Cast Copper Alloy Chromium Plated Fancy Type With Chromium Plated Neck 9\ Long Made To Shape, Weight Not Less Than 350 Gms Complete All As Specified And As Directed. 61 20 Mm Dia Gun Metal, Globe Or Gate Valve With Iron Wheel Head, Screwed Both Ends For Iron Pipe Complete All As Specified And As Directed. 62 75 Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints, Bends, Tees Complete Fixed To Walls At Any Height Complete All As Specified And As Directed. 63 75 Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints, Bends, Tees Laid In Trenches Or In Floors Complete All As Specified And As Directed. 64 110 Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints, Bends, Tees Laid In Trenches Or In Floors Complete All As Specified And As Directed. 65 Pvc (Swr) Bends 110 Mm Radius Complete All As Specified And As Directed. 66 110 Mm Pvc (Swr) Junction Single (T) Equal / Unequal Complete All As Specified And As Directed. 67 Pvc (Swr) Bends/ Shoes Any Radius Of 75 Mm Dia Complete All As Specified And As Directed. 68 Pvc (Swr) Bends Any Radius Provided With Access Door Of 110Mm Dia Complete All As Specified And As Directed. 69 Description All As Per Ser Item No 68.00 Here-In-Before But 75 Mm Dia Complete All As Specified And As Directed. 70 Pvc (Swr) Vent Cowl Of Radius Of 75 Mm Dia Complete All As Specified And As Directed. 71 75Mm Pvc (Swr) Floor Trap, Plain With Grating Including Jointing With Solvent Cement Including Jointing To Waste Pipe Fixed In Cement Concrete (1:2:4) Type B-1 Complete All As Specified And As Directed. 72 Stack Clamps Made Out Of 50Mm X 5Mm Flat Iron And 16Mm Dia Round Iron Stays Including Bolts And Nuts And Securing Ends Of Stay To Walls Or Roof For 75 Mm Bore Pipe Complete All As Specified And As Directed. 73 Gi Spout 25Mm Dia Light Grade, Fixed To Walls Complete All As Specified And As Directed. 74 Brass Chromium Plated Towel Rail 20 Mm Dia D Type 60 Cm Long Between Flanges Complete All As Specified And As Directed. 75 Mild Steel Peg Set Of Six Powder Coated As Approved By Ge Complete All As Specified And As Directed. 76 Supply Only Liquid Water Proofing Compound Complete All As Specified And As Directed. 77 50Mm Thick Cement Concrete (1:3:6) Type C-2 (Using 20Mm Graded Crushed Stone Aggregate) As In Floor/ Plinth Protection Laid In Suitable Panels Finished Even And Fair All As Specified. 6Mm Joints Should Be Filled With Bitumen Mastic Filling Comprising Of One Part Of Heated Bitumen 85/25 Or 80/100 Grade And Three Parts Of Sand (All By Weight) Complete All As Specified And As Directed. 78 Supply And Laying Vitreous China Urinals, Half Stall Type (600 X 320 X 340Mm) White With Grating And Union For Discharge Pipe Complete Including Providing And Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar (1:2), Securing Urinal To Plugs With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Fixing Automatic Flushing Cistern With Brackets, Flush Pipe, Grating And Union For Discharge Pipe, Brackets And Chromium Plated Waste Coupling Including Urinal Spreader Complete All As Specified And As Directed. 79 Cement Concrete (1:3:6) Type C-2 (Using 40 Mm Graded Crushed Stone Aggregate) As In Surface Channels Complete All As Specified And As Directed. 80 Extra For Forming Fair Finished Drain Or Channel 30 Cm Inner Girth In Cement Concrete Using Extra Cement Complete All As Specified And As Directed. 81 125 Mm Chromium Plated Stainless Steel Grating With Or Without Waste Hole Complete All As Specified And As Directed. 82 Washed Stone Grit Plaster On Exterior Walls In Two Layers, Under Layer 12Mm Cement Plaster (1:4) (1 Cement : 4 Coarse Sand) Furrowing The Under Layer With Scratching Tool, Applying Cement Slurry On The Under Layer @ 3 Kg Of Cement Per Square Metre, Top Layer 15Mm Cement Plaster (1: ½: 2) (1 Cement : ½ Coarse Sand : 2 Stone Chipping 10Mm Nominal Size) In Panels With Groove All Around As Per Approved Pattern Including Scrubbing And Washing The Top Layer With Brushes And Water To Expose The Stone Chippings Including Taking Down Old Plaster And Two Coats Of Cement Based Paint Complete All As Specified And As Directed.

BOQ

Name of Work:- CERTAIN SANCTIONED LBW AND REVENUE WORKS AT MIRAN SAHIB UNDER GE JAMMU.
Sl. No. Item Description
1B/R Portion: -Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil and removal of soil upto 50 mtr complete all as specified and as directed.
2Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation etc, for laying of drain pipes etc and for manhole etc, not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified and as directed.
3PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in mass concrete, in foundation filling complete all as specified and as directed.
4RCC (1:2:4) nominal mix type B-1 (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete etc complete all as specified and as directed.Note: - Formwork will be measured and paid separately.
5RCC (1:2:4) nominal mix type B-1 (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and as directed.Note: - Formwork will be measured and paid separately.
6Description all as per Ser item No 5.00 here-in-before but as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.Note: - Formwork will be measured and paid separately.
7Providing reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in roof slabs supported on walls surfaces of concrete flat etc and in shelves complete all as specified and as directed.Note: - Formwork will be measured and paid separately.
8Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter etc complete all as specified and as directed.
9Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; as in shelves not exceeding 200 mm thick (Horizontal or sloping) fair finished flat surfaces etc complete all as specified and as directed.
10Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.
11Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and as directed.
12Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exceeding 10cm but not exceeding 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide etc complete all as specified and as directed.
13Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.
14Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
15Description all as per Ser item no 14.00 here-in-before but 5 mm dia and over and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed.
16Brick work with fly ash brick (old size brick), straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.
17Brick work with fly ash bricks, straight or curved on plan to any radius in half brick wall built in cement mortar (1:4) complete all as specified and as directed.
18Hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
1975 mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in floor as sub base complete all as specified and as directed.
2025 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate), as in sub base complete all as specified and as directed.
21Non skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm screed bed cement mortar (1:6) complete all as specified and as directed.
22Glazed ceramic colour tiles in vertical surface (450 x 350 x 7 mm) thick as in dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match the surface and including 10 mm thick rendering cement mortar (1:6) complete all as specified and as directed.
23Factory made solid PVC moulded door frame of size 50 x 100mm with wood free EPS and 2mm thick moulded PVC sheet allround supplying and fixing in wall at site as per manufacturer specification complete all as specified and as directed.
24Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed.
25Rendering 15mm thick on brick work or concrete surfaces on other than fair faces of brick work built in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and as directed.
26Rendering 15mm thick on brick work or concrete surfaces on fair faces of brick work built in cement mortar (1:4) and finished even and smooth without using extra cement with water proofing compound complete all as specified and as directed.Note: - WPC Will be measured and paid separately.
27Rendering 5mm thick in cement mortar (1:3) finished even and smooth on cement concrete surfaces as in ceiling complete all as specified and as directed.
28Provision of roof treatment with elastrometric water proofing membrane all as given below: -(a) Material and Labour for plastering 10mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge.(b) Applying one coat of primer of acrylic reinforcement liquid elastometric water proofing membrane with UV resistant properties and solar reflective properties (3:1 water dilution) on prepared surface with roller and allowed to dry.(c) Supply and applying two coats of undiluted thick coat of acrylic reinforcement liquid applied elastometric water proofing membrane with UV resistant properties and solar reflective properties before first coat insert smart care roof tape corner/ joints and allow it to dry than apply further second coat complete all as specified and as directed.Note: - Every coat time gap should be minimum 6 hrs and thickness of each coat 2-3mm).
2915 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and as directed.
3020 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and as directed.
3125 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and as directed.
32Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 litres and supply and fixing ball brass valve high pressure with polyethylene float and fly nut complete 20mm bore screwed to pipe for brass complete all as specified and as directed.
33Preparing plastered surface and applying three coats of white wash on wall complete all as specified and as directed.
34Preparing plastered surface and applying three coats of white wash on ceiling complete all as specified and as directed.
35Preparing plastered surface and applying two coats of cement base paint on wall over a coat of primer complete all as specified and as directed.
36Returning filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in each layers in hard/ dense soil complete all as specified and as directed.
37Removing excavated materials in soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.
3835 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part - I), kiln seasoned complete all as specified and as directed.
39Pressed steel frames (factory made) made out of 1.25 mm thick black mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 105 x 60mm including bottom of each chowkhat to be welded with 2 No's 25 x 25 x 3mm thick flat iron projecting 10 cm on either side complete all as specified and as directed.
40PCC (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling, bed block for hold fast etc complete all as specified and as directed.
41PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in coping, benching on corner of joints, as in roof kerbs rounded or chamfered on edges etc complete all as specified and as directed.
42100 mm size butt hinges medium weight cold rolled stainless steel complete all as specified and as directed.
43Aluminium handles 'D' type anodised 150 mm long ISI marked complete all as specified and as directed.
44Description all as per Ser item No 43.00 here-in-before but 125 mm long complete all as specified and as directed.
45200 mm long aluminium anodised barrel tower bolt of extruded section ISI marked complete all as specified and as directed.
46Description all as per Ser item No 45.00 here-in-before but 150 mm long complete all as specified and as directed.
47300 mm long dia 16mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.
48Preparing surface of new wood and wood based material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
49Preparing surface of new steel material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
5016 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite including taking down old complete all as specified and as directed.
51Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.
52Vitreous china squatting pan 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest and 'P' or 'S' trap and connection to flushing pipe, anti-syphonage pipe complete including provision of cement concrete bedding complete all specified in SSR part - I complete all as directed.
53Vitreous china white under counter wash basins (595 x 420 x 200 mm) oval shape, including waste pipe, brackets and connecting pipe fixed complete all as specified and as directed.
54PVC valveless, symphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.
55Low density PVC connections commercial quality 15mm bore with PTMT nuts of length 450mm complete all as specified and as directed.
56Low density PVC waste pipe 32 mm bore for flusing cistern complete all as specified and as directed.
5715 mm bore bib taps long nose/ long body, cast copper alloy chromium plated fancy type with capstan head handle screwed down, screwed for brass, weight not less than 450 gms ferrule and fixed complete all as specified and as directed.
5815 mm bore Angle valves, cast copper alloy chromium plated fancy type, half turn, screwed down, high pressure, with crutch or butterfly handle, weight not less than 450 gms screwed both ends for iron pipe or for unions complete all as specified and as directed.
5915 mm bore sawn neck pillar cock cast copper alloy, chromium plated with angular knob fixed to 15mm dia mild steel pipe complete with all fittings complete all as specified and as directed.
60Shower rose brass chromium plated with swivel joint of size 125 mm cast copper alloy chromium plated fancy type with chromium plated neck 9\\" long made to shape, weight not less than 350 gms complete all as specified and as directed.
6120 mm dia Gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
6275 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.
6375 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees laid in trenches or in floors complete all as specified and as directed.
64110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees laid in trenches or in floors complete all as specified and as directed.
65PVC (SWR) bends 110 mm radius complete all as specified and as directed.
66110 mm PVC (SWR) junction single (T) equal / Unequal complete all as specified and as directed.
67PVC (SWR) bends/ shoes any radius of 75 mm dia complete all as specified and as directed.
68PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and as directed.
69Description all as per Ser item No 68.00 here-in-before but 75 mm dia complete all as specified and as directed.
70PVC (SWR) vent cowl of radius of 75 mm dia complete all as specified and as directed.
7175mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and as directed.
72Stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 75 mm bore pipe complete all as specified and as directed.
73GI spout 25mm dia light grade, fixed to walls complete all as specified and as directed.
74Brass chromium plated towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and as directed.
75Mild steel peg set of six powder coated as approved by GE complete all as specified and as directed.
76Supply only liquid water proofing compound complete all as specified and as directed.
7750mm thick cement concrete (1:3:6) type C-2 (using 20mm graded crushed stone aggregate) as in floor/ plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 grade and three parts of sand (all by weight) complete all as specified and as directed.
78Supply and laying Vitreous china urinals, Half stall type (600 x 320 x 340mm) white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, brackets and chromium plated waste coupling including urinal spreader complete all as specified and as directed.
79Cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels complete all as specified and as directed.
80Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement complete all as specified and as directed.
81125 mm chromium plated stainless steel grating with or without waste hole complete all as specified and as directed.
82Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster (1: ½: 2) (1 cement : ½ coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings including taking down old plaster and two coats of cement based paint complete all as specified and as directed.
83Fancy type decorative pattern with selected quality glass 5.5mm thick bevelled edge fixed on wall with 4 Nos 15mm dia stainless steel mirror button stud complete all as specified and as directed.
84Soap dish steel chromium plated 100 mm size complete all as specified and as directed. Please Enable Macros to View BoQ information
85Soap dish steel chromium plated 100 mm size complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56660076
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 45.17 Lakhs
LAST DATE 14-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Certain Sanctioned Lbw And Revenue Works At Miran Sahib Under Ge Jammu.- 1 B/R Portion: -Surface Excavation Not Exceeding 30 Cm Deep And Averaging 15 Cm Deep And Getting Out In Any Type Of Soil And Removal Of Soil Upto 50 Mtr Complete All As Specified And As Directed. 2 Excavating In Trenches Not Exceeding 1.5M Wide And Not Exceeding 1.5 M In Depth For Foundation Etc, For Laying Of Drain Pipes Etc And For Manhole Etc, Not Exceeding 10 Sqm On Plan And Not Exceeding 1.5 M In Depth And Getting Out In Hard/ Dense Soil Complete All As Specified And As Directed. 3 Pcc (1:4:8) Type D-2 (Using 40Mm Graded Crushed Stone Aggregate) As In Mass Concrete, In Foundation Filling Complete All As Specified And As Directed. 4 Rcc (1:2:4) Nominal Mix Type B-1 (Using 20Mm Graded Crushed Stone Aggregate) As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under Reamed Piles And Mass Concrete Etc Complete All As Specified And As Directed.Note: - Formwork Will Be Measured And Paid Separately. 5 Rcc (1:2:4) Nominal Mix Type B-1 (Using 20Mm Graded Crushed Stone Aggregate) As In Columns, Pillars, Piers, Posts And Struts Etc Complete All As Specified And As Directed.Note: - Formwork Will Be Measured And Paid Separately. 6 Description All As Per Ser Item No 5.00 Here-In-Before But As In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span Etc Complete All As Specified And As Directed.Note: - Formwork Will Be Measured And Paid Separately. 7 Providing Reinforced Cement Concrete (1:2:4) Type B-1 (Using 20 Mm Graded Crushed Stone Aggregate) As In Roof Slabs Supported On Walls Surfaces Of Concrete Flat Etc And In Shelves Complete All As Specified And As Directed.Note: - Formwork Will Be Measured And Paid Separately. 8 Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams And Similar Work; Vertical Or To Batter Etc Complete All As Specified And As Directed. 9 Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work; As In Shelves Not Exceeding 200 Mm Thick (Horizontal Or Sloping) Fair Finished Flat Surfaces Etc Complete All As Specified And As Directed. 10 Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc Complete All As Specified And As Directed. 11 Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Etc Complete All As Specified And As Directed. 12 Formwork To Edges Of Concrete Flats, Treads, Breaks In Floors, Window Cills, Concrete Railings, Openings In Concrete Walls, Floor And Roofs Exceeding 10Cm But Not Exceeding 20 Cm Wide And Sides Of Rcc/ Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exceeding 10Cm But Not Exceeding 20Cm Wide Etc Complete All As Specified And As Directed. 13 Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar (1:3) To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc. And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc. And Making Good, Cutting Not Exceeding 10 Cm Girth Complete All As Specified And As Directed. 14 Mild Steel Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hopping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And As Directed. 15 Description All As Per Ser Item No 14.00 Here-In-Before But 5 Mm Dia And Over And Including 10Mm Dia In Stirrups, Spacers And Binders Etc Complete All As Specified And As Directed. 16 Brick Work With Fly Ash Brick (Old Size Brick), Straight Or Curved On Plan Exceeding 6 M Mean Radius Built In Cement Mortar (1:6) Complete All As Specified And As Directed. 17 Brick Work With Fly Ash Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Wall Built In Cement Mortar (1:4) Complete All As Specified And As Directed. 18 Hardcore Of Gauge Not Exceeding 63 Mm Of Broken Stone Or Boulders, Deposited, Spread And Levelled In Layers Not Exceeding 15 Cm Thick, Watered And Rammed To A True Surface Complete All As Specified And As Directed. 19 75 Mm Thick Pcc (1:4:8) Type D-2 (Using 40Mm Graded Crushed Stone Aggregate) In Floor As Sub Base Complete All As Specified And As Directed. 20 25 Mm Thick Pcc (1:2:4) Type B-0 (Using 12.5Mm Graded Crushed Stone Aggregate), As In Sub Base Complete All As Specified And As Directed. 21 Non Skid Ceramic Colour Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm In Floor Etc, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Including 15 Mm Screed Bed Cement Mortar (1:6) Complete All As Specified And As Directed. 22 Glazed Ceramic Colour Tiles In Vertical Surface (450 X 350 X 7 Mm) Thick As In Dados, Skirting Etc, Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match The Surface And Including 10 Mm Thick Rendering Cement Mortar (1:6) Complete All As Specified And As Directed. 23 Factory Made Solid Pvc Moulded Door Frame Of Size 50 X 100Mm With Wood Free Eps And 2Mm Thick Moulded Pvc Sheet Allround Supplying And Fixing In Wall At Site As Per Manufacturer Specification Complete All As Specified And As Directed. 24 Factory Made Solid Pvc Moulded Door Shutter With Wood Free Eps, 28 To 30Mm Thick (Stiles), With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face And 2Mm Plain Colour Pvc Sheet On Back Face, Supplying And Fixing In Frame At Site As Per Specification And Drawing Complete All As Specified And As Directed. 25 Rendering 15Mm Thick On Brick Work Or Concrete Surfaces On Other Than Fair Faces Of Brick Work Built In Cement Mortar (1:6) And Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 26 Rendering 15Mm Thick On Brick Work Or Concrete Surfaces On Fair Faces Of Brick Work Built In Cement Mortar (1:4) And Finished Even And Smooth Without Using Extra Cement With Water Proofing Compound Complete All As Specified And As Directed.Note: - Wpc Will Be Measured And Paid Separately. 27 Rendering 5Mm Thick In Cement Mortar (1:3) Finished Even And Smooth On Cement Concrete Surfaces As In Ceiling Complete All As Specified And As Directed. 28 Provision Of Roof Treatment With Elastrometric Water Proofing Membrane All As Given Below: -(A) Material And Labour For Plastering 10Mm Thick In Cement Mortar (1:3) Using 100% Coarse Sand On Roof Surface Including Water Proofing Compound As Per ManufacturerS Instructions And As Directed By Engineer-In-Charge.(B) Applying One Coat Of Primer Of Acrylic Reinforcement Liquid Elastometric Water Proofing Membrane With Uv Resistant Properties And Solar Reflective Properties (3:1 Water Dilution) On Prepared Surface With Roller And Allowed To Dry.(C) Supply And Applying Two Coats Of Undiluted Thick Coat Of Acrylic Reinforcement Liquid Applied Elastometric Water Proofing Membrane With Uv Resistant Properties And Solar Reflective Properties Before First Coat Insert Smart Care Roof Tape Corner/ Joints And Allow It To Dry Than Apply Further Second Coat Complete All As Specified And As Directed.Note: - Every Coat Time Gap Should Be Minimum 6 Hrs And Thickness Of Each Coat 2-3Mm). 29 15 Mm Dia Galvanized Pipes Medium Grade With All Fittings And Fixed Complete Wall And Ceiling Or Laid In Floors Complete All As Specified And As Directed. 30 20 Mm Dia Galvanized Pipes Medium Grade With All Fittings And Fixed Complete Wall And Ceiling Or Laid In Floors Complete All As Specified And As Directed. 31 25 Mm Dia Galvanized Pipes Medium Grade With All Fittings And Fixed Complete Wall And Ceiling Or Laid In Floors Complete All As Specified And As Directed. 32 Rotational Moulded Polyethylene Water Tank (Cylindrical Vertical Closed Top) Hoisted And Fixed In Position Capacity Of Tank 1000 Litres And Supply And Fixing Ball Brass Valve High Pressure With Polyethylene Float And Fly Nut Complete 20Mm Bore Screwed To Pipe For Brass Complete All As Specified And As Directed. 33 Preparing Plastered Surface And Applying Three Coats Of White Wash On Wall Complete All As Specified And As Directed. 34 Preparing Plastered Surface And Applying Three Coats Of White Wash On Ceiling Complete All As Specified And As Directed. 35 Preparing Plastered Surface And Applying Two Coats Of Cement Base Paint On Wall Over A Coat Of Primer Complete All As Specified And As Directed. 36 Returning Filling Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exceeding 25 Cm In Each Layers In Hard/ Dense Soil Complete All As Specified And As Directed. 37 Removing Excavated Materials In Soil To A Distance Not Exceeding 50M And Depositing Where Directed At A Level Not Exceeding 1.50M Above The Starting Point Complete All As Specified And As Directed. 38 35 Mm Thick Plain Framed, Panelled Shutter (Two Panel) With Lock Rail And Panel Of 9 Mm B.W.P. Commercial Ply Or 12 Mm Veneered Particle Board With Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per Is : 1003 (Part - I), Kiln Seasoned Complete All As Specified And As Directed. 39 Pressed Steel Frames (Factory Made) Made Out Of 1.25 Mm Thick Black Mild Steel Sheet For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete Size Of Frame 105 X 60Mm Including Bottom Of Each Chowkhat To Be Welded With 2 NoS 25 X 25 X 3Mm Thick Flat Iron Projecting 10 Cm On Either Side Complete All As Specified And As Directed. 40 Pcc (1:3:6) Type C-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Back Filling, Bed Block For Hold Fast Etc Complete All As Specified And As Directed. 41 Pcc (1:2:4) Type B-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Coping, Benching On Corner Of Joints, As In Roof Kerbs Rounded Or Chamfered On Edges Etc Complete All As Specified And As Directed. 42 100 Mm Size Butt Hinges Medium Weight Cold Rolled Stainless Steel Complete All As Specified And As Directed. 43 Aluminium Handles D Type Anodised 150 Mm Long Isi Marked Complete All As Specified And As Directed. 44 Description All As Per Ser Item No 43.00 Here-In-Before But 125 Mm Long Complete All As Specified And As Directed. 45 200 Mm Long Aluminium Anodised Barrel Tower Bolt Of Extruded Section Isi Marked Complete All As Specified And As Directed. 46 Description All As Per Ser Item No 45.00 Here-In-Before But 150 Mm Long Complete All As Specified And As Directed. 47 300 Mm Long Dia 16Mm Aluminium Alloy, Anodized, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Section And Fixing Bolts And Sliding Bolts Of Extruded Section Complete All As Specified And As Directed. 48 Preparing Surface Of New Wood And Wood Based Material Of Any Description And Girth, Not Otherwise Described And Treated With Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And As Directed. 49 Preparing Surface Of New Steel Material Of Any Description And Girth, Not Otherwise Described And Treated With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Complete All As Specified And As Directed. 50 16 To 18 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window-Cills Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing Into White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match Shade Of Granite Including Taking Down Old Complete All As Specified And As Directed. 51 Providing Edge Moulding To 18-20Mm Thick Granite Stone Of Counters Vanities Etc. Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete All As Specified And As Directed. 52 Vitreous China Squatting Pan Orissa Pattern, Size 580 X 440 Mm White, With Integral Foot Rest And P Or S Trap And Connection To Flushing Pipe, Anti-Syphonage Pipe Complete Including Provision Of Cement Concrete Bedding Complete All Specified In Ssr Part - I Complete All As Directed. 53 Vitreous China White Under Counter Wash Basins (595 X 420 X 200 Mm) Oval Shape, Including Waste Pipe, Brackets And Connecting Pipe Fixed Complete All As Specified And As Directed. 54 Pvc Valveless, Symphonic Action Type, Flushing Cistern, 10 Litres Capacity, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Brackets Complete All As Specified And As Directed. 55 Low Density Pvc Connections Commercial Quality 15Mm Bore With Ptmt Nuts Of Length 450Mm Complete All As Specified And As Directed. 56 Low Density Pvc Waste Pipe 32 Mm Bore For Flusing Cistern Complete All As Specified And As Directed. 57 15 Mm Bore Bib Taps Long Nose/ Long Body, Cast Copper Alloy Chromium Plated Fancy Type With Capstan Head Handle Screwed Down, Screwed For Brass, Weight Not Less Than 450 Gms Ferrule And Fixed Complete All As Specified And As Directed. 58 15 Mm Bore Angle Valves, Cast Copper Alloy Chromium Plated Fancy Type, Half Turn, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Weight Not Less Than 450 Gms Screwed Both Ends For Iron Pipe Or For Unions Complete All As Specified And As Directed. 59 15 Mm Bore Sawn Neck Pillar Cock Cast Copper Alloy, Chromium Plated With Angular Knob Fixed To 15Mm Dia Mild Steel Pipe Complete With All Fittings Complete All As Specified And As Directed. 60 Shower Rose Brass Chromium Plated With Swivel Joint Of Size 125 Mm Cast Copper Alloy Chromium Plated Fancy Type With Chromium Plated Neck 9\ Long Made To Shape, Weight Not Less Than 350 Gms Complete All As Specified And As Directed. 61 20 Mm Dia Gun Metal, Globe Or Gate Valve With Iron Wheel Head, Screwed Both Ends For Iron Pipe Complete All As Specified And As Directed. 62 75 Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints, Bends, Tees Complete Fixed To Walls At Any Height Complete All As Specified And As Directed. 63 75 Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints, Bends, Tees Laid In Trenches Or In Floors Complete All As Specified And As Directed. 64 110 Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints, Bends, Tees Laid In Trenches Or In Floors Complete All As Specified And As Directed. 65 Pvc (Swr) Bends 110 Mm Radius Complete All As Specified And As Directed. 66 110 Mm Pvc (Swr) Junction Single (T) Equal / Unequal Complete All As Specified And As Directed. 67 Pvc (Swr) Bends/ Shoes Any Radius Of 75 Mm Dia Complete All As Specified And As Directed. 68 Pvc (Swr) Bends Any Radius Provided With Access Door Of 110Mm Dia Complete All As Specified And As Directed. 69 Description All As Per Ser Item No 68.00 Here-In-Before But 75 Mm Dia Complete All As Specified And As Directed. 70 Pvc (Swr) Vent Cowl Of Radius Of 75 Mm Dia Complete All As Specified And As Directed. 71 75Mm Pvc (Swr) Floor Trap, Plain With Grating Including Jointing With Solvent Cement Including Jointing To Waste Pipe Fixed In Cement Concrete (1:2:4) Type B-1 Complete All As Specified And As Directed. 72 Stack Clamps Made Out Of 50Mm X 5Mm Flat Iron And 16Mm Dia Round Iron Stays Including Bolts And Nuts And Securing Ends Of Stay To Walls Or Roof For 75 Mm Bore Pipe Complete All As Specified And As Directed. 73 Gi Spout 25Mm Dia Light Grade, Fixed To Walls Complete All As Specified And As Directed. 74 Brass Chromium Plated Towel Rail 20 Mm Dia D Type 60 Cm Long Between Flanges Complete All As Specified And As Directed. 75 Mild Steel Peg Set Of Six Powder Coated As Approved By Ge Complete All As Specified And As Directed. 76 Supply Only Liquid Water Proofing Compound Complete All As Specified And As Directed. 77 50Mm Thick Cement Concrete (1:3:6) Type C-2 (Using 20Mm Graded Crushed Stone Aggregate) As In Floor/ Plinth Protection Laid In Suitable Panels Finished Even And Fair All As Specified. 6Mm Joints Should Be Filled With Bitumen Mastic Filling Comprising Of One Part Of Heated Bitumen 85/25 Or 80/100 Grade And Three Parts Of Sand (All By Weight) Complete All As Specified And As Directed. 78 Supply And Laying Vitreous China Urinals, Half Stall Type (600 X 320 X 340Mm) White With Grating And Union For Discharge Pipe Complete Including Providing And Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar (1:2), Securing Urinal To Plugs With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Fixing Automatic Flushing Cistern With Brackets, Flush Pipe, Grating And Union For Discharge Pipe, Brackets And Chromium Plated Waste Coupling Including Urinal Spreader Complete All As Specified And As Directed. 79 Cement Concrete (1:3:6) Type C-2 (Using 40 Mm Graded Crushed Stone Aggregate) As In Surface Channels Complete All As Specified And As Directed. 80 Extra For Forming Fair Finished Drain Or Channel 30 Cm Inner Girth In Cement Concrete Using Extra Cement Complete All As Specified And As Directed. 81 125 Mm Chromium Plated Stainless Steel Grating With Or Without Waste Hole Complete All As Specified And As Directed. 82 Washed Stone Grit Plaster On Exterior Walls In Two Layers, Under Layer 12Mm Cement Plaster (1:4) (1 Cement : 4 Coarse Sand) Furrowing The Under Layer With Scratching Tool, Applying Cement Slurry On The Under Layer @ 3 Kg Of Cement Per Square Metre, Top Layer 15Mm Cement Plaster (1: ½: 2) (1 Cement : ½ Coarse Sand : 2 Stone Chipping 10Mm Nominal Size) In Panels With Groove All Around As Per Approved Pattern Including Scrubbing And Washing The Top Layer With Brushes And Water To Expose The Stone Chippings Including Taking Down Old Plaster And Two Coats Of Cement Based Paint Complete All As Specified And As Directed.
Basic Detail
Tender No GEC-23/2026-27
Bidding Type Tender
Location
City Jammu
State Jammu and Kashmir
Key Dates
Publish Date 24 Jul 2026
Submission Date 14 Aug 2026
Open Date 17 Aug 2026
Finance
Tender Value 45.17 Lakhs
Tender Fee 500
EMD 90340
Exemption Available
Document List
8475b502-0a2f-4a07-bfa0-489cca1d7140.html
BOQ_874306.xls
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 24, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 14, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Aug 17, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
html

8475b502-0a2f-4a07-bfa0-489cca1d7140.html

xls

BOQ_874306.xls

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders