Tender For Special Repair To Certain Otm Accommodation At Ta Bn At Bana Enclave At Bd Bari Mil Stn Under Ge Kaluchak
Tender Value
38.83 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
15 days left
EMD
77700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kaluchak → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Certain Otm Accommodation At Ta Bn At Bana Enclave At Bd Bari Mil Stn Under Ge Kaluchak
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of AC corrugated sheets of any thickness as in roofs including ridge all as specified complete all as specified and directed. |
| 2 | S&F , prepainted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering /cladding to wall, fixed with self taping screws complete all as specified and directed. |
| 3 | S&F , prepainted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering /cladding to wall, fixed with self taping screws as in ridge covering. complete all as specified and directed. |
| 4 | Dismantling timber scantlings 40 sq. cm and over in section, in framed work complete as specified and directed. |
| 5 | S&F `Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcconforming to Fe 410 W (gde E-250) Quality A complete all as specified and directed. |
| 6 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410 W (gde E-250) complete all as specified and directed. |
| 7 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachementconforming to Fe 410 W (gde E-250) quality A complete all as specified and directed. |
| 8 | S&F mild steel purpose made bolts of diameter of neck exc 12 mm but n.exc 20 mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or sqare n.exc 30 cm long complete all as specified and directed. |
| 9 | Demolition of reinforced cement concrete ( reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 10 | M&L for cement concrete type B1 (1:2:4) using 20 mm graded as in beams, cantilevers, bressummers, lintls over 1.5 m span complete all as specified and as directed. |
| 11 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup ports, overhangs, etc also spays between floors and beams etc complete all as specified and directed. |
| 12 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia) or securing with clips complete all as specified and directed. |
| 13 | --- ditto ---- but 5 to 10 mm dia as in stirrups, complete all as specified and directed. |
| 14 | Demolition of brick /stone masonry built in cement nortar of any description complete all as specified and directed. |
| 15 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed |
| 16 | M&L Taking down cement plaster any description incl racking out joints, hacking for key scrubbing down with water,etc complete all as specified and directed. |
| 17 | M & L for 15mm thick rendering on brick masonary or concrete surface of walls, in CM 1:6 including finished the surface smooth and even without using extra cement complete all as specified and directed. |
| 18 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. complete all as specified and directed. |
| 19 | Supply only integral WPC complete all as specified and directed. |
| 20 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness all as specified . |
| 21 | M&L for Suspended false ceiling system using 4mm thick high pressure steam cured fibre cement pre-primed textured varient E-board (classic), ISI marked, conforming to IS:14982-2000 over and including GI snap grid frame work for false ceiling, grid size 605 x 605 mm with GI angle of size 24x24mm, main runner ‘T’ of size 24x38mm, secondary runner ‘T’ of size 24x28mm with 6mm GI wire with butterfly clips for leveling, fastners, supports, plugs to walls/joists etc all as per manufacturer’s Instructions, including making holes, cutting chasis and making good existing walls in cement mortar 1:3 or PCC 1:2:4 type B1, complete all as specified and directed. Note : All steel members shall be hot dipped galvanised with zinc coating not less than 120 gm/sqm. |
| 22 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.50 Sqm each complete all as specified and as directed. |
| 23 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 sqm & not exceeding 4 sqm each complete all as specified and directed |
| 24 | S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, keys , hinges lock, lock strike plate etc.made out of 1.25mm thick MS sheet including one shop coat of red oxide zinc chrome primer etc complete all as specified and directed . |
| 25 | M&L 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with both face is covered with deco rative face veneer with lipping/frame to match complete all as specified and directed. |
| 26 | S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters open rebated & prepare to receive glass, gauge etc (without sash bars /edges of framing plain chamfered or rounded, fitted with cut and mitred beds for securing glass etc) size of members of shutters as spd in SSR Part-I section-8 clause 8.2 (A). complete all as specified and directed. |
| 27 | S&F for Box type steel windows comprising of tubular frame and shutters made out of 1.25mm thick MS steel tube, factory made, with double side shutters wire gauged shutter and glass glazed shutter (wire and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to F1 frame work, including other fittings, hinges, handles tarred hold fasts PCC blocks etc all as shown on Drawing No CEPZ/TD-354/09 sheet 1/3 to 3/3 including taking down old steel window of any size icluding taking down /up complete all as specified and directed. |
| 28 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (both type) 300mm longh, and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 29 | S&F Aluminium anodised 150mm long barrel tower bolt of extruded section and fixing complete all as specified and directed |
| 30 | S&F Aluminium handles cast type anodised 150mm complete all as specified and directed |
| 31 | S&F Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel springs, fixed in floor with over all length of cover plate 150mm complete all as specified and directed. |
| 32 | S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 33 | M&L PCC 1:3:6 type C - 1 (using 20 mm graded crushed stone aggregate) as in back filling of chowkats and bed blocks for hold fasts etc complete all as specified and directed. |
| 34 | M&L for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with 2nd class soft wooden beadings all as specified and directed |
| 35 | Roughening surfaces of old concrete floor by picking, sweeping clean, and washing down with water to remove dust etc. |
| 36 | M&L Brushing neat cement slurry with 3.00 Kg of cement per sqm complete all a specified and directed. |
| 37 | M&L for Non - skid ceramic coloured jointless tile 400mm x 400mm x 7mm thick as in floors laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete, all as specified and directed. |
| 38 | M&L for Non - skid ceramic coloured jointless tiles 400mm x 400mm x 7 mm thick on vertical surfaces such as skirting /dado etc bedded & jointed in neat cement slurry over and including 10 mm thick backing coat of cement mortar 1:4 and pointed in white or coloured cement to match the colour of tiles complete, all as specified and directed. |
| 39 | Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 40 | M&L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed.(Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners. |
| 41 | S&F Fancy type drapery rod 20 mm dia fixed to side brackets golden glob fixed in repair complete all as specified and directed. |
| 42 | S&F MS Bracket powder coated for holding curtain rod fixed with screws to walls as approved by Engr-In-Charge fixed in repair complete all as specified and directed. |
| 43 | S&F Fiber fancy dome type corner ends fixed to curtain rod 20mm dia fixed in repair complete all as specified and directed. Please Enable Macros to View BoQ information |
| 44 | S&F Fiber fancy dome type corner ends fixed to curtain rod 20mm dia fixed in repair complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender