Tender For Provision Of Ms Structure With Tensile Fiber Cloth Roof Near Urc Mcte Under Ge (Mcte) Mhow
Tender Value
48.59 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
18 days left
EMD
87180
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Ms Structure With Tensile Fiber Cloth Roof Near Urc Mcte Under Ge (Mcte) Mhow
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m deep in soft/ loose soil and getting out complete all as specified and directed. |
| 2 | Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed. |
| 3 | Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. |
| 4 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in mass concrete as in foundation filling and mass concrete complete all as specified and directed |
| 5 | M&L for RCC 1:1:5:3 type A1 (using 20mm graded aggregate) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 6 | M&L for Mild steel TMT bars 10mm dia and over as reinforcement, cut to length, bent to shape required, including cranking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chips, complete all as specified and directed. |
| 7 | All as per Srl item No. 6.00 above but for 5mm dia and over upto and including 10mm dia in stirrups, spacers and benders, complete all as specified and directed. |
| 8 | Form work to sides & soffits of plinth beam and sides of footings getting rough finished surfaces of concrete complete all as specified and directed. |
| 9 | Form work to sides of columns getting rough finished surfaces of concrete complete all as specified and directed. |
| 10 | M&L for rolled section/ hollow tube section as in post, truss, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecction plates including drilling hole for bolting connecting to gusset plate etc. complete all as specified and directed. |
| 11 | S&F MS plates (plain or chequered) channel square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410 W, complete all as specified and directed. |
| 12 | S&F for PVC tensile fabric structure with PVDF (polyvinyl-idene-fluoride) coating with steel cables and GI corner fitting, nuts and bolts and associated accessories, all necessary fixtures, of any size and shape for making canopies, shed etc. fixed with mild steel structural frame work, weight of the fabric is considered with fabrics ranging from 900 gsm to 1200 gsm. The tensioned membrane structure shall include fabric, Wire Ropes and Cables, Shackles, Rigging Screws, Clamps and tensioning hardware, complete all as specified and directed.Note:- (a) The shape/ design of the sheds will be as approved by GE.(b) Cost of structural steel used well be measured and paid separetly under |
| 13 | S&F framed work such as grills, gratings, gates etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed. |
| 14 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender