Tender For Addition Alteration To Building No P-386 At Military Station Agartala
Tender Value
9.80 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
18 days left
EMD
19040
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
agartala → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Building No P-386 At Military Station Agartala
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Material & Labour for non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.18sqm but not exc 0.36 sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor tiles complete all as specified and directed. |
| 3 | Material & Labour for non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm as in skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match including 10 mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 4 | M&L for glazed ceramic coloured tiles 350 x 250 x 7 /450 x300x7 mm thick on skiriting/ dado, set & jointed in neat cement slurry & pointed with white/coloured to match including 10 mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 5 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 6 | M&L for Cement concrete type D-2, 1:4:8 (40 mm grade aggregate) 100mm thick in Sub base floors complete all as specified and as directed. |
| 7 | Material and labour 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection finished fair and even w/o using extra cement and making groove of 10mm width at every 3m intervals and at diagonals and filling the joints with bitumen mastic( a mix of bitumen and sand in 1:1 by weight) complete all as specified and directed. |
| 8 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 9 | M&L Brick work with sub class B bricks straight or curved on plan exe 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed |
| 10 | M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 complete all as specified and as directed |
| 11 | M & L 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 to be finished fair and even with out using extra cement complete all as specified . |
| 12 | M & L 10mm thick rendering on other than fair faces of brick work or concrete surface in cement mortar 1:6 to be finished fair and even with out using extra cement complete all as specified and directed. |
| 13 | M & L for 5 mm thick rendering in CM (1:3) on fair face of concrete surfaces as in ceiling,chajjas etc finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | M&L for applying two coats of cement base paint over a coat of primer, white or tinted on new wall surface including preparation of surface complete as specified and directed. |
| 15 | M & L two coat of oil bound distemper over a coat of chalk whitening on new unplastered wall Surface including preparation of new surfaces complete as specified and directed. |
| 16 | M&L for preparation of new plastered ceiling ,chajjas surfaces and applying two coats of white wash over it complete all as specified and directed. |
| 17 | M&L for complete removal of existing treatment on wall surface and applying two coats of cement base paint white or tinted over a coat of primer on old wall surface including preparation of surface complete all as specified and directed. |
| 18 | M&L for preparation of old painted surface applying one coats of cement based paint white or tinted on old wall surface complete all as specified and directed. |
| 19 | M&L for preparation of old painted surface applying one coats of oil bound distemper white or tinted on old wall surface complete all as specified and directed. |
| 20 | M & L for a coat of white wash on ceiling or chajjas including preparation of old surfaces complete all as specified and directed. |
| 21 | S & F Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm as specified and suspended with Hangers 6 mm dia. G.I. complete all as specified and directed. |
| 22 | S&F for 4 mm thick Non asbestos fibre cement building board (E- Board) for fixed to Aluminium frame work with screws as in ceiling complete as specified and as directed. |
| 23 | M & L for preparation of new surfaces over ceiling and applying two coats of oil bound distemer over a coat of priming on board complete all as specified and directed. |
| 24 | Dismantling of AC sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering complete all as specified and as directed |
| 25 | M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified and directed. |
| 26 | M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified and directed. |
| 27 | M&L for one coat of synthetic enamelled paint on steel surfaces over 10 cm width or girth including preparation of old surfaces. |
| 28 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 29 | S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete all as specified and as directed |
| 30 | M&L for 2 coats of synthetic enamelled paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces complete all as specified and as directed. |
| 31 | Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil. |
| 32 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil |
| 33 | M & L hard core of gauge n. exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surfaces in broken bricks. |
| 34 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate |
| 35 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil. |
| 36 | Removing excavated soil exc 250m but n exc. 500m & depositing where directed at a level n exc. 1.5 m above the starting point |
| 37 | M&L for M-20 Nominal Mix , 20 mm aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 38 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat complete all as specified and directed. |
| 39 | M&L RCC M-20 Nominal Mix using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 40 | M&L for Fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and directed. |
| 41 | M&L RCC M-20 Nominal Mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 42 | M&L for Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed. |
| 43 | M&L RCC M-20 Nominal Mix using 20 mm graded aggregate in Chajjas |
| 44 | M&L Formwork to chullah hoods, chajjas, troughs & similar items including edges Fair finished surfaces of concrete flat complete all as specified and directed. |
| 45 | M&L for TMT bars 10 mm dia and over, cut to lengh, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 46 | All as per item ser No. 45 but as in stirrups, spacers and binder, 8mm dia TMT bar |
| 47 | M&L for Sand filling under floors or in foundation including watering & consolidation |
| 48 | Taking down chowkat with shutter/without taking off shutter from the frame exe 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed. |
| 49 | S&F powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 4.0mm thick plain/tinted glass and SS wire mesh and making good the surface complete all as specified and directed |
| 50 | M&L for fabrication and fixing of anodised Powder Coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6mm x 44.45mm x 2mm and section of bottom and top rail of section114mmx44.45mmx2mm thick and and lock rail shutter frame of 83mm x 44.45mm x 2 mm with and including panels of 5.0 mm thick plain/frosted float glass,and with anodised aluminium snap beading of size 18.2mmx16.66mm scred for fixing fully including all necessary fittinngsand EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter ,1 no heavy duty door closer, 1no 200mm long aluminium tower bolt and 3Nos 125 mm long Stainless steel Butt hingeds per shutter one complete all as specified and as directed. |
| 51 | S&F vitreous china wash basin, white, flat back, size 450x300m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed. |
| 52 | S&F pillar taps 15 mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 53 | S&F 15 mm stop valves (angular type), cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed . |
| 54 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed . |
| 55 | S&F 50mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or innfloors etc complete all as specified and directed. |
| 56 | Supply and fix 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and directed. |
| 57 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside for schedule of credit to contactor including making good of the disturbed surfaces, all as specified and directed. Please Enable Macros to View BoQ information |
| 58 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside for schedule of credit to contactor including making good of the disturbed surfaces, all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender