Tender For Provision Of Single Accommodation Under Ge (N) Binnaguri

Sharing tender

Tender For Provision Of Single Accommodation Under Ge (N) Binnaguri=- 1 Part-I : (B/R Works) Excavation In Trenches N.Exc 1.5M Wide And N. Exc 1.5 M In Depth For Foundation Etc Or For Shafts, Wells, Cesspits, Manholes, Pier Holes Etc N. Exc 10 Sqm On Plan And N.Exc 1.5M In Depth And Getting Out In Soft/Loose Soil Complete All As Per Specified And As Directed. 2 Rough Excavation Not Exceeding 1.5 M Wide Not Exceeding 1.5M Deep And Getting Out In Soft/Loose Soil Complete All As Per Specified And As Directed. 3 Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers N Exc 25Cm Complete All As Per Specified And As Directed. 4 M&L For Sand Filling Layer Over Sub Base Or Under Floors Or Foundation Including Watering And Consolidation, Complete All As Per Specified And As Directed.(Note: Only Punned Down Volume Of Sand To Be Measured) 5 M&L For Sand Cushioning (Dry) In Trenches For Protection Of Ug Cables (Below, Above And Around The Cable Laid In Trenches) Of 8Cm Deep Before Laying And 15Cm Covering Above The Top Edge Of Cable After Laying, Complete All As Specified And As Directed.(Note: Only Punned Down Volume Of Sand To Be Measured) 6 Removing Excavated Material Not Exc. 50 M & Depositing Where Directed At A Level Not Exc. 1.5 M Above Starting Point Complete All As Per Specified And As Directed. 7 M&L For Hardcore Of Gauge Not Exc. 63Mm Deposited, Spread And Levelled In Layers Not Exc. 15 Cm Thick, Watered And Rammed To A True Surface Of Broken Stone Or Boulders, Complete All As Per Specified And As Directed. 8 M&L For Approved Earth Filling In Floors Or Pavings, Laid In Layers N Exc. 15 Cm Thick, Spread, Levelled And Rammed Including Watering, Complete All As Specified And As Directed.Note : The Earth Filling Work Shall Be Mesured After Consolidation. 9 M&L For Anti-Termite Treatment, Treating The Bottom And Sides Of Excavation At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Area, Complete All As Per Specified And As Directed. 10 M&L For Anti-Termite Treatment, Treating The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (Area Of The Sub Structure In Contact With Backfill To Be Measured), Complete All As Per Specified And As Directed. 11 M&L For Anti-Termite Treatment, Treating The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface, Complete All As Per Specified And As Directed. 12 M&L For Anti-Termite Treatment, Treating The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Area, Complete All As Per Specified And As Directed. 13 M&L For Anti-Termite Treatment, Treating The Soil Along With External Perimeter Of Building At The Rate Of 2.25 Litre Of Emulsion Per Metre Of The Perimeter Wall, Complete All As Per Specified And As Directed. 14 M&L For Pcc 1:3:6 Type C2 (Using 40Mm Graded Crushed Stone Aggregate) As In Foundation, Filling And Mass Concrete Complete All As Per Specified And As Directed. 15 M&L For Precast Cement Concrete (1:2:4) Type B1 (Using 20 Mm Graded Crushed Stone Aggregate) As In Landings, Cover Slabs (For Man Holes Etc.) Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves And Similar Articles With Plain Faces Set In Cement Mortar 1:6, Complete All As Specified And As Directed. 16 M&L For Providing Plain Cement Concrete Type C-1, 1:3:6, (Using 20 Mm Graded Stone Aggregate), As In Copings, Bed Block For Filing Hollow Space Of Steel Chowkhats, Fixing Of Hold Fast, Kneelers, Apex Stones, Bed Plates, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles & Throating As Directed Including Necessary Form Work, Complete All As Per Specified And As Directed . 17 M&L For Rcc M25 (Design Mix) As In Foundations, Including Rafts, Footings, Foundation Beams, Plinth Beams, Bases For Columns, Etc. Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And As Directed. 18 M&L For Rcc M25 (Design Mix) As In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like Complete All As Specified And As Directed. 19 M&L For Rcc M25 (Design Mix) As In Chajjas Etc. Complete All As Specified And As Directed. 20 M&L For Rcc M25 (Design Mix) As In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span Complete All As Specified And As Directed. 21 M&L For Rcc M25 (Design Mix) As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And As Directed. 22 Supply Only Liquid Water Proofing Compound Confirming To Is Complete All As Per Specified And As Directed. 23 M&L For Fly Ash Brick Work With Old Size Bricks, Straight Or Curved On Plan Exc. 6M Mean Radius In Cement Mortar 1:4, Complete All As Per Specified And As Directed. 24 M&L For Fly Ash Brick Work With Old Size Bricks, Straight Or Curved On Plan Exc. 6M Mean Radius In Cement Mortar 1:6, Complete All As Per Specified And As Directed. 25 M&L For Brick Work With Fly Ash Old Sized Bricks Straight Or Curved On Plan In Cm 1:4 As In Half Brick Thick Walls, Complete All As Specified And As Directed. 26 M&L For Brick Covering With Width Equal To Length Of Brick As Protection To Cable With Well Burnt Sub Class ‘B’ Bricks Of Size 230Mm X 125Mm X .75Mm Laid Dry Flat Complete All As Specified And Directed. 27 M&L For Formwork To Sides Of Concrete Foundation, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter Fair Finished Surface Of Concrete Flat Complete All As Per Specified And As Directed. 28 M&L For Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work Not Exceeding 200 Mm Thick (Horizontal Or Sloping) Including Edges Fair Finished Surface Of Concrete Flat Complete All As Specified And As Directed. 29 M&L For Formwork To Chullah Hoods, Chajjas, Weather Shades, Corbels, Water Troughs And Similar Items Including Edges, Rough Finished Surfaces Of Concrete Flat Etc., Complete All As Per Specified And As Directed. 30 M&L For Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. Rough Finished Surfaces Of Concrete Flat Etc., Complete All As Per Specified And As Directed. 31 M&L For Form Work For Side Of Square, Rectangular Or Polygonal Pillars, Posts, Columns & Similar Works Vertical Or Batter Rough Finished Surfaces Of Concrete Complete All As Specified And As Directed. 32 Use And Waste Of Formwork To Edges Of Rough Finished Surfaces Of Concrete Flats, Treads, Breaks In Floors, Window Cills, Concrete Railings, Openings In Concrete Walls, Floor And Roofs N Exc 20 Cm Wide And Sides Of Rcc/ Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10Cm But N Exc 20Cm Wide, Complete All As Per Specified And As Directed. 33 S&F Of 35 Mm Thick Approved Factory Made Flush Shutters, Solid Core Construction, With Block Board Core And Plywood Face Panels, Commercial Type On Both Sides, Complete All As Per Specified And As Directed. 34 M&L For 35 Mm Thick Approved Factory Made Second Class Hardwood Glazed And Skeleton Shutter Open Rebated And Prepared To Receive Glass, Gauge Etc (Without Sash Bar) For Fly Proof Door Shutter, Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Sizes Of Member (Bottom 250Mm, Stiles 100Mm, Top 120Mm & Lock Rail 160Mm Wide) As Specified In Ssr Part I Section & Clause 8.24 (A) Complete All As Specified And As Directed. 35 S&F Of Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing Complete All As Per Specified And As Directed. 36 Supply And Fixing Of Factory Made Solid Panel Factory Made Solid Pvc Moulded Door Shutter, 28 To 30Mm Thick (Stiles), With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face & 2Mm Plain Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site As Per Specification & Drawing Complete All As Per Specified And As Directed. 37 Providing And Fixing Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Decorative Type Flush Door Shutter Of Size 30Mm Thick Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Having Minimum Density Of 650 Kg/Cum And Screw Withdrawal Strength Of 1800 N (Face) & 900 N (Edge), Minimum Compressive Strength 50 N/Mm2, Modulus Of Elasticity 850 N/Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant. Wpc To Be Laminated With Pvc Foil Of Minimum 14 Microns Thick Of Approved Design Pasted With Hot Melt Adhesive On Both Faces Of Shutter And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk S.S Screws, Complete All As Per Specified And As Directed. (Note: Stainless Steel Butt Hinges And Necessary S.S Screws Shall Be Paid Separately) 38 M&L For Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door/ Window/ Ceosetory Windows & Other Frames/ Chowkhat Of Size 50 X 47 Mm Comprising Of Virgin Pvc Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Fabricated With Meter Joints After Applying Pvc Solvent Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/ Cum, Screw Withdrawal Strength Of 2200 N (Face) & 1100 N (Edge), Minimum Compressive Strength Of 58 N/Mm2, Modules Of Elasticity 900 N/Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/ Moisture Proof And Fire Retardant And Fixed In Position With Ms Hold Fast/ Lugs/Ss Dash Fasteners Of Required Dia And Length, Complete All As Specified And As Directed.Note: (A) M.S. Hold Fast/ Lugs Or Ss Dash Fasteners Shall Be Paid For Separately.(B) For Wpc Solid Door/Window Frames, Minus 5Mm Tolerance In Dimension I.E. Depth And Width Of Profile Shall Be Acceptable. Variation In Profile Dimensions On Plus Side Shall Be Acceptable But No Extra Payment On This Account Shall Be Made. 39 S&F Of 150 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section, Complete All As Per Specified And As Directed. 40 S&F Of 100 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section, Complete All As Per Specified And As Directed. 41 S&F Of 300 Mm Long Mild Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed Complete All As Per Specified And As Directed. 42 S&F Of 75 Mm Butt Hinges, Medium Weight, Stainless Steel And Fixed Complete All As Per Specified And As Directed. 43 S&F Of 125 Mm Extruded Aluminium Alloy Handles, Fabricated Type, Anodised Complete All As Per Specified And As Directed. 44 S&F Of Brass Chromium Plated Tubular Towel Rail, 20Mm Dia, D Type, 60Cm Long Between Flanges, Complete All As Per Specified And As Directed. 45 S&F Of Floor Door Stopper 150Mm Long Of Aluminium Alloy Body And Tongue, Anodised With Hard Drawn Steel Spring, Fixed In Floor Complete All As Per Specified And As Directed. 46 S&F Of Ms 250Mm, Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate, Complete All As Specified And As Directed. 47 S & F Stainless Steel Wire Cloth, 0.36 Mm Dia Of Wire And Average Width Of Aperture 1.40 Mm And Fixed With Tinned Stacks, Or Galvanized Wire Staples Complete All As Per Specified And As Directed. 48 M&L For Framed Work Such As Grills, Gratings, Etc.. With Ends Of Bars Shouldered And/Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Conforming To Fe.290.Gde-E-165 Complete All As Per Specified And As Directed. 49 M&L For Mild Steel Tmt Bars 10 Mm Dia. And Over Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia., Or Securing With Clips, Complete All As Per Specified And As Directed. 50 M&L For Mild Steel Tmt Bars 6 To 8 Mm Dia. Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia., Or Securing With Clips, Complete All As Per Specified And As Directed. 51 M&L For Mild Steel Tmt Bars 5 Mm To 10 Mm Dia., Cut To Length, Bent To Shape Required, In Stirrups, Spacers And Binders And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia., Or Securing With Clips Quality Conforming To Fe-410-S Or Fe-410-O, Complete All As Specified And As Directed. 52 S&F Of Mild Steel Flat Iron As In Bands, Straps, Supports Or Stays For Rainwater, Ventilating Pipes, Including Bolts,If Required Hooks (Stay), Heavy, For Large Gates; Hook And Pintle Hinges Large Hasps And Staples; Chains; Hand Made Sliding Bolts; Clamps; Hold Fasts; Wall Ties; Hooks For Hanging Fans; Plain Angle Cleats For Securing Purlins To Wood Trusses Or Rafters; Knee Piece Inserts; Two Way And Three Way Straps, Plate Washers And Similar Small Articles Conforming To Fe-290 Gde-E-165 Complete All As Specified And Directed. 53 S&F Of Powder Coated Aluminium Window Sliding Type Three Track (2 Glazed & One Gauzed Shutter ) Aluminium Sections Weighing Not Less Than 1.25Kg/M For Frame And 0.55 Kg/M For Shutter Including Necessary Jointing Cleats, Glazing Cleats, Rubber Packing , Screws, Handle, Locking Arrangement And 5.5Mm Thick Plain/Tinted Glass And Aluminium Mosquito Proof Gauge Including Taking Down Of Old Existing Steel Window And Making Good Disturbed Surfaces Of Wall Complete All As Per Specified And As Directed. 54 S&F Of Pressed Steel Frames Of Size 105X60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete All As Per Specified And As Directed. 55 S&F Of Pressed Steel Frames Of Size 125X60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete All As Per Specified And As Directed. 56 S&F Aluminium Anodized Louvered Ventilators With Glass Louvers , Without Sash Bars, Of Aluminium Sections Weighing 0.55Kg/M Including Necessary Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws, Anodised Aluminium Fittings And With Suitable Locking Arrangements Including Taking Down Of Old Existing Steel Window And Making Good Disturbed Surface Of Wall, Complete All As Per Specified And As Directed . 57 M&L For 75 Mm Thick Pcc (1:3:6) Type C-2 (Using 40 Mm Graded Crushed Stone Aggregate) As In Plinth Protection/ Footpath/ Steps Finished Cement Concrete Surface Even & Fair Etc Including Necessary Form Work Complete All As Specified And As Directed. 58 M&L For 75 Mm Thick Pcc Type C-2, 1:3:6 (Using 40 Mm Graded Crushed Aggregate) As In Flooring, Plinth Protection/Footpath Finishing Cement Concrete Surface Even And Smooth Without Using Extra Cement, Complete All As Specified And As Directed. 59 M&L For 75Mm Thick Pcc 1:4:8, Type D2 (Using 40Mm Graded Crushed Agg) As In Sub Base Of Floor Finished Rough To Receive Floor Topping Including 150 Micron Polythelene Sheet With Laping Over Sand Filling, Complete All As Per Specified And As Directed. 60 M&L For 25 Mm Thick Pcc (1:2:4) Type B-0 (12.50 Mm Graded Stone Crushed Aggregate) , As In Floor, Finished Rough To Receive Floor Finish, Complete All As Specified And As Directed. 61 M&L For Coloured Glazed Ceramic Tiles Not Less Than 450X350X 7 Mm/Thick, On Vertical Surfaces Such As Skirting, Dados And Risers To Steps Etc Conforming To Is - 13712 Grade Ib-Iii, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over 10 Mm Thick Screed Bed Or Bedding Layers In Cm 1:4 Complete All As Per Specified And As Directed . 62 S&F Of Coloured Non-Skid Ceramic Tiles Not Less Than 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.36 Sqm, In Floors Etc, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match With The Shades Of Tiles Over 15 Mm Thick Screed Bed Or Bedding Layers In Cm 1:6 Complete All As Per Specified And As Directed. 63 S&F Of Coloured Non-Skid Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.36 Sqm, Skirting Etc, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, Complete All As Per Specified And As Directed. 64 S&F Of Coloured Non-Skid Ceramic Tiles 7 To 8 Mm Thick (Square/Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match With The Shades Of Tiles Over 15 Mm Thick Screed Bed Or Bedding Layers In Cm 1:6 Complete All As Per Specified And As Directed. 65 M&L For Machine Cut Kota Stone Slab Flooring Not Less Than 20-25Mm Thick, Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing, Complete All As Specified And As Directed. 66 M&L For Machine Cut Kota Stone Slab Not Less Than 20-25 Mm Thick In Riser Of Steps, Skirting, Dado And Pillar Laid Over Cement Screed And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing, Complete All As Specified And As Directed . 67 M&L For Cutting, Grinding, Rubbing And Polishing For Old Kota Stone Flooring With Gap Filling With Grey Cement Slurry, Mixed With Pigment To Match The Shade Of Granite Stone Complete All As Specified And As Directed. 68 M & L For 18 To 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window Cills, Cooking Platforms,Corner Shelf,Flat Shelf And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite And Including 15 Mm Thick Cement Plaster (1:4) Including Rounding The Exposed Surfaces Of Granite Complete All As Specified And As Direcetd. 69 M&L For 10Mm Thick Rendering In Cement Mortar (1:4) On Fair Faces Of Brick Work Or Concrete Surfaces As Backing Coat Of Dado/Skirting Etc., Complete All As Specified And As Directed. 70 M&L For 15 Mm Thick Rendering In Cement Mortar (1:6) On Fair Faces Of Brick Work Or Concrete Surfaces And Finished The Surface Even & Smooth Without Using Extra Cement, Complete All As Specified And As Directed. 71 M&L For 15Mm (10+05) Mm Thick Plaster Of Cement Mortar (1:4) Rendering On Fair Faces Of Brick Work In Two Layers (10Mm & 05) Mixed With Water Proofing Compound In Top Layer 200 Ml Per Beg Of Cement Or As Per ManufacturerS Instructions Finishing The Surface Fair And Even Without Using Extra Cement Complete All As Specified And As Directed.(Note: Wpc Shall Be Measured And Paid Separately As Supply Only Under Relevant Item.) 72 M&L For 10Mm Thick Screed Bed Or Bedding Layer In Cement Mortar (1:4) Mixed With Wpc In Order To Maintain Proper Slope Over Existing Roof Surfaces For Laying Water Proofing Treatment Over Roof, Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And As Directed.(Note: Water Proofing Compound Shall Be Measured And Paid Separately Under Relevant Item Of This Schedule). 73 M&L For 5Mm Thick Rendering Plastering On Fair Faces Of Brick Work Or Concrete Surface As In Ceiling In Cement Mortar (1:3) Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And As Directed. 74 M&L For Preparing Newly Plastered Surfaces Of Ceiling And Applying Three Coats Of White Wash Complete All As Specified And As Directed. 75 M&L For Preparation Of Newly Plastered Surfaces Of Walls And Applying Two Coats Of Oil Bound Distemper, White Or Tinted Over A Coat Of Primer After Applying Not Less Than 1Mm Thick Of Cement Based Wall Putty To Wall Surface, Complete All As Specified And As Directed. 76 Material & Labour For Preparing Of New Plastered Surface Of Wall And Applying Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : New Work (Two Or More Coat Applied @ 1.67 Litre/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm), Complete All As Specified And As Directed. 77 M&L For Preparation Of New Or Previously Untreated Wood Or Wood Based Surfaces Of Any Description, Exceeding 10 Cm Width Or Girth, Not Otherwise Described And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer, Complete All As Specified And As Directed. 78 M&L For Preparation Of New Or Previously Untreated Steel Or Iron Surface Of Any Description And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide, Primer Over 10Cm Width Or Girth Complete All As Specified And As Directed. 79 Supply And Fixing Of Gi Tube 15 Mm Bore Medium Grade With Fittings And Fixed To Walls And Ceilings Or Laid In Floors Complete All As Specified And As Directed. 80 Supply And Fixing Of Gi Tube 20 Mm Bore Medium Grade With Fittings And Fixed To Walls And Ceilings Or Laid In Floors Complete All As Specified And As Directed. 81 Supply And Fixing Of Gi Tube 25 Mm Bore Medium Grade With Fittings And Fixed To Walls And Ceilings Or Laid In Floors Complete All As Specified And As Directed. 82 S&F Of Gi Tubing 40 Mm Bore Light Grade Isi Marked For Protection Of Cable Including Necessary Joints With All Fitting, Laid In Trenches, Complete All As Specified And As Directed. 83 S&F Of Rotational Moulded Pvc Water Storage Tank Not Less Than 1000 Litres Capacity Conforming To Is-12701(1989) Cylindrical Vertical Type Multi-Layered (Not Less Than 3 Layers) With Closed Top Including Inlet, Outlet And Wash Out Holes Of Approved Make Hoisted And Fixed In Position All As Specified In Ssr Part-I, 2009 Etc., Complete All As Specified And As Directed. 84 M&L Cutting Existing Gi Tubing 40 Mm Bore Gi Pipe For Alterations Or Additions Of 20Mm Dia For Insertion Of Reducer Tee, Complete All As Per Specified And As Directed. 85 S&F Of Cp Bib Taps Cast Copper Alloy With Crutch Or Butterfly Handle For 15Mm Bore Pipe, Screwed For Iron Pipes Or For Brass Ferrule, Complete All As Per Specified And As Directed. 86 S&F In Repairs Bib Taps Fancy Type Cast Copper Alloy, For 15Mm Bore Pipe, Screwed For Iron Pipes Or For Brass Ferrule, Complete All As Per Specified And As Directed. 87 Supply And Fixing Of Stop Valves, Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed Of 15Mm Bore Complete All As Specified And As Directed. 88 Supply And Fixing Of Stop Valves, Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Chromium Plated Or For Unions And Fixed Of 15Mm Bore Complete All As Specified And As Directed. 89 S&F Of Stop Valves Fancy Type Cast Copper Alloy, Chromium Plated With Long Shank And Cup (Concealed Type) For 15Mm Bore Pipe, Screwed Both Ends Including Necessary Fittings Such As Sockets For Pipe Or For Union, Complete All As Per Specified And As Directed By Engineer-In-Charge. 90 S&F Of 20 Mm Gun-Metal, Globe Or Gate Valves, With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed, Complete All As Per Specified And As Directed. 91 S&F Of 25 Mm Gun-Metal, Globe Or Gate Valves, With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed, Complete All As Per Specified And As Directed. 92 S&F Of 20 Mm Ball Brass Valves, High Pressure, With Polythene Float And Flynet Complete, Screwed For Iron Pipe Or Brass Ferrule And Fixed Complete All As Per Specified And As Directed. 93 S&F Of Pvc (Swr) Floor Trap, Plain With Grating 75Mm Including Jointing To Waste Pipe Fixed In Cement Concrete Type B-1 (1:2:4) And Including Water Leak Proof Treatment, Complete All As Specified And As Directed. 94 S&F Of Shelf Of Ptmt Fixed With And Including Chromium Plated Brass Screws And Wooden/Plastic Cleats (Minimum Weight 300Gms), Complete All As Specified And As Directed. 95 S&F Of Pvc Connection 15Mm Dia With Ptmt Nuts Of Length 450Mm, Complete All As Per Specified And As Directed. 96 S&F Of 75 Mm Dia Pvc (Swr) Pipes Single Socketed, In Any Length, With Rubber Ring Joints Fixed To Wall And Floors, Complete All As Per Specified And As Directed. 97 S&F Of Pvc (Swr) 75 Mm Bore Bends Complete All As Per Specified And As Directed. 98 S&F 110 Mm Dia Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints Fixed To Walls, Complete All As Per Specified And As Directed. 99 S&F Of 110 Mm Dia Bore Pvc (Swr) Bends, Complete All As Specified And As Directed. 100 S&F Of 110Mm Dia Pvc Swr Vent Cowl Complete All As Per Specified And As Directed. 101 M&L For Salt-Glazed Stoneware Gully Traps, Square Or Round Mouthed, Type `P 150X100Mm Complete All As Directed. 102 S&F Of 600X450Mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6 Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Complete All As Per Specified And As Directed. 103 S&F Of Vitreous China Wash Down Water Closet Pan (Pedestal Pattern), White, Including Connection To Drain (Or Outgoing Pipe) And To Flushing Pipe, Anti Syphonage Pipe, Etc. And Plastic Water Closet Seat Cover, Black, Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device, Complete All As Per Specified And As Directed. 104 S&F Of Pvc Valveless, Syphonic Action Type 10 Ltr Capacity Low Level Flushing Cistern, White, With Inlet, Ball Valve, Float And Handle Including Brackets And 32 Mm Bore Pvc Flush Pipe, Complete All As Per Specified And As Directed. 105 S&F Of Vitreous China Wash Hand Basin White, Flat Back, Size 550 X 400 Mm Size (Flat Back Or Angle Back Type) Excuding Taps,Waste Chain, Plug And Procelain Stopper But Including Cutting For And Pinning Ends Of Brackets And Including, Waste Pipe, Cp Waste Coupling Etc., Complete All As Per Specified And As Directed. 106 S&F Of Brass Chromium Plated Shower Rose 125Mm Size With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union, Complete All As Per Specified And As Directed. 107 M&L For 10Mm Thick Screed Bed Or Bedding Layer In Cement Mortar (1:4) Mixed With Wpc In Order To Maintain Proper Slope Over Existing Roof Surfaces For Laying Water Proofing Treatment Over Roof, Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And As Directed.(Note: Water Proofing Compound Shall Be Measured And Paid Separately Under Relevant Item Of This Schedule). 108 M & L Water Proofing Treatment To Rcc Roof Slab Including Parapet Comprising Of The Following Course Of Treatement / Specified From Bottom To Top (A) Applying Bituminous Primer @ 0.40 Ltr Per Sqm Over Plastered Surfaces Of Roof Including Parpet Surfaces. Bituminious Primer Shall Be Tar Mastic Manufactured By M/S Stp Ltd Or Emw Flate Manufactured By M/S Texsa India Ltd. (B) Over The Priming Coat Laying One Layer App Based Polymeric Membrance Of Approved Manufacturer, 3 Mm Thick Of Weight Not Less Than 3.60 Kgs/Sqm Reinforced With Non Woven Polyester Fabric Weight Not Less Than 160 Gms Per Sqm. Polymeric Members Shall Be Taken To A Height Of 60Cm (Minimum) And Then Inserted Inside The Groove Of Parapet Wall And Shall Be Finished By A Membrance Flashing. (C) Application Of Two Coat Of Bituminous Aluminium Paint Over The Polymeric Membrane After Necessary Preparation And Cleaning, Complete All As Specified And As Directed.Note:- (I) Laying App Based Polymeric Membrance Shall Be Done By Torch On Method Or As Per Manufacturers Instructions. (Ii) A Minimum Overlap Of 100Mm Shall Be Made At The End And 75Mm Shall Be Made At The Sides Of The Polymeric Membrance Respectively And Sealed All Ovelaps And Joints As Per Manufacturers Instructions.(Iii) App Based Polymeric Membrane Shall Be \Moply Fp 3Mm\ Manufactured By M/S Texsa India Ltd.(Iv) Applying Two Coats Of Alluminium Paint Over App Membrane. 109 S&F Of 28Mm Fancy Type Drapery Rod Of Mild Steel Duly Powder Coated Wood Finished With Fixing Brackets And Fancy Type, Stopers Etc Completed All As Specified And Directed. 110 S&F Of Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position, Complete All As Per Specified And As Directed By Engineer-In-Charge. 111 S&F Of Pillar Taps 15Mm Fancy Type, Bore Cast Copper Alloy With Capstan Heads Chromium Plated Screwed Down High Pressure With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly Nuts Screwed For Iron Pipe, Complete All As Per Specified And As Directed. 112 S&F Of Two Way Bib Cock With Wall Flange Chromium Plated With Crutch Or Butterfly Handle Screwed Down Screwed For Iron Pipe 15 Mm Bore And Fixed, Complete All As Per Specified And As Directed By Engineer-In-Charge. 113 S & F Of Stainless Steel Soap Dish, Not Less Than Size 160X 160X90Mm, Complete All As Per Specified And As Directed. 114 S&F Of Towel Ring Of Chromium Plated Fixed With And Including Chromium Plated Brass Screws And Wooden/Plastic Cleats (Minimum Weight 90Gms), Complete All As Per Specified And As Directed. 115 Supply And Fixing Of Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Or Semi-Corrugated Steel Sheet 0.50 Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws Or J Hooks, Complete All As Specified And As Directed. 116 S&F Of Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc. Confirming To Fe 410-W (Gde E- 250) Quality-A, Complete All As Per Specified And As Directed. 117 M&L For Concrete Bed To 150 Mm Dia Drain Pipes Including Packing Under & Haunching Against The Sides Of Pipes With Concrete After They Are Laid & Tested In Pcc (1:3:6) Type C2 (Using 40 Mm Graded Crushed Stone Aggregate) Complete All As Per Specified And As Directed. 118 M&L For 150 Mm Dia (Internal) Salt Glazed Stone Ware Drain Pipes (Grade A) Isi Marked As In Sewage Lines Laid In Trenches And Jointed Complete All As Specified And As Directed. 119 M&L For Cutting Into Existing Manholes For Connecting New Drains, Making Good To Pipe And Rendering, Cutting Out Existing Benching For And Forming Branch Channel (1/2 Round Or 3/4 Section) In Cement Concrete 1:2:4 Type B-1 Smooth Finished, And Reforming Benching As Required For Pipe Of Internal Dia. 150Mm, Complete All As Specified And As Directed. 120 Providing And Laying Of 60Mm Thick Factory Made Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved Colour, Design & Pattern As In Footparth, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc., Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over And Including 50Mm Thick Compacted Bed Of Fine Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand, Complete All As Per Specified And As Directed. 121 M&L For Paver Tiles 10Mm Thick, Set Jointed And Pointed In Neat Cement Slurry Over In Pavement/ Footpath/ Floors Over Icluding 15Mm Thick Screed Be Or Bedding Layer In Cement Mortar 1:6, Complete All As Per Specified And As Directed. 122 Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5 Mm), Including Making Drainage Opening Wherever Required, Complete All As Per Specified And As Directed. 123 Sch A Part-Ii (E/M Work)M&L For Point Wiring Complete With 1.5 Sqmm Multistranded Copper Conductor Single Core Pvc Insulated Unsheathed Fr-Ls Cable 1100 Volts Grade (Isi Marked) With Proper Colour Coding Drawn Through And Including Non-Metallic Rigid Pvc Medium Grade Conduit Not Less That 20Mm Dia And Conduit Accessories (Isi Marked) Concealed In Wall/Fixed To Roof, Ceiling Etc Including Provision Of 1.5 Sqmm Pvc Insulated Multistranded Unsheathed Copper Conductor Cable Fr-Ls (Isi Marked) As Earth Continuity Conductor Connected To Common Earth Dolly, Modular Type Sunken Terminal Box Made Out Of Gi Sheet Steel Of Appropriate Size For Boxes Duly Painted With Aluminium Inside And Anticorrosive Paint Outside, Concealed In Walls, With Modular Frame For Housing Modular Type Switches, Socket Outlets, Fan Regulators Etc Duly Earthed Including Cutting Chases Of Existing Wall For Conduits And Sinking For Boxes And Making Good To The Disturbed Surface Of Wall/Floor And Matching With Existing Specifications. Connections Of Cable With Mcbs Or Bus Bar Shall Be Done Through Proper Size Copper/Brass Thimbles. Where Concealing Of Conduit Is Not Feasible I.E. On Surface Of Roof Etc, Conduit Shall Be Fixed On Surface With Necessary Saddles At No Extra Cost Complete All As Specified And As Directed For One Light Point Controlled By One Way Switch, Complete All As Per Specified And As Directed . 124 All As Per Item No.123.00 Above But One Celling Fan/Exhaust Fan Point Controlled By One Switch 5/6 Amps Complete All As Specified And Directed. 125 All As Per Item No.123.00 Above But One Socket Out Let One 5/6 Amps On Same Board Complete All As Specified And Directed. 126 All As Per Item No.123.00 Above But One Socket Out Let One 5/6 Amps On Independent Board Complete All As Specified And Directed. 127 All As Per Serial Item No. 123.00 Above But For One Bell Point Controlled By One Way Switch. 128 All As Per Item No.123.00 Here-In-Before But Point Wiring With 2.5Sqmm Pvc Insulated Multistranded Flexible Unsheathed Copper Conductor Fr-Lsh And Earth Conductor Of Size 2.50 Sqmm Flexible Copper Conductor Fr-Lsh , 15/16 Amps Socket Outlet On Independent Board Complete All As Specified And Directed. 129 S&F Of Modular Switch 1Way 6 A ,1 Module Complete All As Specified And Directed. 130 S&F Of Call Bell, Ding Dong Ac 230 Volts, Single Pole, Complete All As Specified And As Directed . 131 S&F Of Modular Bell Push Flush Type 5 Amp, 1 Module, 230 Volt, Isi Marked, Complete All As Specified And As Directed . 132 S&F Socket, 6A - 2/3 Pin Combined 2 Module,White Ivory Finish Modular Type Complete All As Specified And Directed. 133 S&F Socket, Socket 6A/16A - 2/3 Pin Combined 2 Module,White Ivory Finish Modular Type Complete All As Specified And Directed. 134 S&F Of Modular Switch 16 Amps, Single Pole, 1 Way, 1 Module, 240V, Ac, Complete All As Specified And Directed. 135 S&F Of Modular White Cover Plate With Frame 3 Module Inclusive Of Inner & Outer Plate, Complete All As Specified And As Directed. 136 S&F Of Modular White Cover Plate With Frame 6 Module Inclusive Of Inner & Outer Plate, Complete All As Specified And As Directed. 137 S&F Of Modular Blank Plate With Frame 1 Module, Complete All As Specified And As Directed . 138 S&F Of Modular Fan Regulator, 120 Watts, 2 Module, 230Volts, Ac 50 Hz, Complete All As Specified And Directed. 139 S&F Of Ceiling Rose , Three Terminal, Pvc/Polycarbonate Body, Isi Marked Complete All As Specified And Directed. 140 S&F Of Angle Lamp Holder, Insulated Body With Back Plate For Batten Fittings Complete All As Specified And Directed. 141 S&F Led White Glass Lamp Not Less Than 1X14 Watt 230V Base-22, Complete All As Specified And As Directed. 142 Supply And Fixing Of Led Lights Fitting Not Less Than 1X 18W, 230V, White Powder Coated Slim Box Type Batten Made Of Formed Crca With Snap On Installer Led Lighting Fixture With And Including 1X 18/20 Watt T8 Double Side Connection Retrofit Led Tube G13 Lamp Holder, Connector Block, Complete All Accessories Internally Pre-Wired And Including Connecting Up With Three Core Twisted Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose, Complete All As Specified And As Directed. 143 S&F Ip 20, Class I, Led Mirror Light Fitting Not Less Than 1 X 10 W, (Or Nearest Next Higher Wattage) 5700 K, Wall /Surface Mounted With Aluminium Housing 2 Feet Long, Integrated Type, With High Efficiency Pmma Diffuser, Integrated High Efficiency Electronic Driver & Surge Suppressor Of 2 Kv Or More, Luminaire Efficacy > 95 Lumens/Watt, Power Factor >/ 0.90, Operating Range – 140 To 270 V, 50 Hz Fixed With 02 Nos Of Pvc Round/Square Blocks, Screws Etc Complete Including 01 No 10 W Led Lamp With All Accessories Internally Prewired And Including Connecting Up With And Including Twin Core Twisted Flexible Copper Conductor Cable Of Suitable Size Complete All As Specified. 144 S & F Of Led Light Fitting Not Less Than 1X10Wbulkhead Luminaires Including Led Light Driver Holder Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size. 145 S&F Mcb Db Conforming Ip 43 -Ik 09 With Acrylic Door 8 Way Double Door Complete With All Connection -Phase, Nutral And Earthing Bar And Making Good The Disturbed Surfaces Complete All As Specified And Directed. 146 Supply And Fixing 415V 10Ka B Curve Miniature Circuit Breaker (Mcb) Of Tpn/Fp 63Amp And Current Carrying Capacity In The Db Complete With Connection Testing And Commissioning., Complete All As Specified And As Directed. 147 S&F Of Mcb, Sp, 6 Amps To 32 Amps , C Series, 240 Volt, 10Ka, 50 Hz, Complete All As Specified And Directed 148 S&F Of Mcb, Spn, 35 Amps To 40 Amps , C Series, 240 Volt, 10Ka, 50 Hz, Complete All As Specified And Directed 149 S&F Of Ceiling Fan (Bldc) Complete With Fan Blades Down Rod With Electric Regulator And Accessories, 230V, 1200Mm Sweep, Minimum Air Delivery 210 Cfm With Service Value 6.00 Bee Five Star Rated With Brushless Directed Current Motor, Complete All As Specified And Directed. 150 S&F Of Exhaust Fan Made Of Sturdy Engineering Plastic Complete With Louvers Shutter, Voltage 230V, 50 Hz, Rpm 1200, Copper Winding Of Sweep 250Mm, With All Accessories As Bird Guard/ Louvers Shutter Etc Including Making Connection With Three Core Flexible Multistranded Copper Conductor Of Size 0.75 Sqmm Run Through Flexible Pipe, Including Cutting Holes And Making Good The Disturbed Surfaces Of Wall In Cement Mortar (1:4) And Finishing The Surface As Existing Color Scheme Complete All As Specified And As Directed. 151 S&F Of Storage Water Heater 25 Ltr Capacity, Bee 5 Star, Vertical Mounting Complete With All Inlet And Outlet Water Connection As Required With All Accessories Like Thermostate, Non Return Valve, Connection Pipe, Stop Valve, Bib Cock, Medium Grade Tubes Including Cutting Existing Steel Tube As Required Complete All As Specified And Directed.(Note- Accessories Like Thermostate, Non Return Valve, Connection Pipe, Stop Valve, Bib Cock, Medium Grade Tubes Etc For Execution Of The Work Is Deemed To Be Included In Unit Rate Quoted). 152 S&F Security Light Fittings Not Less Than 1X 25 Watt Led New Generation Energy Saving And Environmental Friendly Long Life Led Security Light Made Up Of Pressure Die Cast Aluminium Housing With High Power Led As Lighting Source And Lens Embedded Pc Cover Having Top Openning Seperate Driver Compartment With Ip66 Protection And Impact Resistance Of Ik07 And Including Connection Up With New Three Core Twisted Flexible Copper Conductor Cable From Ceiling Rose To Fitting And Street Light Bracket Made Out Of Gi Tubing 32 Mm Bore Medium Grade 1.20 Mtr Long Bend To Required Shape As In Bracket For Street Light Fittings Fixed With Two No Of Ms Flat Iron 25Mm X 5Mm Size And 30Cm Long Clamp Of Required Shape With Bolts Nuts And Washers Complete All As Specified And As Directed. 153 Supply And Laying And Testing Cable Xlpe Insulated,Screened Pvc Galvanized Steel Strip Or Wire Aemoured Electric Power Cables (Heavy Duty) With Aluminium Stranded Conductor 1100 Volts Grade, Cross-Sectional Area 16 Sqmm, 4 Core All Fixing And Connecting Accessories Such As Cable Lugs And Glands, Nuts, Bolts, Complete All As Specified And Directed.(Note: Excavation/Earth Work,Gi Pipe, Sand Cushioning, Cable Cover/Brick Shall Be Measured And Paid Separately If Required) 154 Supply, Laying Xlpe Insulated Pvc Inner Sheathed, Armoured With Galvanized Steel Strip Or Wire Heavy Duty Underground Cable With Stranded Aluminium Conductor 1100 Volt Grade Of Size 25 Sqmm 4 Core Laid In Trenches / Duct Passing Through Pipe / Duct Or Fixed On Pole And Connecting And Testing Complete All As Specified And As Directed.(Note: Excavation/Earth Work, Sand Cushioning, Cable Cover/Brick Shall Be Measured And Paid Separately If Required) 155 Supply And Fix Of Sheet Metal Enclosure Powder Painted For Mcb/ Mccb/ Isolator/ Rccb/ Rcbo Tp & N 4 Way Double Door Db, 415 Volts, 200 Amp With Magnetic Locking System Complete All As Specified And As Directed. 156 M & L For Horizontal Boring Across The Existing Road Without Disturbing The Road Surface For Inserting Gi Pipe, Complete All As Specified And Directed.Note :- Gi Pipe Shall Be Measured And Paid Respective 157 Supply, Installing, Testing And Commissioning Outdoor Type Lt Feeder Pillar Box Of Not Less Than 800Mm X 600Mm X 450Mm Size, Pedestal Mounted, Cpri Approved Factory Made Totally Enclosed, Dust And Vermin Proof, Double Leaf Shutter In Front And Single Leaf Shutter In Rear Side Made Of 3.15 Mm Thick Crca Sheet, Framing With 40 X 40 X 6 Mm Thick Ms Angle Iron And Legs Of Size 0.5M Long Duly Fabricated And Having Proper Locking Arrangement In Both Front And Rear Door With 4 Side Slanting Roof Duly Projected And Painted To Both Internal And External Surfaces With Powder Coating Paint In Heat Process Of Sheet And Suitable For 450 Volts, 3 Phase 4 Wire System. The Degree Of Outer Shell Of The Panel Shall Be Ip-65.A Detachable Pre Drilled Gland Plate Should Be Used At Bottom. All Control Shall Be With 2.5Sqmm Multi Stranded Copper Conductor And Shall Be Proper Bunched, Tied, Furruled Fo Proper Identification And Print With Adequate Size Including Following Accessories And Mounted On Pcc Plat Form Made Out Of Pcc 1:3:6, Of Size 0.8M X 0.6M X 1.05M Depth (45Cm Below Ground Level And 60 Cm Above Ground Level) As In Foundation In Cement Mortar 1:6 And Plastering The Same In Cement Mortar 1:6 Finished Even And Smooth Without Using Extra Cementincluding Necessary Excavation, Earthwork And Including Connecting All Incoming And Outgoing Lt Ug Cables After Dawing/Digging Out Cable From Loops In Trenches, Complete All As Specified And As Directed Along With And Including Comprising Of The Following Accessoris:- 158 Contd...Item Serial No 157.00Note:(I) Cost Of Earthwork And Pcc Are Deemed To Inclusive In This Item. (Ii) The Schematic Diagram Of Lt Pannels Shall Be Approved By Ge Before Procurement.Incoming:- 300 Amps Rated Copper Bus Bar Tpn Duly Insulated With Coloured Pvc Sleeve As Per Standard Colour Code And Rigidly Mounted On Bakelite/Dmc Insulator Bus Bar Support (Square/Round ) Insulators Of Suitable Size And Good Insulation Resistanceoutgoing:-150 Amps Rated Copper Bus Bar Tpn Duly Insulated With Coloured Pvc Sleeve As Per Standard Colour Code And Rigidly Mounted On Bakelite/Dmc Insulator Bus Bar Support (Square/Round ) Insulators Of Suitable Size And Good Insulation Resistance(A) Mccb 4 Pole 415 V 36 Ka Breaking Capacity Adjustable Thermal Magnetic Release With Ics=100%Icu, Neutral Adjustable 100% Of Rating 200Amps Including All Fixing Accessories With Both Ends Spreader Links.(Incoming -01 Nos)(B) Mccb 20A 4 Pole 415 V 25 Ka Breaking Capacity Adjustable Thermal Magnetic Release With Ics=100%Icu, Neutral Adjustable 100% Of Rating 200Amps Including All Fixing Accessories With Both Ends Spreader Links.(Outgoing -02 Nos)(C) Mcb Spn 40 Amps 240V 10 Ka - 3Nos(D) Digital Ampere Meter 0-300 Amps With Suitable Size Of Cts- 01 No(E) Voltmeter Digital Type 0-500 Volts In Built Selector- 01 No(F) Neon Indicator Lamps Set Ryb- 3 No(G) Necessary Excavation, Earthwork, Pcc 1:4:8 Type D2 And Pcc 1:3:6 Type C2 For Platform Complete As Required- 01 No.(H) Iron Danger Notice Plate Of 1.60Mm Thick Mild Steel Sheet Of Size 200Mm X 150Mm, White With Letter, Figures And Conventional Skull And Bones In Signal Red And Fixed With Nuts And Bolts On Door / Shutter Of Fpb For Lt-01 No. Note: (I) The Panel Design Should Meet The Requirement Of Housing All The Accessories. The Shall Prior Approve Of Design Of The Panel Before Placing Of Order.(Ii) Cpri Approval List Of Make Available In Tender Document. Bidders Are Invited To Take Consideration List Of Make Before Participation On Bidding.(Iii) The Contract Sum Shall Be Calculated By Deducting The Amount Shown In Credit Schedule Attached To This Tender (If Shcedule Of Credit Applicable), From Total Amount Of Schedule A/Boq. Please Enable Macros To View Boq Information