Tender For Provision Of Guard Room With Attached Bathroom And Allied Services Near Bldg No T-53 In Zone O At Mil Stn Agartala
Tender Value
9.51 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
18 days left
EMD
19020
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
agartala → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Guard Room With Attached Bathroom And Allied Services Near Bldg No T-53 In Zone O At Mil Stn Agartala
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Surface dressing n exc 15 cm deep in soft /loose soil complete all as specified and directed |
| 2 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete all as specified and directed |
| 3 | M & L hard core in broken bricks of gauge n. exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surfaces complete all as specified and directed. |
| 4 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete as specified and directed |
| 5 | M&L for M-20 Nominal mix , 20 mm aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 6 | Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat complete all as specified and directed. |
| 7 | M&L RCC M-20 Nominal mix using 20 mm graded aggregate in Columns, pillars, piers, posts and struts using suitable admixture in suitable proportion complete all as specified and directed. |
| 8 | M& L for Fair finished square plan Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and directed. |
| 9 | M&L RCC M-20 Nominal mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 10 | M&L for Rough finished Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. |
| 11 | M&L RCC M-20 Nominal mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 12 | M&L for fair finished Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) . |
| 13 | M&L RCC M-20 Nominal using 20 mm graded aggregate in Chajjas complete all as specified and as directed. |
| 14 | M&L for Fair finished Formwork to chullah hoods, chajjas, troughs & similar items including edges surfaces of concrete flat complete all as specified and directed. |
| 15 | M&L for 15mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for applying single component acrylic polymer modified, finished even and fair without using extra cement complete all as specified and directed. |
| 16 | M&L for clearing of plastered roof surface & applying one coat of cold bitumenous primer @ 1.20kg per sqm conforming to IS 3384-1986, and applying a layers of APP based polymeric membrane, 3mm thick (minimum) weight 3.00 Kg/sqm reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) shall be applied over Bitumenious primer (Application of polymerie memberane shall be by torch application, over laps shall be minimum 100mm on the transverse direction & 75 mm on the longtudinal direction) coved fillet in PCC (1:2:4) type BO of radius 75 mm shall be provided at the junction of roof & other vertical surfaces & applying one coat of aluminium paint over the APP nmodified membrane @ 0.11 kg/sqm all as speciied and directed. |
| 17 | M&L for TMT bars 10 mm dia and over, cut to lengh, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 18 | All as per item ser No. 17 but as in stirrups, spacers and binder, 8mm dia TMT bar |
| 19 | M&L for Brickwork with old size subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 20 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil. |
| 21 | Removing excavated soil exc 250m but n exc. 500m & depositing where directed at a level n exc. 1.5 m above the starting point |
| 22 | M&L for Sand filling under floors or in foundation including watering & consolidation complete all as specified and directed. |
| 23 | M & L 75 mm thick PCC type D-2 1:4:8 ( 40mm graded stone aggt) in sub base of floor. |
| 24 | M&L for providing 40 mm thick cement concrete type B-1, 1:2:4 using (20 mm graded brick aggregate) as in floors finished rough without using extra cement complete all as specified and directed. |
| 25 | Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm in floors/skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor tiles complete all as specified and directed. |
| 26 | Material & Labour glazed ceramic coloured tiles 350 x 250 x 7 /450 x300x7 mm thick on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match 10mm thick bedding layer of mortar to wall in CM (1:4) complete all as specified and directed. |
| 27 | M&L 15mm thick rendering in cm (1:4) on concrete surfaces with integral water proofing compound @ 200ml/bag of cement, (Water proofing compound measured & paid separately) finished even and fair complete all as specified and as directed. |
| 28 | M&L 10 mm thick rendering in cm (1:6) on other than fair faces of brick work or concrete surfaces without using extra cement complete all as specified and as directed. |
| 29 | M & L for 5 mm thick rendering in CM (1:3) on fair face of concrete surfaces as in ceiling,chajjas etc finished even and smooth without using extra cement complete all as specified and as directed. |
| 30 | Supply only liquid water proofing compound |
| 31 | M&L for applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface complete all as specified and directed. |
| 32 | M & L for preparation of new plastered surfaces applying two coats of oil bound distemer on new plastered surfaces complete all as specified and directed. |
| 33 | M&L for preparation of new plastered ceiling ,chajjas surfaces and applying three coats of white wash over it complete all as specified and directed. |
| 34 | Material and labour 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection finished fair and even w/o using extra cement and making groove of 10mm width at every 3m intervals and at diagonals and filling the joints with bitumen mastic( a mix of bitumen and sand in 1:1 by weight) complete all as specified and directed. |
| 35 | S&F Rolled Steel Sections as in tubular trusses etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 and painted one shop coat of zinc chromate primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and directed. |
| 36 | S&F MS steel Hollow section Square/rectangular as in purlins, rail etc etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 and painted one shop coat of zinc chromate primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and directed. |
| 37 | S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed. |
| 38 | S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw complete all as specified and directed. |
| 39 | S & F 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and directed. |
| 40 | M & L for PCC type C-1 (1:3:6) using 20mm graded stone aggreagate as in bed block for fixing of hold fast filling concrete in door frame incl necessary form work complete all as specified and directed. |
| 41 | S & F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 42 | M&L for two coats of synthetic enamel paint over one coat of pink primer on wooden surfaces of any description, not otherwise described, over 10cm width or girth incl preparation of new surfaces complete as specified and directed. |
| 43 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. |
| 44 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grained printed PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 45 | S&F factory made solid PVC Moulded door shutter 28 to 30mm thick with particle board coare, 28 to 30mm thick (stiles) 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face as per specification and drawing complete all as specified and directed. |
| 46 | S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed. |
| 47 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 48 | S&F Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized of100mm size type B-21. |
| 49 | S&F factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed. |
| 50 | S&F factory made Z section steel ventilator with top hung shutter incl hinges, steel peg stay, with glazing bars including a shop coat Red Oxide priming including taking out old one , complete all as specified and directed. |
| 51 | S&F factory made Z section steel ventilator with top hung shutter incl hinges, steel peg stay, without glazing bars including a shop coat Red Oxide priming including taking out old one , complete all as specified and directed. |
| 52 | S&F 3 mm thick plain glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane etc complete all as specified and directed. |
| 53 | S&F figured glass, pin head type 4 mm thick in squares n.exc 0.50 Sqm in each pane etc complete all as specified and directed. |
| 54 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed. |
| 55 | M&L mild steel work such as grills, guard bars etc and similar work conforming to Fe290 GDE E-165 complete all as specified and directed. |
| 56 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed. |
| 57 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed. |
| 58 | S & F Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm as specified and suspended with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats complete all as specified and directed. |
| 59 | S&F for Non asbestos fibre cement building board (E- Board) 4 mm thick for fixed to Aluminium frame work with screws as in ceiling complete as specified and as directed. |
| 60 | M & L for preparation of new unplastered surfaces over ceiling and applying two coats of oil bound distemer over a coat of primer on board complete all as specified and directed. |
| 61 | Supply & Fix vitreous china squatting pan \\" Orissa Pattern\\" size 580 x 440 mm white with integral foot rest including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 62 | S&F 10 Ltr capacity PVC valveless, syphonic action type Flushing Cistern, low level white with inlet ball valve float & handle including brackets & connection to pipes complete all as specified and directed. |
| 63 | S&F vitreous china wash basin, white, flat back, size 450x300m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed. |
| 64 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 65 | S&F pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as directed. |
| 66 | S&F for 600X450mm long bevelled edge mirror of selected quality glass mounted on 6mm thick AC building borad or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers with sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed. |
| 67 | S&F 15 mm stop valves (angular type), cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed . |
| 68 | S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs complete all as specified and as directed. |
| 69 | S&F 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and as directed. |
| 70 | S & F Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm complete all as specified and directed. |
| 71 | S& F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 72 | S&F 50mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed. |
| 73 | Supply and fix 20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and as directed. |
| 74 | Supply and fix 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and as directed. |
| 75 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wallcomplete all as specified and as directed |
| 76 | S&F rotational moulded polythylene water storage tank (Cylendrical ,vertical with closed top) hoisted and fixed in position capacity 500 Ltrs all as specified in SSR Part-I complete all as specified and directed. |
| 77 | S&F ball valves of 20 mm bore high pressure of PTMT with empxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed complete all as specified and as directed(Minimum weight 20 gms-210 gms) |
| 78 | S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs including taking down the existing fitting complete all as specified and directed. |
| 79 | Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound complete all as specified and directed. |
| 80 | Supply and fix 110 mm bore PVC (SWR) bends in any types with acess door complete all as specified and directed. |
| 81 | Supply and fix 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 82 | M&L for 100 mm thick concrete bed to drain pipe (150 mm bore) with PCC (1:4:8) type D2 using 40mm graded stone aggregate including packing under and haunching aginnst the sides of pipe after they are laid jointed and tested complete all as specified and as directed. |
| 83 | S&F 150 mm bore reinforced Concrete pipe Class NP2 laid and jointed complete with collars |
| 84 | Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete. |
| 85 | M & L Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, in half brick built in cement mortar 1:4 complete as specified and directed. |
| 86 | M&L for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work. |
| 87 | M & L precast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in cover slab of manholes, septic tank etc, set in cement mortar (1:4) including necessary form, moulds etc and including taking out/removal of existing unserviceable cover slab from manholes /septic tank complete all as directed by Engr- in- Charge .(Note :- Reinforcement shall be measured and paid separately) |
| 88 | S & F for Mild steel round bars 10 to 12 mm dia as in Handles of Cover slabs |
| 89 | Supply, Laying,connecting,testing and commissioning of XLPE insulated and PVC sheathed ,armoured heavy duty UG cable with stranded alluminium conductors 10 sqmm x 2 core,1100 Volt grade, laid in trenches / surface / wall / roof / pole / through pipe,compleate all as specified and as directed Note :- (i) Pipe and bricks for cable protection and sand cushioning shall be measured and paid separately as per site . |
| 90 | Material and labour for sand cushioning with clean dry sand in trenches for cable protection complete all as specified and as directed.Note:- Punned depth shall only be measured and paid. |
| 91 | S & F bricks well burnt sub class ‘B’ bricks in trenches on cable as cable protection across the length of the cable (width wise) complete all as specified and as directed. |
| 92 | Supply and lay GI pipe 50 mm bore (dia) light grade in trenches/road/surface/pole/wall crossing for protection of cable with necessary fittings as required complete all as specified and as directed. |
| 93 | M&L for cutting hard standing / road for laying of cable / protection pipe complete all as specified and as directed. |
| 94 | Material and Labour for laying of 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobia l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. trenches or on fixed on wall 25 mm external dia complete all as specified and as directed. |
| 95 | Supply & fixing connecting and testing of PP-R Gate valve of size 25 mm bore and complete all as specified and directed. |
| 96 | Material and labour for fixing GI tubing medium grade on wall of 15 mm dia with all fittings all as specified and as directed. |
| 97 | Material and labour for fixing 15 mm dia gate valve/stop cock fancy type, chromium plated with long shank and cup (concealed type)all as specified and as directed. |
| 98 | Material & labour for Cutting Cast Iron pipes and reducing to required length in position for insertion of new tees, branches etc pipe all as specified and as directed. |
| 99 | Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed. Note for item Nos.1 to 2(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate.(ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate (iii) Cost of chase cutting for conduit wiring shall be included in the qouted rate |
| 100 | Ditto- all as per item No 99 here in above but with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase,neutral & earth for One 5pin 16 Amp Socket outlet on the independent board complete all as specified and as directed. |
| 101 | Material and labour for switch socket combination multi purpose 2 in 1, 5 Pin,5 and 15 Amps, flush type ISI marked complete all as specified and as directed. |
| 102 | Materials & labour for switch piano flush button 5/6 Amps single pole, 1 way 240 V ISI marked complete all as specified and as directed. |
| 103 | Materials and labour for ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and as directed. |
| 104 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 105 | Supply and fix LED light fitting, 1x10/12w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed |
| 106 | Supply and fixing LED street light fitting 25/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete all as specified and directed. |
| 107 | Supply and fix Exhaust Fan 300 mm, AC 230 V, 50Hz complete including all accessories as specified and as directed. |
| 108 | Supply and fix 25 Ltr capacity geyser 5 star rating 230V complete with all accessories all as specified and directed. |
| 109 | Supply & fixing MCB DB (Double door) SPN, 8 way sheet steel with bus bar, din rail, neutral link and earth bar with fitting & fixtures all as specified and directed. |
| 110 | Supply and fix MCB single pole 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. |
| 111 | Supply and fix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed |
| 112 | Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100mm C/C both way and two Nos lifting handle made of 12mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete all as specified in electrical plate No 3 of SSR Part-I . |
| 113 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender