Power Boards / Undertakings / PSU Closing in 17 days TDR #56659802

Tender For Repair And Renovation Of Project Dispensary, Sub-Station Building At Samdong Colony And Providing Rain Shed Above Staircase At Samdong And Dikchu Transit C Of Teesta V Power Station, Sikkim.

Issued by Boards / Undertakings / PSU · sikkim, Sikkim
Tender Value
28.44 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
17 days left
EMD
57000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
sikkim → Sikkim
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair And Renovation Of Project Dispensary, Sub-Station Building At Samdong Colony And Providing Rain Shed Above Staircase At Samdong And Dikchu Transit C Of Teesta V Power Station, Sikkim.

BOQ

Name of Work:- Repair and Renovation of Project Dispensary, Sub-station building at Samdong Colony and providing rain shed above staircase at Samdong and Dikchu Transit c of Teesta V Power Station, Sikkim.
Sl. No. Item Description
1Removing dry oil bond distemper by scrapping, sandpapering and preparing the surface smooth including repair stos cratches etc complete.
2Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
3Providing and Laying white or colored glazed tiles anti skid (elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) ofglossy series or celebrity, elegant or equivalent in flooring, treads ofsteps landing etc ofsize 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
4Providing and Laying white or colored glazed tiles of size 200mm x 300mm of plain/normal prints colours (white, grey, ivory, platinum, cream, glacier white, summersand, beach, wood duro, melody, or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry
5Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL,WEATHER SHIELD to givean even shade including brushing the surface clean of dirt, dust etc and sand papering and fillingthe scratches complete on old surface
6Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
7Distempering with dry distemper on old work (one or more coats) of requiredshade to give an even and uniform shade after thorough cleaning of dirt, dust, loose pieces of scale, grease etc including surface preparation by sand papering etc complete. Old surface.
8ENAMEL PAINTS Providing and painting with ready mixed paint of approved quality and shade witht wo or more coats to give an even and smooth shade including cleaning the surface complete on old surface.
9Providing and painting on G.S. sheet one or more coats with ready mixed paint to give an even shade including cleaning of surface of dust etc complete on old surface.
10Providing, fitting and fixing white vitreous china water closet (W.C) squatting pan(Orissa pan)580mm size with 100mm SCI (Sand cast iron) P or S trap,10ltr low level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and clamps, 20 mm over flowpipe, cutting and making good the wall and floor etc complete. Long type or Orrisa type pan. Orissa Pan 58x44 White CAT NO 20042. HINDWARE CA'I NO 20004
11Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes iointing of pipes & fittings with one step CPVC solvent cement and testing ofjoints complete as per direction of Engineer in Charge. Internal work - 15 mm nominal outer dia Pipes
12Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) BIB COCK 15 MM DIA
13Providing, Fitting and fixing Chromium plated fittings ofapproved quality and size complete: (ESCO ORIGINAL] ANCULAR STOP COCK 15 MM DIA
14Providing and fixing European water closet with seat cover 70 x 36 x75 83 cm Cat no: 20050 Each 1.00 (Starwhite) HINDWARE or equivalent, conforming to IS: 72 31, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
15Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screwscomplete. 30mm
16Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete. 1:4 mix.
17Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick
18Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete
19Providing and fixing Tower bolt 200x10mm with necessary screws etc complete
20Providing, fitting and fixing handles 125mm size with necessary screws etc complete.
21Providing, fitting and fixing. white vitreous china wash in surgeons type basin with CI bracket,painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, leador PVC connection 32mm dia 'CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE
22Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.
23Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm
24Providing and Laying Chequers tiles in on flooring over 12mm thick cement plaster (1cement, 3coarsedsand) 1:3 bare and jointed with white cementslurry.
25Providing & Laying in position cement concrete of specified grade including compacting curing etc all complete with Recron 3S of fiber length 6 or 12mm (125 gm of recron3S per a bag of cement) as per the directionof Engineer in Charge
26Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete :600 x 20 m
27Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides andramming of bottoms lift upto1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. Ordinary Rock
28Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means)
29Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregateof 20mm & down size) cron3S per a bag of cement) as per the direction of Engineer in Charge
30Centering and shuttering including strutting, propping etc. and removalof form for Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.
31Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead.
32Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18mm thick
33Removing dry oil bond distemper by scrapping, sandpaperingand preparing the surface smooth including repair stoscratches etc complete.
34Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
35Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL,WEATHER SHIELD to givean even shade including brushing the surface clean of dirt, dust etc and sand papering and fillingthe scratches complete on old surface
36Distempering with dry distemper on old work (one or more coats) of requiredshade to give an even and uniform shade after thorough cleaning of dirt, dust, loose pieces of scale, grease etc including surface preparation by sand papering etc complete. Old surface
37Providing / Fitting / Fixing 25 mm thick false ceiling / paneling of silver fir in wooden frames of timber equivalent to Katus or pakha saaj or equivalent excluding the cost of polishing and including cost of one coat priming on unexposed frame all complete.With locally available timber
38Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughlycleaning and sand papering etc complete.
39ENAMEL PAINTS Providing and painting with ready mixed paint of approved quality and shade witht wo or more coats to give an even and smooth shade including cleaning the surface complete on old surface.
40Providing and painting on G.S. sheet one or more coats with ready mixed paint to give an even shade including cleaning of surface of dust etc complete on old surface.
41G.I Barbed wire Fencing 1.8 metre high (Providing and fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 807 )
42Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
43Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to25 mm
44Providing and Laying white or colored glazed tiles anti skid (elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) ofglossy series or celebrity, elegant or equivalent in flooring, treads ofsteps landing etc ofsize 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
45Providing and Laying white or colored glazed tiles of size 200mm x 300mm of plain/normal prints colours (white, grey, ivory, platinum, cream, glacier white, summersand, beach, wood duro, melody, or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry
46Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
47Providing, fitting and fixing.white vitreous china water closet (W.C)squatting pan (Orissa pan) 580mm size with100mm SCI (Sand cast iron)P or S trap,10ltr low level flushing cistern with fittings,CI brackets, 32mm flush pipe with fittings and clamps, 20mm over flow pipe, cutting and making good the wall and floor etc complete. Long type or Orrisa typepan.Orissa Pan 58x44 White CAT NO 20042
48Providing, fitting and fixing. white vitreous china wash in surgeons type basin with CI bracket,painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, leador PVC connection 32mm dia 'CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE
49Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washeretc complete.
50Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete :600 x20 m
51Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes iointing of pipes & fittings with one step CPVC solvent cement and testing ofjoints complete as per direction of Engineer in Charge. Internal work - 15 mm nominal outer dia Pipes
52Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) BIB COCK 15 MM DIA
53Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL] ANCULAR STOP COCK 15 MM DIA
54Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer-in-Charge all complete.
55Providing, fitting, fixing of 24 BWG GCI sheet roofing with lapping of 150mm (two corrugation) with G.I.hooks,bolt sand nut 8mm dia with bitumen,GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint,on over lapping of sheet excluding carriage all complete.
56Providing fitting fixing ridges or hips of 60 cm overall width of plain 24BWG Galvanized Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
57Providing and painting on G.S. sheet one or more coats with ready mixed paint to give an even shade including cleaning of surface of dust etc complete on old surface.
58Random Rubble (RR) stone masonry in foundation and plinth in CM 1:3 (1 cement: 3 coarse sand) including leveling up with cement concrete 1:6:12 (1 cement: 3 coarse sand : 12 graded stone aggregate, 20 mm nominal size) at plinth level.
59Supplying & fixing recessed LED fitting 10 watts including connection etc as required.
60Wiring for light/Fan/Call bell & 6A plug point with 2x1.5 sq mm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 1.5 sq mm HR FRLS PVC insulated copper conductor single core cable as required.
61Wiring for 16A plug point with 2x2.5 sq mm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 2.5 sq mm FRLS PVC insulated copper conductor single core cable as required.
62Wiring for sub-main for light/fan/call bell & 6 amps plug point with 2x2.5 sq mm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 2.5 sq mm FRLS PVC insulated copper conductor single core cable as required.
63Wiring for sub-main with 2x6 sq mm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x6 sq mm FRLSH PVC insulated copper conductor single core cable as required.
64Supplying and fixing 1 no.16Amps socket & 16 amps switch,white plate(4 module)&Metal fux box(4module)including connection etc as required
65Supplying and fixing 1no.6Amps socket with 1no.6amps switch,1 no.3 module white plate & 1no3module metal flux box)including connection etc as required.
66Supplying and fixing LED tubelight fitting 22 watts 4ft including connection etc as required
67Supplying and installation of MCB distribution board Double Door 16 ways SPN(Single door)
68Supplying, installation,testing & commissioning of Miniature circuit breaker Single pole 6-32 Amps
69Supplying, installation,testing & commissioning of Isolator Double pole 40 Amps
70Supplying of wall mounting fan 18 \\"
71Supplying and fixing 1 way FT switch 8 no .06 amps FT switch with 1 no white 8 moduler plate and 8 moduler metal flux box.
72Supplying and fixing 1 way FT switch 6 no .06 amps FT switch with 1 no white 6 moduler plate and 6 moduler metal flux box.
73Supplying, installation,testing & commissioning of Ventilating Fan 250mm including connection as required
74Supplying of Heavy Duty Exhaust Fan 18\\"
75Supplying and fixing 1 way FT switch 3 no .06 amps FT switch with 3 no white 3 moduler plate and 3 moduler metal flux box.
76Supplying and fixing 1 way FT switch 2 no .06 amps FT switch with 2 no white 2 moduler plate and 2 moduler metal flux box.
77Supplying and fixing 1 way FT switch 1 no .06 amps FT switch with 1 no white 1 moduler plate and 1 moduler metal flux box.
78Supplying, installation,testing & commissioning of Isolator Double pole 63 Amps
79Supplying of white plate with frame (18 module)
80Supplying of Metal flux box (18 module)
81Supplying and Fixing LED wall mounting mirror light including connection etc. as required
82Supplying of Metal flux box (12 module)
83Supplying of white plate with frame (12 module)
84Supplying and installation of MCB distribution board Single Door 8 ways SPN(Single door)
85Supplying and installation of MCB distribution board Single Door 12 ways SPN(Single door) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56659802
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 28.44 Lakhs
LAST DATE 17-08-2026
Authority
Authority Name National Hydroelectric Power Corporation Limited
Work Description Tender for Repair And Renovation Of Project Dispensary, Sub-Station Building At Samdong Colony And Providing Rain Shed Above Staircase At Samdong And Dikchu Transit C Of Teesta V Power Station, Sikkim.
Basic Detail
Tender No NH/TSV/Cont/CC-355/NIT-1089
Bidding Type Tender
Location
City sikkim
State Sikkim
Key Dates
Publish Date 25 Jul 2026
Submission Date 17 Aug 2026
Open Date 22 Aug 2026
Finance
Tender Value 28.44 Lakhs
Tender Fee 590
EMD 57000
Exemption Available
Document List
7edab343-0988-4882-b460-c3b01256445e.html
BOQ_965878.xls
SafetyManualaug2024.pdf
TDCC355.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 25, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 17, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Aug 22, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

7edab343-0988-4882-b460-c3b01256445e.html

xls

BOQ_965878.xls

pdf

SafetyManualaug2024.pdf

pdf

TDCC355.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders