Tender For Special Repair To Building Number P-70 Of Number 5 Det At Patiala Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Aug 2026
8 days left
EMD
41280
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Building Number P-70 Of Number 5 Det At Patiala Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc Complete all as specified. |
| 2 | M&L Ceramic Non-skid colouerd tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc.set and jointed in neat cement slurry over and including screed bed 15 mm thick in CM 1:6 with and pointed in coloured cement match the colour of tiles all as spd all as specified. |
| 3 | M&L for vitrified ceramic tile light shade tiles 8 - 10 mm thick (square/ rectangular) polished, area of each tilesexc 0.42 sqm but not exceeding 1 sqm, in floors etc. set and jointed in neat cement slurry over and including screed bed 15 mm thick in CM 1:6 and pointed and including Epoxy Cartridge tile Grout using fill the joint of tiles complete all as specified.Note- Epoxy Black,Golden Colour. |
| 4 | M&L for 7-to 8mm ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 7-8 mm thick, in any pattern of light & dark/highlighters etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified |
| 5 | M & L for 12 -14 mm thick Artificial Granite (of any type) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed 20 mm thick in CM 1:6 complete all as specified. |
| 6 | M & L for Machine cut cudappa stone slab 20 - 25 mm thick over and including screed bed 15 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 7 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified. |
| 8 | Taking up or down existing steel tubing and connections, 15mm bore complete all as specified. |
| 9 | S&F for CPVC pipe fixed on wall/ceiling or laying in floor of 20mm bore fittings. |
| 10 | Taking up or down existing steel tubing and connections, 20mm bore complete all as specified. |
| 11 | S&F for CPVC pipe fixed on wall/ceiling or laying in floor of 25mm bore fittings. |
| 12 | S & F in repairs 15 mm dia Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 13 | S & F in repairs 15 mm dia bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified. |
| 14 | S & F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified. |
| 15 | S & F in repairs Vitreous China oval shape wash basin, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated with waste pipe complete all as specified. |
| 16 | S & F 32 mm dia Low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified. |
| 17 | S & F in repair brass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified. |
| 18 | S & F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) white ( excluding fixing bolt, flushing cistern and flush pipe ) complete all as specified. |
| 19 | S & F in repairs 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified. |
| 20 | S & F in repairs Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. |
| 21 | S & F 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified. |
| 22 | S & F PVC connections15 mm size with PTMT nuts of length 450 mm complete all as specified. |
| 23 | Dismantling water tanks and removing to store of capacity exc 500 & not exc 1000 ltrs. |
| 24 | Supply and and fixing, hoisting PVC tank of 1000 ltr capacity including Supplied and fixed 20mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed. |
| 25 | S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. |
| 26 | S&F soap dish chromium plated and type fixed to plugs with CP brass screw fixed in repairs. |
| 27 | S&F PVC Cabinet 600x450mm overall size with looking mirror of selected qality glass mountedover PVC Framing as per sample complete fixed in repair complete all as specified. |
| 28 | S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified. |
| 29 | S&F 8mm thick corner glass shelf with polished edges and rounded corner fixed on wall using stainless steel/shelf brackets and necessary fitting and including brass screws and wooden/plastic cleats all as specified and directed by Engr-in-charge. |
| 30 | S&F CP Health faucet with 1.2 mtr long CP tube including MS/anodised hanging device fixed in repairs complete all as specified and as directed. |
| 31 | Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed. |
| 32 | S & F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 38mm x 38mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and including 7-8 mm thick GRG Ceiling boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed. |
| 33 | Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc complete all as specified and as directed. |
| 34 | M&L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 35 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth ( without using extra cement ) with sagol finish on plastered surface complete all as specified and as directed. |
| 36 | M&L for rendering 5mm thick plaster in CM (1:3) on faces of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed. |
| 37 | M&L for preparation of new decorated plastered or unplastered surfaces of walls and applying two coats of weather emulsion colour as directed by Engr-in-charge over one coat of primer over 2mm thick Putty for levelling and smoothening, of surfaces complete all as specified and directed. |
| 38 | M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1.5mm thick wall care putty over one coat of primer complete. |
| 39 | M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed. |
| 40 | Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified. |
| 41 | M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection/floors complete all as specified and directed. |
| 42 | Demolition of brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar complete all as specified. |
| 43 | M&L fly ash bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size brick complete all as specified. |
| 44 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 85 mm X 45 mm size, applying PVC solvent cement and screwed with full body threaded, star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with mild steel hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge. |
| 45 | All as per item no 44 but frame size 65x125mm double rebate. |
| 46 | S&F 28-30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified |
| 47 | S&F 28-30 mm thick moulded WPC factory made 100% Sketon/Glased door (conforming as per IS-4020) made from 100% lead free single extruded with and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified |
| 48 | S&F factory made WPC extruded board CNC machine cut jali fixed to Skelton door as per approved design complete all as specified and directed by Engg -in-charge. |
| 49 | S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete fixed all as specified. |
| 50 | Taking down chowkat or frame with shutters (with out taking off shutter from the frame ) not exceeding 1.5 Sqm each as directed by Engineer-in-Charge. |
| 51 | Taking down chowkats or frames exc.1.5 sq.m but not exc. 4 sq.m each but with shutters ( without taking off shutters from the frame ) and removing to or from store complete all as specified and as directed. |
| 52 | Taking down shutters of any description exc 1 sq.m and n.exc 2 sq.m each store complete all as specified and as directed. |
| 53 | S & F factory made powder coated aluminium (powder coating shall not be less than 50 micron) sliding window,three track shutters, (two track glazed and one track wire mesh)side hung type with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 5mm thick and incl GI wire mesh 0.56 mm nominal dia of wire and average width of aperture 1.18 mm , size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member shall be 1.20mm thick complete all as specified. |
| 54 | S&F in repair stainless steel of 25 mm bore minimum 1.0 mm wall thickness as in curtain rod complete incl accessories like brackets, stops etc all as specified & directed. (For the purpose of mesurement and payment running length of curtain rod only shall be considered.) |
| 55 | M&L for preparing old decorative plastered surface of walls by removal of existing treatment washing rubbing down and applying two coats of distemper oil emulsion over a coat of chalk whiting primer over one coat of wall care putty 1.5mm thk all as specified and directed by engr-in-charge. |
| 56 | S&F looking mirror of size (600x450) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial, plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as directed by Engr-in-Charge |
| 57 | S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixing complete all as specified. |
| 58 | S & F Butt hinges, medium weight, cold rolled mild steel, and fixed 75 mm length complete all as specified. |
| 59 | S & F Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, and fixed 100 mm length complete all as specified. |
| 60 | S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 100 mm complete all as specified. |
| 61 | S&F S.S powder coated Black (matt finish) handles 100mm complete |
| 62 | S&F S.S powder coated Black (matt finish) handles 150mm complete |
| 63 | S&F S.S powder coated Black (matt finish) tower bolt 200mm long complete |
| 64 | S & F Butt hinges, medium weight, stainless steel, and fixed 100 mm length complete all as specified. |
| 65 | S & F 300mm aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. |
| 66 | S&F in repair for glavinized mild steel wire cloths 0.56mm nominal dia and avrage width of apreture 1.18mm & fixed with tint tacks or glavinized wire staples all as specified. |
| 67 | M & L for Cement concrte Type C1 1:3:6 ( 20 mm graded aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges all as specified. |
| 68 | Dismantling PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and directed by Engr-in charge.. |
| 69 | S&F for PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed. |
| 70 | S&F for PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed. |
| 71 | S&F for PVC (SWR) bends with access door 110 mm dia complete all as specified and as directed. |
| 72 | All as per item No 71 above but 75 mm dia. |
| 73 | S&F PVC (SWR) plain bend 110 mm dia complete all as specified and as directed. |
| 74 | S&F PVC (SWR) plain bend 75 mm dia complete all as specified and as directed. |
| 75 | S&F PVC (SWR) branch piece single or double T equal or unequal with access door 110 mm dia complete all as specified and as directed. |
| 76 | All as per Item No 75 but 75 mm dia. |
| 77 | S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed. |
| 78 | M&L for preparation of old painted wood & wood based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying one coat on synthetic enamel paint complete all as specified and as directed. |
| 79 | All as per item No. 78 above but on steel & Iron surfaces. |
| 80 | Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where complete all as specified and directed. |
| 81 | Demolition of cement concrete of any description (Unreinforced) below or above ground floor incl concrete at junctions of parapets and roof terraces, flashings, Kerbs walls,PCC fillets, benching,coving of chajjah top/junctions etc complete all as specified and directed. |
| 82 | Supply only integral water proofing compound. |
| 83 | M &L for providing plain cement concrete 1:3:6 type B-1 (using 20 mm graded stone aggregate) for roof as in padding etc complete all as specified and as directed . |
| 84 | M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing liquid finished even and fair without using extra cement complete all as specified. Note: Water Proofing liquid shall be measured and paid separately. |
| 85 | M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :-i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sq.M ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg / Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer's iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesble roof surfaces complete all as per manufacturer's instructions and as directed . |
| 86 | M&L special treatment to floor/wall of bathroom with 10mm thick plaster in CM 1:4 with WPC liquid Complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plastered surfaces.rendering again 10mm thick in CM 1:4 mixed with Complast - 421 complete all as specified and as directed. |
| 87 | S&F factory made UPVC black colour (Matt Finish) door shutter made of extruded profile with wall thickness of 2.3mm(+-0.2mm) door profile with hollow section with multy chamber. Frame (60x62mm),sash(42mmx67mm).sliding interlock(one verticle length in each shutter)(45.5mmx28mm).Glazing bead(24.5mmx16mm)will be mittred cut and fusion welded at all corner.including drilling holes for fixing hardware and drainge of water etc am,.making arrangement for fixing of hardware.EPDM gasket,1.2+0.2 mm thick galvanised steel frame(30mmx21.5mm).sash (30mmx18mm)profile to be inserted in required profile.frame will be finshed to the wall with 8mmx100mm long fasteners.hardware touch lockof zinc alloyed(brown powder coated)steel roller system including 5mm thick glazing with selected quality glass ,. Note.The unit rate coated by contractor includes cost of glass and all other conncted accessories, handle ,hinges etc.Make:H2O window,Fenesta,Anuplast |
| 88 | S&F for powder coated aluminium (powder coating shall not be less than 50 micron) ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. |
| 89 | S&F Kitchen cabinets including all fittings and fixtures incl the follwing. (Depth 0.45 to 0.6m) (a) 19mm thick commercial block board,Make: kitply/Duro/National Ply wood (b) 1mm thick commerical lamination on both side fixed to black board(colour and design as approved) (C) SS pullout basket SS finish of plain 15'' x 20'' x 6'' (3Nos) (D) 'D' type handle 100mm SS finish (1 Each shutter) (E) Pullout basket SS finish cutlery wire of size 15''x20''x4'' (as reqd) (F) 2nd class hard wood as in frame work . (G) SS channels for pullout basket as required. (H) S.S concealed dado hinge of approved make. (Note:- The measurement shall be taken from front elevation and not girthwise. |
| 90 | S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm.with 32 mm dia Waste fittings, brass chromium plated. |
| 91 | S&F framed work such as grills,gratings etc with ends of bars shoulderd and or riveted,or forged into spikes,framed guard bars,barred iron doors,ladder,framed balusters,walk ways,railing frame work of water tank and similar work all as specified. |
| 92 | S&F 15 mm bore 2way bib cock with wall flange, cast copper alloy, chromium plated, fancy type with screwed down, screwed for iron pipe or for brass ferrule long body.Make: Jaquar Cat part No OPP-15037PM or equivalent /Hindware/Kohlar. |
| 93 | M&L of false ceiling in step(s) comprising of 12mm thick Gyp board including GI frame work for seamless ceiling made of GI perimeter channel 0.55mm thick with two unequal flange of 20 to 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flange of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thicknesshaving kurledweb of 50mm and flangeof 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre with and including two coats of plastic emulsion paint complete all as directed. Make-India Gypsum/Gyproc/Lafarge.(Note:- The measurement shall be made from wall to wall without considering step(s). |
| 94 | M & L for PCC 1:4:8 type D-2 using 40mm graded stone aggretgate, as in base /hardstanding etc complete all as specified and directed. |
| 95 | M&L for winter/Rockard/400x400x30mm thick factory made coloured designer polished floor tiles flooring laid over & including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed . Make-Nitco or equivalent in Kajaria /H.R johnson |
| 96 | Dismantling of asbetos/fibre cement corrugated/semi corrugated sheet in roof covering including ‘J’ or ‘L’hooks complete all as specified. |
| 97 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedNote : Fixing of sheets will be done strictly according as per manufacurer's instructions. |
| 98 | S&F MS work in tubular/pipe/angle sections for frame work for roof, vertical poles, s rafters and purlins including washer etc complete all as directed. |
| 99 | Supplied and fixed for framed work as in doors or gates,ladder of angle or other section with gusset Plate, rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conf. to Fe-410-0 or Fe-310-0 all as specified and directed. Note : Distrubed surfaces of wall shall be made good to true surface. |
| 100 | S&F Kitchen cabinets including all fittings and fixtures incl the follwing.(a) 19mm thick board of commercial block board,Make: kitply Duro/National Ply wood (b) 1mm thick commerical lamination on both side fixed to black board(colour and design as approved) (C) 'D' type handle 100mm SS finish (Each shutter-01Nos ) (D) 2nd class hard wood as in frame work E) 6mm thick plywood as reqd.(F) S.S concealed dado hinge of approved make as reqd.(Note:- The measurement shall be taken from front elevation and not girthwise. |
| 101 | M&L for complete removal and preparation of new decorated plastered or unplastered surfaces of walls and applying two coats of weather emulsion colour as specified and directed by Engr-in-charge over one coat of primer over 2mm thick wall care Putty for levelling and smoothening, complete all as specified and directed. |
| 102 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick, watering, and removing surplus soil to a distance n exc 50 m and making good surface |
| 103 | S&F Salt glazed stone-ware gully traps,Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' incl CI grating fixed in repair complete all as directed and specified. |
| 104 | M&L for Providing precast concrete type B-1, 1:2:4 (using 12.5mm graded stone aggregate) as in kerb blocks with plain fiar faces including chamferes, weathering, throating etc and setting in mortar 1:4 complete with joints to match. |
| 105 | S&F stainless steel plate rack of size 600x600mm and depth of shelves 230mm to be hanged on wall by the help of steel screws grouted in walls with rawl plug design as approved by GE. |
| 106 | M&L solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC as per specification & drawing of make-Rajshree/sintex or equivalent as approved by GE. |
| 107 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per spection & drawing. |
| 108 | S&F in repairs door closer hydraulically regulated of aluminium (die cast ) body designation No-2,universal type,suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed all as specified and as directed. |
| 109 | Complete removal of existing treatment including washing rubbing down and stopping of painted surfaces and applying 1-2 mm thick metallic texture painting (Top quality) on walls in any colour/shade/pattern/design including preperatory work for base by applying primer/putty coat by any authorised applicator of paint manufacturers complete all as specified and directed |
| 110 | S&F for ACP sheet 4mm thickness of apporved plain colour /sheds for chajja /sun shade/cladding and the like works etc all as specifiedNote : Fixing of sheets will be done strictly according as per manufacurer's instructions. |
| 111 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth all as specified. |
| 112 | Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc all as specified and directed. |
| 113 | M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor for one light/fan/bell point in and including NEW PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with PVC modular top cover plates of suitable size for mounting of modular type switches/sockets/regulators including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engr-in-charge.Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) -Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item. |
| 114 | All as per Sl item No 113.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed. |
| 115 | All as per Sl item No 113.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed. |
| 116 | All as per item No. 113.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board. |
| 117 | S & F in replacement of Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified. |
| 118 | S & F in replacement of Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified. |
| 119 | S & F in replacement of Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified. |
| 120 | S & F in replacement of Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified. |
| 121 | S & F in replacement of Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified. |
| 122 | S & F in replacement of ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed |
| 123 | Supply and fix incl taking down antique look decorative surface mounted classic living room wall light with base cap B22/E27 body made with METAL and glossy GLASS having fitting capacity upto 20 watt. connection with twin core twisted flexible copper conductor cable .75X2 Sqmm with proper clamps complete all as specified and directed by Engr in Charge. |
| 124 | Supply and fix surface/recess mounted LED luminaire 36 watt cool white 4000-5000K suitable for gridd celling cutout dimensions: 2x2 Ft. incl connecting with twin core copper wire from ceiling rose to fitting, Fixture size: (LxWxH) in (595x595x65) mm incl lamp and driver all as specified & directed. |
| 125 | S&F surface mounted Slim design LED round Downlight with Superior light output and internal driver 20 Watts 230 volts with internally pre-wired and including connecting up with two core twisted flexible copper conductor cable with suitable size compelte all as specified and directed by Engineer-in-Charge. |
| 126 | S & F in replacement of New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge. |
| 127 | S & F in replacement Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge. |
| 128 | S & F in replacement of Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable all as specified & directed by Engr-in-charge. |
| 129 | Supply and fix mirror light with linear & compact 12 W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt complete all as specified and directed by Engr-in-charge. |
| 130 | M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring. |
| 131 | S & F MCCB, 4 Pole, 125 A, 25 KA for fixing in DB including proper thimble connection, thermal and magnetic release protection complete all as specified and directed by Engineer-in-charge. |
| 132 | Supply and fix in replacement of epoxy power coated MCCB distribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimbles used for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size complete all as specified and directed by Engr-in-charge. |
| 133 | Supply and fix in replacement of Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specified & directed by Engr-in-charge. |
| 134 | S & F in replacement of MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge. |
| 135 | Supply and fix in replacement of MCB , SPN, 240 Volts ,40-63 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge. |
| 136 | M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring. |
| 137 | M & L in replacement of UNSV Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification |
| 138 | Taking down and refixing of ceiling fan after supply and replacement of rubber reel, round cover plate of size 6 inch of ceiling fan complete with ms split clamp two Nos, nuts and bolts complete all as specified and directed by Engr-in-charge. |
| 139 | Supply and fix Exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver complete all as specified and directed by Engineer-in-Charge. |
| 140 | Supply and fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver complete all as specified and directed by Engineer-in-Charge. |
| 141 | Material and labour for making hole of suitable size for exhaust fan 250 mm/ 300mm sweep in wall for grouting and making good the surface complete all as specified and directed by Engr-in-charge. |
| 142 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with MCB SPN 32 Amps, complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender