Tender For Welcome Maintenance And Certain Misc B/R And Electrical And Mechanical Repairs To Offrs Md Accn At Kelvin Grove Under Ge (I) Jutogh
Tender Value
27 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
18 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance And Certain Misc B/R And Electrical And Mechanical Repairs To Offrs Md Accn At Kelvin Grove Under Ge (I) Jutogh
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floor hearth or wall tiling/stone slabe incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed. |
| 2 | Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 3 | Supply only Integral waterproofing compound, complete all as specified and directed. |
| 4 | M&L for plain cement concrete 1:3:6, type C-2, using 40mm graded crushed stone aggregate, 75mm thick as in plinth protection, path et., |
| 5 | M&L for 40mm thick cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in base course for floors, complete all as specified and directed. |
| 6 | M&L for non skid ceramic tiles 7-8mm thick coloured (Square/ rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed as in cement mortar 1:6, complete all as specified and directed. |
| 7 | M&L for glazed coloured ceramic tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 8 | M&L for vitrified ceramic tiles 10mm thick (light shade, Square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed as in cement mortar 1:6, complete all as specified and directed. |
| 9 | M&L for vitrified skid ceramic tiles 10mm thick (light shade, Square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surface such as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 10 | Demolition of Stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons,cooking platform etc., complete all as specified and directed. |
| 11 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in pillar/vertical surface, cooking platform and like over and including 15 thick screed bed in cement mortar 1:4 including edges of stones slabs one edges such as cooking steps or etc, moulding, pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 12 | M&L for machine cut kota stone slab flooring 20-25mm thick laid over screed base in floor and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete over and including 15 mm thick screed bed or bedding with CM 1:6, complete all as specified and directed. Note:- (i) The rate of kota stone shall be deemed to include for full rounded off corner/ edges including holes for pipe, all cutting to make it square or rectangular. (ii) The rate shall also be deemed to include for cutting and polishing machine and kota polishing to acheive the desired finish. |
| 13 | M&L for machine cut kota stone slab 20-25mm thick in riser steps, skirting, dado, nosing and pillar over 10mm thick cement screed base laid with CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, etc., complete all as specified and directed. Note:- (i) The rate of kota stone shall be deemed to include for full rounded off corner/ edges including holes for pipe, all cutting to make it square or rectangular. (ii) The rate shall also be deemed to include for cutting and polishing machine and kota polishing to achieve the desired finish. |
| 14 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 15 | S&F 1.5mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, homogenious laid with approved rubber based adhesive in floors complete all as specified and as directed (including dismantling of old PVC sheet from floor and removing from site), complete all as specified and directed. |
| 16 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise, complete all as specified and directed. |
| 17 | M&L for reinforced cement concrete 1:2:4. (nominal mix), type B-1, using 20 mm graded crushed stone aggregate as in chajjas, columns/beams/slab, landings and in shelves, complete all as specified and directed. |
| 18 | S&F mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally for hooping, for columns,hooking end and binding with MS wire annealed not less than 0.9mm dia or secure with clips, complete all as specified and directed. |
| 19 | Use & Waste of formwork to chajjas, slab, column, beams, chullah hoods, troughs and similar items including edges rough finished surfaces, complete all as specified and directed. |
| 20 | Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, tiling etc complete including removal of debris to a distance not exc 500m, complete all as specified and directed. |
| 21 | M&L for rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed. |
| 22 | M&L for rendering 15 mm thick on fair surfaces of brickwork or concrete surfaces in CM 1:4 finished even and smooth (without using extra cement), complete all as specified and directed. |
| 23 | M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a coat of 3mm thick wall care putty on walls, complete all as specified and directed. |
| 24 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces at any height of building / tower, complete all as specified and directed. |
| 25 | Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets, complete all as specified and directed. |
| 26 | M&L for solid PVC wall/ ceiling lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications including necessary beading work, and same board beading for joint sealed, complete all as specified and directed. |
| 27 | S&F false ceiling at all height will GRG (Glass reinforced Gypsum) false ceiling tiles 12mm thick of size 595x595 mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 TO 0.75 Aas per 8225:198/, Non combustible as per BS 4/6 (Part 4)19/10 and reflectance of 85% (miniumum) to be laid in true horizental level suspended on inter-locking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized@120grams per sqm on both sides) comprising of main T runners of size 5x32mm of length 3000mm,cross T of size 15x32mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length 600mm to from grid module of size 300x600mm, suspended from ceiling using galvanized mild stell itoms (galvanizing@grams per sqm)i.e. 50mm long,8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 24x24x0.40mm of length 3000mm to be fixed on perlphery wall/partion with the help of plastic, with perforated 12mm thick nicro tegular edged GRG false ceiling tiles including hanging hanger, complete all as specified and directed. |
| 28 | Dismantling timber scantlings, framed/unframed work of size 40 sqcm and over in section, in any position etc., complete all as specified and directed. |
| 29 | M&L for second class hardwood clean Sawn timber scantling/ posts, complete all as specified and directed. |
| 30 | Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, etc under 40 sq cm in section in any position with nails etc., complete all as specified and directed. |
| 31 | M&L for plain fillets of second class hard wood, square, rectangular or triangular in section, clean sawn, secured with nails or brads; sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm, complete all as specified and directed. |
| 32 | M&L for chamfers, splays, grooves, rebates, rounded angles, rounded nosings, tongued and grooved edges (each tongue and each groove measured) etc., Mouldings n exc 75mm girth on softwood, complete all as specified and directed. |
| 33 | Providing and fixing seasoned Pine Wood Ceiling/Panelling using solid pine wood planks of minimum 8 feet length, having a thickness of not less than 12 mm and width of 100 mm to 150 mm, as per approved design. The pine wood shall be kiln-dried to a moisture content of 10–12% and shall be free from warping, cracks, sapwood, insect infestation and knots larger than 10 mm. Planks shall be machine-planed on all sides with tongue and groove joints or shiplap joints, if specified and fixed over a pre-installed wooden or metal framework using approved screws, nails, or concealed fasteners. The ceiling shall be polished with two coats of PU polish of approved brand and shade over a base coat of wood sealer, including all sanding and surface preparation to achieve a smooth and uniform finish, complete all as specified and directed. Rate shall include: (a) Supply of seasoned pine wood planks. (b) Surface treatment, polishing materials and labour (c) Fixing hardware (d) Skilled labor, scaffolding, and all incidental worksNote: Framework will be paid separately. |
| 34 | S&F 4 mm Veneered decorative teak plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws/adhesive solution to plywood/flush door shutter and polished with two coats of PU polish of approved brand and shade over a base coat of wood sealer, including all sanding and surface preparation to achieve a smooth and uniform finish as in wall panelling, complete all as specified and directed. |
| 35 | S&F 9 mm plywood grade BWR type BB fixed with screw to timber frame as in wall panelling, complete all as specified and directed. |
| 36 | Demolition of brick or stone masonary built in cement mortar including all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, at any height, complete all as specified and directed. |
| 37 | M&L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6, complete all as specified and directed. |
| 38 | M&L for brick work with sub class 'B' brick, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified. |
| 39 | Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital or similar pattern roof covering, fixed with J/L hooks or coach screws, complete all as specified and directed. |
| 40 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. |
| 41 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall,eaves board fixed with self tapping screws as specified. |
| 42 | S&F 0.50mm thick prepainted aluminium zinc coating liner profile high strenth steel sheet in an attractive, slightly fitted wall & ceiling cladding for exterior and interior use on straight or curved surface all as specified and directed. |
| 43 | Dismantling wrought iron or mild steel work of any description not otherwise provided,complete all as specified. |
| 44 | S&F mild steel work in roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam,tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W(Gde-E- 250) quality-A etc complete all as specified and directed. |
| 45 | S&F mild steel Framed work such as grills, gratings, ornamental gates,etc.,with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladder; framed baluster; walk ways; railing; framework of watertanks staging and similar work conforming to Fe-290. Gde-E-165, complete all as specified and directed. |
| 46 | M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 47 | Hacking Out Old Broken Glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with Beads, of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. |
| 48 | S&F sheet glass ordinary quality 4 mm thick glazing in square/ rectangle n.exc 0.50 sqm each pane with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. |
| 49 | S&F sheet glass 4.00 mm thick figured glass pin headed type and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sq.m in each pane, complete all as specified and directed. |
| 50 | S&F sheet glass 5.5 mm thick in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 51 | Taking down chowkhat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed. |
| 52 | Taking down chowkhat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each complete all as specified and directed. |
| 53 | Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed. |
| 54 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in the same opening complete all as specified and directed. |
| 55 | S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 56 | S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately). |
| 57 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge and making it good to match with existing surface, complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 58 | S&F anodized powder coated (powder coating color/shade as approved by GE) aluminium frame/ shutters for doors, windows, ventilators of powder coating minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing and cleat for receiving glass/wire mesh etc., complete all as specified and directed. |
| 59 | S&F Aluminium anodised powder coated sliding type two/three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass, size of frame 93.00 x 31.75 x 1.3 mm thick for top and sides, 93.00 x 31.75 x 1.3 mm thick, bottom and shutter frame 38 x 18 x 1.5 mm thick., Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts, stopper etc., complete all as specified and directed. |
| 60 | S&F aluminum section powder coated (powder coating color/ shade as approved by GE) of colour as approved door with frame and shutters partially gauze and PVC composite board 5mm thick fixed with aluminium clip section door section of aluminium door shutter, complete all as specified and directed. |
| 61 | S&F 30mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including teak wood beading alround the shutters, complete all as specified and directed. |
| 62 | S&F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. without sash bars edges of frame plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sized of members of shutter with three number of pannels, complete all as specified and directed. |
| 63 | S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of window shutters as specified in SSR Part-I, complete all as specified and directed. |
| 64 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading, complete all as specified and directed. |
| 65 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading, complete all as specified and directed. |
| 66 | Dismantling boarding any description, fixed in any position with nails for cupboards complete all as specified and directed. |
| 67 | S&F 18/19mm thick, block board, grade 2 quality interior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed. |
| 68 | S&F 0.90mm thick decorative laminated sheet type I of surface finish, colour and pattern as approved fixed with adhesive as per manufacture instruction complete all as specified. |
| 69 | S&F Continous piano hinges mild steel bright finish or electro galvanised with open flap width 30mm, fixed with screw complete all as specified and directed. |
| 70 | S&F D-type cabinet handles premium quality, stainless steel 304/ gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed. |
| 71 | S&F magnetic catches 75 mm brass body for use in cup boards of kitchen, ward robes etc., complete all as specified and directed. |
| 72 | S&F mild steel heavy duty telescopic soft close slide full extension ball bearing drawer slides of size 18 inch (silver) for use in cup boards of kitchen, ward robes etc., complete all as specified and directed. |
| 73 | M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 74 | S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed. |
| 75 | S&F 300mm Mild Steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 76 | S&F aluminium extruded alloy handles fabricated type anodised 125mm long, complete all as specified and directed. |
| 77 | S&F aluminium extruded alloy handles fabricated type anodised 100mm long complete all as specified and directed. |
| 78 | S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size complete all as specified and directed. |
| 79 | S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed. |
| 80 | S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long complete all as specified and directed. |
| 81 | S&F in repair floor door stoppers 140mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floors complete all as specified and directed. |
| 82 | Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed. |
| 83 | Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed. |
| 84 | M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed. |
| 85 | S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore complete all as specified and directed. |
| 86 | S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore complete all as specified and directed. |
| 87 | S&F in repair rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical Vertical with closed top) three layered hoisted and fixed in position all as specified in SSR Part-I etc., complete including 20mm dia float valve and dismantling of existing tank, complete all as specified and directed. |
| 88 | S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical Vertical with closed top) three layered hoisted and fixed in position all as specified in SSR Part-I etc., complete including 20mm dia float valve and dismentling of existing tank, complete all as specified and directed. |
| 89 | S&F in repair 20mm ball valves high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screw for iron pipe mini weight for 210 gms, complete all as specified and directed. |
| 90 | S&F 21-22 inch dia galvanised mild steel pan mortar (Tasla/ ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut bolt with 8 Nos washer including fixing on water storage tank as tank cover, complete all as specified and directed. |
| 91 | M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and nexc. 500 ltr complete all as specified and directed. Note : Any damage to Float valve, pipe etc., shall be made good by the contractor without extra cost. |
| 92 | M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 500 Ltr and nexc. 1000 ltr complete all as specified and directed. Note : Any damage to Float valve, pipe etc., shall be made good by the contractor without extra cost. |
| 93 | S&F in repair 20mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for Iron pipe or for unions and fixed complete all as specified and directed. |
| 94 | S&F in repair 15 mm dia Angle/stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified and directed. |
| 95 | S&F in repair 15mm bore chromium plated bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 96 | S&F in repair 15mm brass chromium plated wall mixer for mixing hot and cold water with telephonic shower, complete all as specified and directed. |
| 97 | S&F in repair 15mm brass chromium plated wash hand basin/ kitchen sink mixer for mixing hot and cold water, complete all as specified and directed. |
| 98 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 99 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 100 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, complete all as specified and directed. |
| 101 | S&F 15mm size PVC connection pipe with PTMT nuts of length 600mm long, complete all as specified and directed. |
| 102 | S&F in repair 32mm dia PVC waste pipe for wash hand basin and kitchen sink of length 900mm long with PTMT nuts, complete all as specified and directed. |
| 103 | S&F in repair vaccum pressure vitreous China wash down water closet (Pedestal pattern) coloured including all fittings, fixing bolts, waste pipe, inbuilt flushing cistern and flush pipe, complete all as specified and directed. |
| 104 | S&F in repair vitreous China wash basin pedastal pattern super white/ colour of size 560mm x475mm including all fittings complete, decorative type complete, fixed, complete all as specified and directed. |
| 105 | S&F in repair Vitreous China squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest including trap set and including concrete complete including making good to floor etc (excluding flushing cistern and flush pipe), complete all as specified and directed. |
| 106 | S&F in repair PVC low level flushing cistern 10 Ltr capacity valveless symphonic action type white as approved with inlet ball valve flat back & handle including brackets, complete all as specified and directed. |
| 107 | S&F in repair Wash basins, vitreous china (flat back or angle back type) size 550x400mm white , including cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling, complete all as specified and directed. |
| 108 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 109 | S&F in repair 25mm dia stainless steel chromium plated curtain rails fixed with brackets, stops, rollers, etc., complete all as specified and directed. |
| 110 | S&F in repair stainless steel plate rack (utencil rack for kitchen of size 900x750x250mm and min 0.80 to 1.00 mm thick sheet fixed with stainless steel screw and rawl plug, complete all as specified and directed. |
| 111 | S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastecoupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size 410x330x160mm, complete all as specified and directed. |
| 112 | M&L for 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 113 | S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, walls etc. complete all as specified and directed. |
| 114 | S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, walls etc. complete all as specified and directed. |
| 115 | S&F PVC SWR Bends in any radius 110 mm bore with access door complete all as specified and directed. |
| 116 | S&F PVC SWR Bends in any radius 75 mm bore with access door complete all as specified and directed. |
| 117 | M&L for water proofing treatment of sunken floor of WCs, Bathroom etc. floor and sides by applying of the following specifications:-(i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc.and remove all loose/unsound material, dirt, dust, etc.(ii) Applying cement slurry mixed with acrylic based polymer modified cementitious composite compound coating Hydroproof Xtra of FOSROC/ Equivalent of Dr Fixit of pidilite industries Ltd in the ration of 1:2:4 (One part of acrylic polymer : Two part of water and four part of cement).(iii) First layer of cement slurry @ 0.444 Kg/Sqm mixed with acrylic based modified cementious composite compound @ 0.222 Litre/Sqm and allow it to air dry for 04 Hours.(iv) Second layer of cement slurry @ 0.222 Kg/Sqm mixed with acrylic based modified cementious cpmposite compound @ 0.111 Litre/Sqm and allow it to air dry for 04 Hours followd with water curing for 48 hours.(v) 200 micron thick polythene film shall be pasted with helpof adhesives over treatment.(vi) Supply & fix of spout pipe 40mm dia GI pipe medium grade, 450m long (for draining out the water).Note:- Joints of WC/ Trap/ Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work. |
| 118 | M&L for plain cement concrete 1:4:8, type D-2, using 40mm graded crushed stone aggregate, as in filling and mass concrete under floors, complete all as specified and directed. |
| 119 | M&L for mild steel works as in bends straps, hold fasts etc, conforming to IS-206 (Fe-290), embedded portion, complete all as specified and directed. |
| 120 | M&L for Plain Cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even including necessary form work, complete all as specified and directed. |
| 121 | M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel / drains including fair finises & necessary formwork, complete all as specified and directed. |
| 122 | M&L for preparation of plastered or unplastered old decorated surfaces of walls, ceiling incl pillasters and cornices etc., incl washing, rubbing down and stoping the connected previously treated surfaces and applying one coat of oil emulsion distemper (tint as approved by GE) including fillings of gaps, holes, patches with wall care putty on existing surface with sand paper or iron patti / flat wherever required, complete all as specified and directed. |
| 123 | M&L for preparation of plastered or unplastered old decorated surfaces of walls including pillasters and cornices etc. washing, rubbing down and stoping the connected previously treated surfaces and applying two coat of oil emulsion distemper (tint as approved by GE), fillings of gaps , holes, patches with wall care putty of existing surface with sand paper or iron patti / flat incl wherever required, complete all as specified and directed. |
| 124 | M&L for preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality), complete all as specified and directed. |
| 125 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality), complete all as specified and directed. |
| 126 | M&L for preparation of plastered or unplastered old decorated surfaces with sand papering of walls incl cornices etc. incl washing, rubbing down and stoping the connected previously treated surfaces and applying two coat of acrylic emulsion exterior quality (Apex painting) (tint as approved by GE), complete all as specified and directed. |
| 127 | Taking down carefully copper/aluminum point wiring (light, fan socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., removing materials to store for keeping in safe custody or for taking credit (credit for above items shall be made as per conditions separately) and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. |
| 128 | Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse or refixing the same, including provision of wires, etc at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) |
| 129 | Taking down carefully copper/aluminum point wiring (light, fan socket or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets etc to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. |
| 130 | M&L for point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed cable and including drawn through PVC casing – capping size of 25x32 mm wiring with all fittings and accessories, terminated to sunken box and laminated sheet of suitable size for housing/mounting the switches/sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light/fan point controlled by one, one way switch, complete all as specified and directed. |
| 131 | All as per Srl item No 130.00 above but for one Bell / Buzzer point controlled by one push switch on independent board, complete all as specified and directed. |
| 132 | All as per Srl item No 130.00 above but one 3 pin socket oulet 5 amps, on same board with other switches, complete all as specified and directed. |
| 133 | All as per Srl item No 130.00 above but one 3 pin socket oulet 5 amps, on independent board. |
| 134 | All as per Srl item No 130.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm wire complete all as specified and directed |
| 135 | All as per Srl item No 130.00 above but for one 3 pin 15 Amps power point on independent board with 4.0 Sqmm wire, complete all as specified and directed |
| 136 | All as per Srl item No 130.00 above but in existing concealed Conduit / casing capping complete all as specified and directed. |
| 137 | All as per Srl item No 136.00 above but one 3 pin socket oulet 5 amps, on same board with other switches, complete all as specified and directed |
| 138 | All as per Srl item No 136.00 above but one 3 pin socket oulet 5 amps, on independent board, complete all as specified and directed |
| 139 | All as per Srl item No 136.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm wire, complete all as specified and directed |
| 140 | S&F switch piano flush single pole, one way 5 Amp ( ISI marked) complete all as specified and directed. |
| 141 | S&F Bell push, flush type, 5 amp ( ISI marked) complete all as specified and directed. |
| 142 | S&F switch piano flush single pole, one way 15 Amp ( ISI marked) complete all as specified and directed. |
| 143 | S&F socket (ISI Marked) 2 in 1, 3 pin 5/6 amps flush type complete all as specified and directed. |
| 144 | S&F socket 2 in 1, 5 pin 5 and 15 amps (ISI marked) flush type universal complete all as specified and directed. |
| 145 | S&F in repair Modular switch 1 way 6 A, module, complete all as specified and directed |
| 146 | S&F in repair Modular switch 1 way 16 A, module, complete all as specified and directed |
| 147 | S&F in repair Modular Bell push 6 A, 1 Module, complete all as specified and directed |
| 148 | S&F in repair modular Socket, 6A, 2/3 pin combined 2 modules, complete all as specified and directed |
| 149 | S&F in repair modular Socket, 6A/16A, 2/3 pin combined 2 module, complete all as specified and directed |
| 150 | S&F in repair white cover plate with frame 2 Module, complete all as specified and directed |
| 151 | S&F in repair white cover plate with frame 4 Module, complete all as specified and directed |
| 152 | S&F in repair white cover plate with frame 8 Module, complete all as specified and directed |
| 153 | S&F for Metal flush box 2 module complete all as specified and directed. |
| 154 | S&F for Metal flush box 4 module complete all as specified and directed. |
| 155 | S&F for Metal flush box 6/8 module complete all as specified and directed. |
| 156 | S&F ceiling rose, 3 phase, PVC polycarbonate ,insulated body (ISI Marked) complete all as specified and directed. |
| 157 | S&F in repair Bell AC, 230 volts, complete all as specified and directed. |
| 158 | M&L for lamp holder (Angle) PVC/ Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. |
| 159 | S&F in replacement LED bulb 14 watt, complete all as specified and directed. |
| 160 | S&F LED tube light along with fixture, 1x 20 watt, (4 Feet) wall mounted LED battern, integrated electronic driver with heat sink provided for efficient heat dissipation, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and taking down existing fittings and all fixing arrangements, complete all as specified and directed. |
| 161 | Supply & fix LED tube light along with fixture, 1x 10 watt, (2 Feet) wall mounted LED battern, extrudedd PVC, heat shrink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. |
| 162 | S&F LED Bulkhead luminaire 20W Decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed. |
| 163 | S&F LED building securtiy light 40 watt fixed on wall with suitable bracket and all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements, complete all as specified and directed. |
| 164 | M&L for submain wiring with 2X6.0Sqmm + 1X6.0Sqmm Earth Wire single core PVC insulated FRLS-H PVC sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit 20mm dia as per site requirement and direction by EIC, with all accessories complete all as specified and directed. Note: Three runs of copper wire for phase, neutral, earth & one run with PVC conduit/ casing shall be measured one unit length. |
| 165 | All as per Srl item No 164.00 above but 2 run of single core 4 Sqmm FR PVC insulated unsheathed multistranded copper conductor cable and one run of 4.0 Sqmm FR PVC insulated unsheathed multistranded copper conductor earth wire, complete all as specified and directed |
| 166 | S&F sheet metal enclosure, MCB DB 12 way, SPN double door suitable for 240 Volt fixed flush on walls including cutting Knitch and making good disturbed surfaces, complete all as specified and directed |
| 167 | S&F sheet metal enclosure, MCB DB 8 way, SPN double door suitable for 240 V fixed flused on walls including cutting Knitch and making good disturbed surfaces, complete all as specified and directed |
| 168 | S&F sheet metal enclosures DB's 4 way SPN double door suitable for 240 V complete all as specified and directed. |
| 169 | S&F MCB SP (single pole) 06 to 32 Amps 'B' Curve with 10 kA for inductive load connected through cable lugs of suitable size complete all as specified and directed. |
| 170 | S&F MCB SPN/DP (single pole and neutral) 32/40 Amps 'B' Curve with 10 kA for inductive load connected through cable lugs of suitable size complete all as specified and directed. |
| 171 | S&F MCB SPN/DP (single pole & neutral) 240 volt 63 amp 'B' Curve with 10 kA for inductive load connected through cable lugs of suitable size complete all as specified and directed. |
| 172 | S&F MCB protected socket 15/20 Amp including 25 Amp MCB suitable for domestic and commercial uuse gyeser with PVC box, sheet steel enclosure (ISI marked) flush type complete all as specified and directed. |
| 173 | S&F in replacement electric water heater of capacity 25 litre, storage type steel body with copper inner tank and heating element upto 2 KW, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and fixing arrangements complete all as specified and directed. |
| 174 | S&F in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including fixing all arangements complete all as specified and directed. |
| 175 | S&F in replacement exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metal body with louvers including fixing all arangements complete all as specified and directed. |
| 176 | S&F in repair PVC conduit of 25mm dia complete all as specified & directed. |
| 177 | S&F in repair PVC casing capping of 25mm (1\\") width complete all as specified & directed |
| 178 | S&F in repair Single core PVC Insulated Copper stranded Conductor Cable 1100 V grade ISI marked of size 4.0 Sqmm complete all as specified & directed. |
| 179 | S&F in repair Single core PVC Insulated Copper stranded Conductor Cable 1100V grade ISI marked of size 6.0 Sqmm complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender