Tender For Special Repair To Toilet Block At 10 Assam Ilp Under Age B/R-Iv And Age E/M-Ii Of Ge (South ) Meerut Cantt
Tender Value
17.08 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
34200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Toilet Block At 10 Assam Ilp Under Age B/R-Iv And Age E/M-Ii Of Ge (South ) Meerut Cantt
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Aug-2026 | Ammendment to dates | Date | 17-Aug-2026 |
| 2 | 17-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | M&L for 25mm thick PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in sub base floor etc complete all as specified and directed. |
| 4 | M&L joint free Non Skid ceramic plain white tiles 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:4 complete all as specified and directed. ( screed bed shall not be measured and paid separately). |
| 5 | M&L glazed ceramic white tiles 600x300x 6 to7 mm thick/450x300x6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 6 | Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. |
| 7 | M&L rendering 15 mm thick in two layers Ist layer 10 mm thick in CM 1:6 and top layer 5 mm thick in CM 1:4 incl mixing of water proofing compond in top layer surfaces finished even and smooth without using extra cement upto 7m height, complete all as specified and directed.Note : Water proofing compound will be measured and will be paid seperately. |
| 8 | Supply only liquid water proofing compound. complete all as specified and directed. |
| 9 | Material & labour for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer complete all as specified & directed. |
| 10 | Complete removal of existance treatment of wall and applying a layer of 3mm thick wall care putty in two coat on wall and applying two coat of oil bond distemper complete all as specified and directed |
| 11 | S&F as in repair Vitreous China wash basin, with padestal white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed. |
| 12 | S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed. |
| 13 | S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed. |
| 14 | Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed. |
| 15 | Supply & fix in repair Vitreous China bowl urinal half stall white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 16 | Supply & fixing in repair brass chromium plated fancy type Urinal spreader incl connection with stainless steel pipe to urinal pot, complete all as specified and directed. |
| 17 | Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor. complete all as specified and directed. |
| 18 | S & F 15mm Chromium plated , fancy type, stop valves / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair approved by GE complete all as specified and directed. |
| 19 | S & F 15mm Bib taps, long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair approved by GE complete all as specified and directed. |
| 20 | S & F 15mm pillar taps, swan neck long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair approved by GE complete all as specified and directed. |
| 21 | Supply and fixing in repair Towel rail of brass chromium plated 600mm long with and including chromium plated brass screws wooden / plastic cleats approved by GE complete all as specified and directed. |
| 22 | S&F in repair CP SS soap dish complete all as specified and directed . |
| 23 | S&f in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 24 | Supply and fix glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed. |
| 25 | M&L ( in repairs) mirror 5.5mm thick of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers complete all as specified and directed. |
| 26 | Material &Labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth. complete all as specified and directed. |
| 27 | Taking up or down 20 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed |
| 28 | Supplying and laying of CPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings complete all as specified. complete all as specified and directed |
| 29 | S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm. complete all as specified and directed. |
| 30 | S & F in repair 32mm/40 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and urinal pots complete all as specified and directed. |
| 31 | S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. complete all as specified and directed. |
| 32 | S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.complete all as specified and directed. |
| 33 | S & F in repair 110mm bore PVC (SWR) bends With acces door any radius complete all as specified and directed. |
| 34 | S & F in repair 75mm bore PVC (SWR) bends with access door any radius complete all as specified and directed. |
| 35 | S & F in repair 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 36 | S & F I n repair 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 37 | Dismantling water tanks exc 250 n exc 500 ltr. capacity and removing to store complete all as specified and directed. |
| 38 | S&F Rotational moulded polyethylenewater storage tanks (cylindrical verticalwith closed top) hoisted and fixed in position all asspecified in SSR Part I of capacity 500 Ltrs complete all as specified and directed. |
| 39 | Supply & fix PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed. |
| 40 | S&F CPVC gate valves,with wheel head ,screwed both ends for CPVC pipe and fixed in repair for 20 mm pipe complete all as specified and directed. |
| 41 | Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 42 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ventilator, Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (including MS Hold Fast). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. |
| 43 | S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 44 | S & F 100 MM Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed. |
| 45 | S & F 150 mm long extruded brass, handle with mild steel bright polished handles, cast type (ISI marked) complete all as specified and directed. |
| 46 | S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 47 | S&F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed. |
| 48 | Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified and directed. |
| 49 | S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 50 | S&F Galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed. |
| 51 | S&F 3 mm thick, figured glass, pin head type ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq. m in each pane complete all as specified and directed. |
| 52 | M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified and directed. |
| 53 | M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, complete all as specified and directed. |
| 54 | M&L Rendering 15 mm thick rendering on roof surface including flashings and junction of parapets etc, finished even and smooth in cement mortar (1:4), using water proofing compound 200 ml each cement bag (50 Kg) after brushing cement slurry including Taking down cement plaster on top of roof slabs, RCC chajja, and projection etc including raking out joints, hacking for key scrubbing down with water etc and including removing & taking out of roof treatment membrane etc complete all as specified and directed. |
| 55 | Material & labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a tack coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed. |
| 56 | Supplied and fixed pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets including ridges in roof coverings complete all as specified and directed. |
| 57 | Supplied and fixed pre-painted plain galvanised coating GI based plain sheet 0.5mm thick of any colour as in roof covering / cladding / ridges, fixed with self tapping screws including dismantling complete all as specified and specified. |
| 58 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 59 | S & F MS work as in framed work for roof trusses purlin rafter fastning distance pieces cleats, wall anchor fastner etc (including fixing independently vertical post) conforming to (Fe- 410-W Gde E-250) complete all as specified and directed. |
| 60 | S&F MS flate iron as in wind ties for roof cutting tops to shape as directed, drilling holes flat iron fillets including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 61 | M&L Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bed in CM 1:6 including 75 mm PCC 1:4:8 for sub base complete all as specified and directed. |
| 62 | M&L 75 mm thick PCC 1:3:6 type C1 (20 mm graded stone aggs) as in plinth protection, path including finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 63 | Material and labour for brick work with burnt brick of straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 including demolition of brickwork complete all as specified & directed. |
| 64 | M&L for Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6), complete all as specified and directed. |
| 65 | Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, DBs, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces area. complete all as specified and directed. |
| 66 | Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 PVC insulated, unsheathed copper conductor cable in and including PVC surface conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes 1.2 mm thick including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3.0 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :- (a) One Tube light/bulb/security light point controlled by one, one way switch 05 / 06 Amps. |
| 67 | All as per item No 66.00 here-in-before but One exhaust fan point controlled by one, one way switch 05 / 06 Amps. |
| 68 | All as per item No 66.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. |
| 69 | All as per item No 66.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. |
| 70 | All as per item No 66.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. |
| 71 | Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed. |
| 72 | Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed. |
| 73 | Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed. |
| 74 | Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed. . |
| 75 | Supply and fix decorative LED Batten 20 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified and directed. |
| 76 | Supply and fixing lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 12 watt. complete all as specified and directed. |
| 77 | Supply and fix decorative LED Batten 10 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified and directed. |
| 78 | Supply & fixing of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified and directed. |
| 79 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 08 way, with 100 Amps rated complete all as specified and directed. |
| 80 | Supply & fixing MCB SPN, AC, 240 volts of 63 Amps, C curve, 10 kA, complete all as specified and directed. |
| 81 | Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA,complete all as specified and directed. |
| 82 | Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length. |
| 83 | Supply and fixing exhaust fan steel body AC single phase 230 V of size 300mm sweep with blade , frame and lauvers complete all as specified and directed. |
| 84 | Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including making connections complete with bracket fitting made out of GI pipe medium grade including clampsand nuts and bolts complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender