Tender For Comprehensive Repair To B/R Work At Dhq-01 And Cg Jetty Under Ge (I) Cg Porbandar.
Tender Value
20 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
1 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Porbandar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair To B/R Work At Dhq-01 And Cg Jetty Under Ge (I) Cg Porbandar.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-Aug-2026 |
| 2 | 07-Aug-2026 | 8214ADATECORRI1 | Date | 18-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' |
| 2 | Taking down chowkhat with shutters (without taking of shutters from the frames) of any description not exceeding 1.5 sqm in each panel, Complete all as specified and directed by Engineer-in-Charge. |
| 3 | Taking down chowkhat with shutters (without taking of shutters from the frames) of any description exceeding 1.5 sqm but not exceeding 4 sqm in each panel, Complete all as specified and directed by Engineer-in-Charge. |
| 4 | Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each, Complete all as specified and directed by Engineer-in-Charge. |
| 5 | Supply & Fixing 2nd class HW plain chowkhats and framed, rebated on the solid rounded or chamfered put together with glue pinned at joints, Complete all as specified and directed by Engineer-in-Charge. |
| 6 | Supply & Fixing 35mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. as specified in SSR Part I, Section 8, clause 8.20 (a), Complete all as specified and directed by Engineer-in-Charge. |
| 7 | Supply & Fixing 35mm thick Flush Shutter, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/ frame to match commercial type on both side, Complete all as specified and directed by Engineer-in-Charge. |
| 8 | Supply & Fixing Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial faces veneers supplied and fixed to chowkhats, Complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply & Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, Complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supply & Fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, Complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material & Labour for Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described applying one coat of pink primer and applying two coat of synthetic enamel paint, Complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply & Fixing Mild steel, 300mm, Brass ordinary rat tail rod pattern springs including roller and roller plate, Complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply & Fixing 125mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22, Complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply & Fixing 150mm long Extruded Aluminium alloy handles, fabricated type, anodised, Complete all as specified and directed by Engineer-in-Charge. |
| 15 | Supply & Fixing 150mm long Aluminium, anodised, barrel tower bolts of extruded section, Complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply & Fixing 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, Complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply & Fixing in repair mild steel, 300mm, Brass ordinary rat tail rod pattern springs including roller and roller plate, Complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply & Fixing in repair 125mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22, Complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply & Fixing in repair 150mm long Extruded Aluminium alloy handles, fabricated type, anodised, Complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply & Fixing in repair 150mm long Aluminium, anodised, barrel tower bolts of extruded section, Complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply & Fixing in repair 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, Complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material and labour for 18mm thick Marine plywood, grade BWP, type BB with both side 0.9mm thick decorative choice laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction, fixed with screws to timber frame work including 1st class HW lipping alround the shutter/edges and polishing etc., Complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material and labour for 0.9mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's instructions, Complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply & Fixing in repair door closer of cast iron body, hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701mm to 850mm wide and of weight between 36 to 60 kg, ISI marked, Complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply & Fixing Hasp and staple for 100mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, Complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supply & Fixing in repair Hasp and staple for 100mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, Complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply & Fixing 140mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door, Complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply & Fixing in repair 140mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door, Complete all as specified and directed by Engineer-in-Charge. |
| 29 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete, aluminium or brick surrounds, glazed with putty or fixed with beads, Complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply & Fixing 4mm thick Figured glass, pin headed type and glazing with/ without oil putty in squares not exceeding 0.5 Sqm in each pane in metal or aluminium window, Complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply & Fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium/pvc sections, Complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply & Fixing in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium/pvc sections, Complete all as specified and directed by Engineer-in-Charge. |
| 33 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, Complete all as specified and directed by Engineer-in-Charge. |
| 34 | Material & Labour for 10mm thick vitrified tile of area exceeding not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15mm thick Cement Mortar 1:6, Complete all as specified and directed by Engineer-in-Charge. |
| 35 | Material & Labour for 10mm thick vitrified tile of area exceeding not exceeding 0.36 sqm in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement mortar 15mm thick 1:4, Complete all as specified and directed by Engineer-in-Charge. |
| 36 | Material & Labour for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile not exceeding 0.11 sqm in floors, over and including 15mm thick screed in Cement Mortar (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match, Complete all as specified and directed by Engineer-in-Charge. |
| 37 | Material & Labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm cement plaster in 1:4 Cement Mortar, Complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply & Fixing PVC Floor trap 75mm bore with grating including jointing using solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4), Complete all as specified and directed by Engineer-in-Charge. |
| 39 | Taking down eaves gutter or RWP of any description Including fittings, Complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply & Fixing 110mm dia PVC rain water pipe of pressure single socketed with rubber joint, jointed with solvent joint fixed to wall with stack clamp, Complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply & Fixing 110mm dia PVC band any radius, Complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply & Fixing PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in trenches, Complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply & Fixing PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches, Complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply & Fixing PVC (SWR) bends 110mm bore with/without access door any radius, Complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply & Fixing PVC (SWR) bends 75mm bore with/without access door any radius, Complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply & Fixing PVC (SWR) single junction 'T' 75mm bore with access door any radius, Complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply & Fixing PVC (SWR) single junction 'T' 110mm bore with access door any radius, Complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply & Fixing in repair Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays for 75mm pipe, including bolts and nuts and securing ends of stays to wall or roof, Complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply & Fixing in repair Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays for 100mm pipe, including bolts and nuts and securing ends of stays to wall or roof, Complete all as specified and directed by Engineer-in-Charge. |
| 50 | Taking up or down for 20mm bore steel water tubing galvanised with connection, Complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supplying and laying of 20mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors, Complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply & Fixing Brass Elbow for special fitting of 16mm bore CPVC pipe, Complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply & Fixing Brass Tee for special fitting of 16mm bore CPVC pipe, Complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply & Fixing Male Brass threaded Adaptor Tee for special fitting of 16mm bore CPVC pipe, Complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply & Fixing in repair 15mm bib tap (fancy type), cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, Complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply & Fixing in repair Central Hole Basin Mixer with Popup waste system, Complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and fixing Wall Mixer 2 in 1 with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges, Complete all as specified and directed by Engineer-in-Charge. |
| 58 | Supply & Fixing in repairs brass CP shower rose 125mm size fancy type with swivel joint any size including fixing to steel pipe/union for 15mm dia., Complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply & Fixing In repair Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm, Complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply & Fixing In repair Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25mm, Complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply & Fixing in repair Pillar taps, 15mm dia, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe, Complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply & Fixing PVC connection of 15mm dia length 600mm, Complete all as specified and directed by Engineer-in-Charge. |
| 63 | Supply & Fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover, connection to trap, flushing pipe & anti-syphonage pipe etc., including necessary materials for fittings & making good to floor, Complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply & Fixing in repairs 10 Ltrs. Capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets slim line or equivalent make / model with all accessories, Complete all as specified and directed by Engineer-in-Charge. |
| 65 | Supply & Fixing in repair (Syphon internal fitting) of PVC low level flushing cistern as per existing pattern to make the PVC low level flushing cistern fully functional, Complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply & Fixing in repair (Syphon internal fitting) of single piece EWC flushing cistern as per existing pattern to make the flushing cistern fully functional, Complete all as specified and directed by Engineer-in-Charge. |
| 67 | Supply & Fixing for in repair Vitreous China ware wash hand basin white, oval type, size 550mm x 400mm size with cutting for and pinning ends of brackets or erecting stand including chromium plated 15mm pillar cock, PVC connection 450mm long, CP waste coupling, 32mm dia PVC pipe, Complete all as specified and directed by Engineer-in-Charge. |
| 68 | Supply only Bevelled edge mirror, 600mm x 450mm of selected quality glass, mounted on 6mm thick or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs, Complete all as specified and directed by Engineer-in-Charge. |
| 69 | Supply & Fixing in repair 20mm Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges, and Complete all as specified and directed by Engineer-in-Charge. |
| 70 | Supply & Fixing in repair pvc cabinet mirror of size 450mm x 600mm, Complete all as specified and directed by Engineer-in-Charge. |
| 71 | Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, Complete all as specified and directed by Engineer-in-Charge. |
| 72 | Supply & Fixing in repair 15mm bore stop valves/ Angle valve, cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, Complete all as specified and directed by Engineer-in-Charge. |
| 73 | Supply & Fixing in repair 15mm dia CP two way angle valve fixed in pipe, Complete all as specified and directed by Engineer-in-Charge. |
| 74 | Supply & Fixing in repair 20mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, Complete all as specified and directed by Engineer-in-Charge. |
| 75 | Supply & Fixing in repair Stop valves/Angle valves of size 15mm dia fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, Complete all as specified and directed by Engineer-in-Charge. |
| 76 | Supply & Fixing in repair 15mm bore brass spindle of best quality suitable for bib tap and stop cock to make the bib tap and stop cock fully functional, Complete all as specified and directed by Engineer-in-Charge. |
| 77 | Supply & Fixing in repair 15mm bore rubber washer of best quality suitable for bib tap and stop cock, Complete all as specified and directed by Engineer-in-Charge. |
| 78 | Supply & Fixing in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboutery with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm 330 mm x 160mm, Complete all as specified and directed by Engineer-in-Charge. |
| 79 | Supply & Fixing in repair Harrison rails stainless steel (Curtain rod/drapery rod), 20mm dia, fancy type bracket 2 Nos of each opening and side stopper fancy type required shape and size 2 Nos of each opening, Complete all as specified and directed by Engineer-in-Charge. |
| 80 | Supply & Fixing in repair Plate racks made out of 1mm thick, Stainless steel, of size 750mm x 600mm x 250mm, Complete all as specified and directed by Engineer-in-Charge. |
| 81 | Supply & Fixing in repair 32mm dia and 900mm long PVC waste pipe suitable for sink, WHB and urinal, Complete all as specified and directed by Engineer-in-Charge. |
| 82 | Supply & Fixing in repair waste coupling of 32mm dia brass CP for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end, Complete all as specified and directed by Engineer-in-Charge. |
| 83 | Supply & Fixing in repair waste coupling of 40mm dia brass CP for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end, Complete all as specified and directed by Engineer-in-Charge. |
| 84 | Supply & Fixing in repairs Plastic water closet seat, any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, Complete all as specified and directed by Engineer-in-Charge. |
| 85 | Dismantling water tanks of capacity of exc. 500 litre but not exc. 1000 Litres and removing to store, Complete all as specified and directed by Engineer-in-Charge. |
| 86 | Supply & Fixing 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position, Complete all as specified and directed by Engineer-in-Charge. |
| 87 | Supply & Fixing 750 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position, Complete all as specified and directed by Engineer-in-Charge. |
| 88 | Dismantling water tanks of capacity of exc. 250 litre but not exc. 500 Litres removing to store, Complete all as specified and directed by Engineer-in-Charge. |
| 89 | Supply & Fixing 500Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position, Complete all as specified and directed by Engineer-in-Charge. |
| 90 | Dismantling water tanks of capacity of exc. 1000 litre but not exc. 2000 litres removing to store, Complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply & Fixing 2000Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position, Complete all as specified and directed by Engineer-in-Charge. |
| 92 | Material & Labour for preparation of old surface of wall and applying one coats of oil bound distemper including filling undulation with wall care putty as per manufacture instruction with smooth roller finish, Complete all as specified and directed by Engineer-in-Charge.Note: - After painting, cleaning of all floors, glass & furniture by own arrangement. |
| 93 | Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish two coats as per manufacture instruction with smooth roller finish, Complete all as specified and directed by Engineer-in-Charge.Note: - After painting, cleaning of all floors, glass & furniture by own arrangement. |
| 94 | Material & Labour for preparing surfaces plastered or un-plastered old surface of ceiling applying one coat of oil bound distemper as per manufacture instruction with smooth roller finish, Complete all as specified and directed by Engineer-in-Charge.Note:- After painting, cleaning of all floors, glass & furniture by own arrangement. |
| 95 | Material & Labour for preparation of old decorated surfaces of walls by scrapping old paint with steel wire brush, wash the surface thoroughly and applying one coats of acrylic emulsion exterior grade after filling all undulation/ crack with wall care putty including necessary steel scaffolding + green cloth all-round the work side for any position/height, Complete all as specified and directed by Engineer-in-Charge. (For bldg upto GF to four Floor). Note:-Necessary safety precautions need to be taken by contractor before applying paint. |
| 96 | Material & Labour for preparation of old painted wood or wood based surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint etc., Complete all as specified and directed by Engineer-in-Charge. |
| 97 | Material & Labour for preparation of old painted wood or wood based surfaces of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint etc., over a coat of pink primer, Complete all as specified and directed by Engineer-in-Charge. |
| 98 | Material & Labour for Preparation of old painted steel based surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint etc., Complete all as specified and directed by Engineer-in-Charge. |
| 99 | Material & Labour for complete removal of old painted steel based surfaces of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of Red oxide primer etc., Complete all as specified and directed by Engineer-in-Charge. |
| 100 | Taking down cement plaster on stone wall including racking out joints, hacking for key scrubbing with water etc., Complete all as specified and directed by Engineer-in-Charge. |
| 101 | Material & Labour for rendering 5mm thick on ceiling concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement, Complete all as specified and directed by Engineer-in-Charge. |
| 102 | Material & Labour for preparing surfaces plastered or un-plastered new surface of ceiling applying two coats of oil bound distemper over a coat of primer two coats as per manufacture instruction with smooth roller finish, Complete all as specified and directed by Engineer-in-Charge.Note: - After painting, cleaning of all floors, glass & furniture by own arrangement. |
| 103 | Material & Labour for 15mm thick plastering in cement & sand mortar 1:4 on fair faces of stone work, finished even and smooth (w/o using extra cement), including all necessary scaffolding etc., Complete all as specified and directed by Engineer-in-Charge. |
| 104 | Material & Labour for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturer’s instructions, Complete all as specified and directed by Engineer-in-Charge. |
| 105 | Material & Labour for 15mm thick rendering in Cement Mortar 1:6 to stone surfaces trowelled to even & smooth w/o using extra cement, Complete all as specified and directed by Engineer-in-Charge. |
| 106 | Material & Labour for preparing surfaces plastered or un-plastered new surface of walls applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish as per manufacture instruction with smooth roller finish, Complete all as specified and directed by Engineer-in-Charge. Note: - After painting, cleaning of all floors, glass & furniture by own arrangement. |
| 107 | Supply only liquid water proofing compound, complete all as specified and directed by Engineer in charge. |
| 108 | Material and labour for powder coated Aluminium Anodised frame (minimum thickness of powder coating 50 micron) for door, sliding windows & ventilators with one or more rebates including joining cleats for fixing etc., Complete all as specified and directed by Engineer-in-Charge. |
| 109 | Material and labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings, Complete all as specified and directed by Engineer-in-Charge. |
| 110 | Supply & Fixing in repair Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 111 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc., Complete all as specified and directed by Engineer-in-Charge. |
| 112 | Material & Labour for granite (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including, grinding, polishing, moulding the edges and polishing and including over screed bed 20mm thick in cement mortar 1:6, Complete all as specified and directed by Engineer-in-Charge. |
| 113 | Material & Labour for screed bed 20mm thick in cement mortar 1:6, Complete all as specified and directed by Engineer-in-Charge. |
| 114 | Material & Labour for 20 to 25mm thick machine cut Kota stone (single piece of required size for steps) flooring over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and Mirror polishing complete all as specified over and including 15mm thick screed bed in Cement Mortar 1:4, Complete all as specified and directed by Engineer-in-Charge. Note: - Kota stone in S /case should be provided in single piece upto 1.5 m length or as per site requirements complete all as specified and as directed by Engineer-in-Charge. |
| 115 | ditto - all as above but kota stone slab (100/150mm x 550mm) and 20-25mm thick in riser of steps, skirting, dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed, Complete all as specified and directed by Engineer-in-Charge.Note:- Kota stone in S /case should be provided in single piece upto 1.5 m length |
| 116 | Taking down for repair 10mm/12 mm thick toughened glass doors, partitions and re-fixing the same opening after repair including re-placing the hydraulic floor door spring upto 80 Kg, replacing hydraulic spring for door weight upto 80 Kg, Complete all as specified and directed by Engineer-in-Charge. |
| 117 | Dismantling/ Demolition of brick work or stone masonry in cement mortar including all quoins, arches, pillars, etc., Complete all as specified and directed by Engineer-in-Charge. |
| 118 | Material & Labour for Porbandar stone masonry, well bonded, bedded and solidly hearted built in Cement Mortar 1:6, Complete all as specified and directed by Engineer-in-Charge. |
| 119 | Supply & Fixing in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms), Complete all as specified and directed by Engineer-in-Charge. |
| 120 | Supply & Fixing in repair Plastic cover lid only for PVC water storage tank of capacity exc. 250 Ltrs but not exc. 500 Ltrs (sample as approved by EIC) complete with locking arrangement with or without hinges, Complete all as specified and directed by Engineer-in-Charge. |
| 121 | Supply & Fixing in repair Plastic cover lid only for PVC water storage tank of capacity exc. 500 Ltrs but not exc. 2000 Ltrs (sample as approved by EIC) complete with locking arrangement with or without hinges, Complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 day
Aug 18, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender