Tender For Restoration Of Rain Damages Of Lwss Nand In Tehsil Ramshehar, District Solan (Hp) (Sub Head:- Construction Of Reinforced Cement Concrete Storage Tank 70000 Ltrs Capacity In Village Lunas).
Tender Value
7.60 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
6 days left
EMD
15202
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Of Lwss Nand In Tehsil Ramshehar, District Solan (Hp) (Sub Head:- Construction Of Reinforced Cement Concrete Storage Tank 70000 Ltrs Capacity In Village Lunas).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation & trenches etc. in in earth work lift up to 1.5 meter stacking the excavated soil not more than 3 meters clear from the edge of excavaton and then returning the stacked soil in 15cm layers when required into plinths, side of foundation etc. Consolidating each deposited layers by remming and watering and then disposing of all surplus excavated earth as direction within a lead of 20 mtr in pick work. |
| 2 | Providing and laying cement concrete 1:3:6(1cement:3approved sand: 6approved quarry stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. |
| 3 | Providing and laying Cement concrete work 1:1.5:3 (1 cement :1.5 sand :3 water borne aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 4 | Foundation, footing, bases of columns and the like & mass concrete. |
| 5 | Wall (any thickness) butt not less than 0.10 mtrs. Thickness) attached pillasters, buttresses plinth and string courses etc. from top of found , level upto floor two level. |
| 6 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in, including all leads , lifts for insitu-reinforced concrete and plain concrete work in, i/c al leads ,lifts and carriage of material at site and as directed by the Engineer-in-Charge. |
| 7 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like. |
| 8 | Prov.form work of ordinary timber plankings so as to give a rough finish i/c centring,shuttering,strutting & propping etc. ht.of prop-ping & centring below supporting floor to ceiling not exceeding 4 mts. & removal of the same for insitu-reinforced concrete & plain concrete work in :- |
| 9 | Arches beyond 6.00 mts.span |
| 10 | Providing and laying Cement concrete work 1:1.5:3 (1 cement :1.5 sand :3 water borne aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced for RCC work in:- |
| 11 | Suspended floors,roofs, landing & shelves & their support balconies, beams, girders, bressumers & cantilever upto floor two level. |
| 12 | Arches upto floor two level. |
| 13 | Providing and fixing tor steel reinforcement for RCC work i/c bending, binding and placing in position complete i/c carriage of material within all leads and lifts. |
| 14 | Steel work welded in built up section, Trusses and framed work i/c cutting hoisting fixing in position and applying a priming coat of red lead paint in grating framed guard bars,ladders,railing,bracket and similar work. Complete in all respect. |
| 15 | Laying Jointing and testing of GMS pipe (light grade) of following dia (earth work to be measured and paid for seprately). |
| 16 | 150mm dia |
| 17 | 80mm dia |
| 18 | Providing and fixing CI sluice valves(with hand wheels) as per IS : 780 class up to 300 mm dia (including brass spindle and as per IS:2906 class II for diameter more than 300 m complete with nuts, bolts rubber insertion etc) the tail pieces if required shall be measured and paid separately of following dia Kirloskar/ Leader make PN-1.6 complete in all respect. |
| 19 | 150 mm dia |
| 20 | 80 mm dia |
| 21 | Supplying & Fixing of main hole cover (size 680x680) with MS sheet 2.00 mm thick with hinges on MS angle iron frame 35x35x3 mm supporting with 40x5 mm MS flat with base frame 40x40x5 mm duly welded and fixed in RCC slab with anchor bolt 12 mmx150 mm i/c cost of welding charges, carriage fixing and applying priming coat and locking arrangement complete in all respect as per entired satisfiction of engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender