Tender For Provn Of Storm Water Drain Near Def Civilian Accn, Near Aps Basistha, Provn Of New Drainage Main Gate 88 To New Airport Road, Soake Well And Septic Tank At Sadilapur And Provn Of Exhaust Fan For Various Bldg Of Adhoc Transit C Sadilapur Un
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Aug 2026
16 days left
EMD
89600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Storm Water Drain Near Def Civilian Accn, Near Aps Basistha, Provn Of New Drainage Main Gate 88 To New Airport Road, Soake Well And Septic Tank At Sadilapur And Provn Of Exhaust Fan For Various Bldg Of Adhoc Transit C Sadilapur Under Ge Guwahati
BOQ
| Sl. No. | Item Description |
| 1 | Excavation over areas n. exc 1.5 mtr deep and getting out soft/loose soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 3 | Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified. |
| 4 | M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete as specified and directed. |
| 5 | M&L for Brickwork with subclass ‘B’ bricks straight or curved on plan to any radius in half brick wall, built in CM 1:4 complete all as specified and as directed. |
| 6 | M&L for 15mm thick rendering with cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls and finishing the surface even and fair without using extra cement complete all as specified and as directed. |
| 7 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 8 | M&L for cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate and finishing with cement sand mortar 1:4 as in benching to manholes/drain surface complete all as specified and directed. |
| 9 | M&L for cement concrete (1:2:4) type B0 using 12.50mm graded stone aggregate as in coping including weathering, slightly rounded or chamfered angles and throating and including necessary form work cement complete all as specified and directed. |
| 10 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished surfaces of concrete flat complete all as specified and as directed |
| 11 | M&L for RCC (nominal mix) in (1:2:4) type B1 using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item |
| 12 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 13 | M&L for mild steel TMT bars 5mm dia and over upto including 10mm dia as in stirrups, spacers and binders cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia, complete, all as specified and directed. |
| 14 | S&F Mild steel framed work such as grills,gratings,etc.with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bars, barred iron doors,ladders, framed balusters, walk ways,railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 15 | M&L for preparing new or previously untreated steel surfaces of any description, not otherwise describe not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 16 | M&L formwork to fair finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified. |
| 17 | M&L formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofsetc not exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for rough finished surfaces complete all as specified. |
| 18 | M&L for reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, shelves and the like complete all as specified and as directed.Note :- Reinforcement & formwork shall be measured and paid for separately. |
| 19 | M&L for precast RCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in lcover slabs including necessary form work and set in CM (1:4) complete all as specified and as directed.Note :- Reinforcement shall be measured and paid for separately. |
| 20 | M&L for 100mm PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in paving finish even and smooth without using extra cement at road cutting/ footpath complete all as specified and as directed. |
| 21 | M&L for machine pressed cement concrete, coloured tiles of size 250 x 250 x 22 mm thick with grey cement and pigment and pointed in neat cement slurry in floors to matching with coloured of tiles, over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 22 | M&L for 75mm PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection, finish even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed. Note :- Measurment shall be taken only for inner girth. |
| 24 | Add to (or deduct from) serial item No. here-in-above for each 25mm girth or part thereof over or under 30cm inner girth. |
| 25 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc not exceeding 10sq.m on plan getting out in soft soil complete all as specified and as directed. |
| 26 | M&L for 15mm thick rendering with cement mortar (1:4) on fair faces of brick work in two layers (10mm & 5mm) seperately mixed with water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and fair without using extra cement complete all as specified and as directed.Note:- WPC shall be measured and paid seperately under appropiate item. |
| 27 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 28 | M&L for hardcore broken stone or boulders hard core of gauge n.exc. 63 mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed. |
| 29 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete after demolition of existing concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 30 | M&L for Mild steel TMT bars 6 to 8mm dia, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed. |
| 31 | M&L for machine pressed precast concrete interlocking paver block glazed colour with grey cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid over 50mm thick sand bed layer complete all as specified and as directed. (Note:-Bedding layer of sand will be measured and paid separately) |
| 32 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 33 | M&L for providing 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in sub base of floor and path finishing the surface even and fair complete all as specified and as directed. |
| 34 | M&L for providing 100mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in sub base of floor and path finishing the surface even and fair complete all as specified and as directed. |
| 35 | Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc rough finished surface of concrete complete all as specified and directed. |
| 36 | M&L for prepolished chequered cement concrete, coloured tiles, textured finished of size 250 x 250 x 25 mm thick / 300x300xx25mm set jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 37 | Excavating in trenches. n exc 1.5 m wide and depth exc 1.5m and not exc 3m, for foundation, etc n exc 10 sq m on plan and getting out soft/loose soil complete all as specified and as directed. |
| 38 | Excavation over areas exc 1.5 mtr deep and not execeeding 3.0m deep and getting out soft/loose soil complete all as specified and directed. |
| 39 | Excavation over areas exc 3.0 mtr deep and not execeeding 4.50m deep and getting out soft/loose soil complete all as specified and directed. |
| 40 | M&L for brickwork with subclass ‘B’ bricks straight or curved on plan not exceeding 6m mean radius, built in CM 1:4 complete all as specified and as directed. |
| 41 | M&L for Brickwork with sub class ‘B’ bricks in half brick thick honey comb walling, built in CM 1:4 complete as specified and directed. |
| 42 | M&L for preparing of new treated plastered surfaces of wall and applying two coats of white wash complete all as directed. |
| 43 | S&F PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 44 | S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 45 | M&L for precast cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate) as in precast wall etc etc. and setting in mortar complete with joints to match, set in CM 1:4 complete all as specified & as directed. |
| 46 | M&L for loose filling with broken bricks n.exe 63mm complete all as specified and directed. |
| 47 | M&L for 25 mm thick cement concrete type B-0,1:2:4 using 12.5mm graded stone aggregate, finished ement concrete surface even and smooth without using extra cement complete all as per specified and directed |
| 48 | S&F 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 49 | M&L for concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested in PCC (1:3:6), type C-2, using 40mm graded stone aggregate for 150mm dia pipes complete all as specified and as directed. |
| 50 | S&F salt glazed stone ware drain pipes of 150mm bore, grade `A', ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified and as directed. |
| 51 | S&F salt glazed stone ware drain pipes of 200mm bore, grade `A', ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified and as directed. |
| 52 | M&L for concealed point wiring using approved colour coding (Red, Black and green for single phase circuits) complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade, IS-694 marked with valid CML No. and including drawn through non metallic rigid PVC Concealed conduit medium grade minimum 20 mm dia ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) and conduit accessories fixed on recesses of wall/ceiling/roof and chisselling on wall complete including PVC insulated multi-starnded copper conductor 1.5 Sqmm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complete for the following complete all as specified and as directed:- |
| 53 | One light/ Fan controlled by one no one way switch complete all as specified and as directed. |
| 54 | Supply and fixing switch piano flush type one way 5/6 Amp, 230 Volts complete all as specified and as directed. |
| 55 | Supply and fixing ceiling rose surface bakelite two to three terminal 65 x 50 mm three terminal 250/230 volts ISI marked complete all as specified and as directed. |
| 56 | M&L for cutting circular hole at any type of wall of suitable for fixing exhaust fan of size 300mm/ 450mm sweep, grouting 04 nos 100mm long 12mm dia stud bolt including making good to disturbed surfaces of wall to match as per existing colour complete all as specified and as directed. |
| 57 | Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with blades and frame and louvers and making good to disturbed surface complete all as specified and as directed. |
| 58 | Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 450m sweep with blades and frame and louvers and making good to disturbed surface complete all as specified and as directed. |
| 59 | S&F MCB SPN distribution board in sheet steel enclosure GLAZED DOOR, 8 ways, 240 Volts IP 43 protection, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09, fix with concealed wall including making good wall surface by plastering with suitable ratio of cement sand plater and civil work etc complete all as specified and as directed. |
| 60 | S&F MCB, SPN, 240 volts, 'C' Curve, 32 Amps, 10 KA, confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and as directed. |
| 61 | S&F MCB, SP, 240 volts, 'C' Curve, 06 to 32 Amps, 10 KA, confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and as directed. |
| 62 | M&L for sub main wiring with 4 Sqmm (nominal area) with two runss (Red for phase and black for neutral) of single core FRLSH PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including PVC regid concealed conduit/ PVC casing N Caping of adequate size but not less than 25mm dia & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including single core 4 Sqmm (nominal area) single core PVC insulated & unsheathed FRLS copper conductor green in colour duly connected to earth wire complete complete all as specified and as directed.. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length. |
| 63 | S&F LED Building security light fitting 35/36 watt in aluminium PDC housing, toughened glass cover, individual LEDs with secondary optics, covered with IP66 protection with inbuilt surge protection of minimum 5KV and repair/replacement warranty of minimum 3 years with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 64 | M&L for 40mm bore light grade GI pipe fixed as bracket, on wall any type, not less than 1.5 m long and bent to shape as required complete with sutiable clamp made out of 25x4mm Flat iron duly fixed 12mm dia nuts, bolts, washers etc fixed to pole complete with two coats of aluminium paint over a coat of red oxide complete all as specified and as directed |
| 65 | M&L for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1 (using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar, funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary excavation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender