Tender For Provn Of Rain Water Harvesting Pits To Recharge Ground Water At Arty Centre, Md Lines And Asif Nagar Area And Provn Of Toilet Block At Single Living Jcos Accn At Arty Centre Under Ge Golconda
Tender Value
36.28 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
73000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Rain Water Harvesting Pits To Recharge Ground Water At Arty Centre, Md Lines And Asif Nagar Area And Provn Of Toilet Block At Single Living Jcos Accn At Arty Centre Under Ge Golconda
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8975/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: PROVN OF RAIN WATER HARVESTING PITS TO RECHARGE GROUND WATER AT ARTY CENTRE, MD LINES AND ASIF NAGAR AREA AND PROVN OF TOILET BLOCK AT SINGLE LIVING JCOS ACCN AT ARTY CENTRE UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Earth work in excavation of all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) n.exc. 1.50 m depth including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed. |
| 3 | Earth work in excavation of ordinary rock by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) n.exc. 1.50 m depth including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed. |
| 4 | Earth work in excavation of ordinary rock by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) depth exc 1.50m but not exc 3.00m including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed. |
| 5 | Earth work in excavation of ordinary rock by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) depth exc 3.00m but not exc 4.50m including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed. |
| 6 | Returning filling in including spreading, levelling watering and well ramming in layers n exc 25cm, complete all as specified and directed. |
| 7 | Removing excavated soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed. |
| 8 | M&L brick work with fly ash bricks, old size straight or curved on plan not exceeding 6.00 metre mean radius, built in cement mortar (1:4) including corbelling and arches where shown on drawings, complete all as specified. |
| 9 | M & L TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for columns hooking ends binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed. |
| 10 | M&L mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required, including cranking, bending spirally for stirrups and binding with and including mild steel wire (annealed) not less than 0.9mm dia. complete all as specified and as directed. |
| 11 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 12 | M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs exc. 10 cm but n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar works for rough finished surfaces of concrete, complete all as specified and as directed. |
| 13 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter complete all as specified and directed. |
| 14 | M&L reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 15 | M&L reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed. |
| 16 | M&L reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 17 | M&L PCC (1:5:10) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed. |
| 18 | M&L 15mm thick cement plaster in cement mortar (1:4) to brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 20 | M&L for trial bore in normal available strata (size 200mm and above) upto 50mtr depth, complete all as specified and as directed. |
| 21 | M&L for trial bore in normal available strata (size 200mm and above) exc 50 mtr but not exc 75mtr depth complete all as specified and directed. |
| 22 | M&L Reinforced concrete pipes, 300mm bore, class NP3, laid and jointed complete with collars complete all as specified and directed. |
| 23 | S&F PVC (SWR) pipe 150mm dia slotted/perforated 1st quality single socketed in any length with rubber ring joint including all necessary fitting laid in trenches or in floors complete all as specified and directed. |
| 24 | M&L for filling coarse sand in trenches laid in layers, complete all as specified and directed. |
| 25 | M&L for gravel packing including jute as filter media 4mm to 6mm size around the PVC pipe complete all as specified and directed. |
| 26 | M&L for filling of gravel in trenches of size 6mm to 10mm, complete all as specified and directed. |
| 27 | M&L for filling of gravel in trenches of size 2mm to 4mm, complete all as specified and directed. |
| 28 | S & F of MS Jali for Filtration of water and allow to move along the bore complete all as specified and directed. |
| 29 | Excavating over areas, n exc 1.5 m deep and getting out soft/ loose soil, complete all as specified and as directed. |
| 30 | Excavating over areas, exc 1.5m deep and n exc 3 m deep and getting out hard/dense soil, complete all as specified and as directed. |
| 31 | Excavating over areas, exc 3m deep and n exc 4.5 m deep and getting out hard/dense soil, complete all as specified and as directed. |
| 32 | Excavating over areas, exc 4.5m deep and getting out hard/dense soil, complete all as specified and as directed. |
| 33 | M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete, complete all as specified and as directed. |
| 34 | S&F 200mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed. |
| 35 | M & L for Providing cement concrete in copings type C1 built in 1:3:6 complete all as specified and as directed. |
| 36 | M&L Boring/drilling All types of soil/ Rocky strata including Boulders bore well of required dia for 150mm casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level, complete all as specified and as directed. |
| 37 | Supplying, assembling, lowering and fixing in vertical position in bore well 150mm unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge, complete all as specified and as directed. |
| 38 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, , complete all as specified and as directed. |
| 39 | S&F Stainer (wire mesh) framed in angle iron and rungs for Sump necessary welding to purlins or other connecting plate of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed. |
| 40 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm getting out soft/loose soil, complete all as specified and as directed. |
| 41 | M&L mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, matching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc an similar work complete all as specified and directed. |
| 42 | M&L mild steel deformed bars 10mm dia and over cut to length, bent to shape required including ranking etc confirming to Fe-405 or Fe-410.0 complete all as specified and directed. |
| 43 | Supply only MS chain link fencing, any size or type complete all as specified and directed. |
| 44 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of straights, rails strading bolts etc including provision of binding wire complete all as specified and directed. |
| 45 | S&F MS bolts, screw (machine made( with hexagonal or spare head one end and screwed the other, or screwed bolts ends, each screwed end to be fitted with washer and one hexagonal or squaremeter 5 cm long complete all as specified and directed. |
| 46 | S&F Galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, including securing or tying at crossing etc, complete all as specified and as directed. |
| 47 | M&L two coats of synthetic enamel paint over a coat of redoxide primer including preparation of any description over 10cm width or girth complete all as specified and directed. |
| 48 | Formwork to sides of concrete foundation, footings, bases of columns, rafts & rafts beams, sides & soffits (if any) of foundation & plinth beams; & similar work; vertical or to batter, complete all as specified and as directed. |
| 49 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and as directed. |
| 50 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed. |
| 51 | RCC M-25 (20mm graded aggregates) Design mix for Columns, pillars, piers, posts and struts etc, complete all as specified and as directed. |
| 52 | RCC M-25 (20mm graded aggregates) Design mix for Beams, cantilevers, bressummers, lintels over 1.5m span etc, complete all as specified and as directed. |
| 53 | Hardcore of gauge exc 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface, complete all as specified and as directed. |
| 54 | Material and labour PCC 1:3:6 75mm thick C2 type (using 40mm graded aggregate) as in plinth protection/hard standing finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 55 | Material and labour 75mm thick for PCC 1:4:8 Type D2 using 40mm graded aggregate in sub base floor, fillings & mass concrete complete all as specified and as directed. |
| 56 | Material and labour 22mm thick for PCC 1:2:4 Type B0 using 12.50mm graded aggregate in sub base floor, fillings & mass concrete complete all as specified and as directed. |
| 57 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm, in floors etc, and cement screed in CM 1:6, 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 58 | M & L for glazed coloured ceramic tiles in vertical surfaces of size 450mmx300mmx7mm thick laid over 10mm thick back coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, complete all as specified and directed. |
| 59 | M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed. |
| 60 | M&L 10mm thick cement plaster in cement mortar (1:6) to brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 61 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in two coats first coat 10mm thick in CM 1: 6 and second coat 5mm thick in CM1:4 mixing with water proofing compound on top layer at the rate of 2% weight of cement or as per manufacturers instructions complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately. |
| 62 | Supply only Integral waterproofing compound complete all as specified and as directed. |
| 63 | Material and labour for rendering 5mm thick on fair faces of brick work or concrete surfaces in CM 1:3 ceiling surfaces complete all as specified and as directed. |
| 64 | Material and labour for preparation of new plastered surfaces applying two coats of colour wash on internal and external wall surfaces complete all as specified and as directed. |
| 65 | M&L for preparation of new ceiling surfaces and applying three coat of white wash, complete all as specified and directed. |
| 66 | Supplying and fixing of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including provision of special fittings ( Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), complete all as specified and as directed. |
| 67 | M&L for 20 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete all as specified and as directed. |
| 68 | M&L for 25 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete all as specified and as directed. |
| 69 | S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 70 | S&F 15 mm dia fancy type stop cock/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 71 | S&F 15 mm dia fancy type concealed stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 72 | S & F in repair 125mm size brass chromium plated shower rose with arm or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed. |
| 73 | S & F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 74 | S & F Vitreous China, semi-pedestal pattern (Anglo-Indian Type) with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete, all as specified and directed. |
| 75 | S&F wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polyethylene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and as directed. |
| 76 | S & F vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but excluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed. |
| 77 | S & F PVC valve less symphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and as directed. |
| 78 | S&F for vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP fancy type pillar tap, 01 Nos 32mm waste coupling , one pair of MS bracket, cutting for and pinning in ends of brackets complete all as specified and directed. |
| 79 | S&F 20mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed. |
| 80 | S&F 25mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed. |
| 81 | S&F 600mmx450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with PVC / aluminium frame and fixed to wooden plugs with chromium plated brass screws, cup washers, complete all specified and directed. |
| 82 | S&F 20mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite including cement screed 10mm thick CM 1:3 complete all as specified and as directed. |
| 83 | Rounding to edges of stones slab one edge, such as in steps, cooking plate form, and other similar situation complete all as specified and as directed. |
| 84 | S & F brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated complete all as specified and directed. |
| 85 | S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall complete all as specified and directed. |
| 86 | S & F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 87 | S & F PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) laid in trenches complete all as specified and directed. |
| 88 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed. |
| 89 | S&F PVC (SWR) bends with access door any radius 110mm bore complete all as specified and as directed. |
| 90 | S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all as specified and as directed. |
| 91 | S&F PVC(SWR) vent cowl 110mm bore complete all as specified and as directed. |
| 92 | S&F PVC (SWR) bends any radius 75 mm dia complete all as specified and as directed. |
| 93 | S&F PVC (SWR) bends with access door any radius 75 mm dia complete all as specified and as directed. |
| 94 | S&F PVC (SWR) junction single (single T) equal or unequal of bore 75mm complete all as specified and as directed. |
| 95 | S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 96 | Material and labour Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed within wooden beading or with nuts and bolts to existing steel windows/wooden windows complete all as specified and as directed. |
| 97 | S&F Extruded aluminium alloy handles,150mm fabricated type anodized complete all as specified and as directed. |
| 98 | Material and labour Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification complete all as specified and as directed. |
| 99 | Material and labour Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside complete all as specified and as directed. |
| 100 | Supply and Fix 100mm Butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-22 complete all as specified and as directed. |
| 101 | Supply and fix Aluminium, 150mm anodized, barrel tower bolts extruded section & fixed complete all as specified and as directed. |
| 102 | Supply and fix Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors frames, shutters windows frames sliding shutters, ventilators, grills and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. complete all as specified and as directed. |
| 103 | Supply and fix sheet glass 4mm thick and glazing with oil putty/ alu beads n.exc. 0.50sq.m. each pane complete all as specified and as directed. |
| 104 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position all as specified complete all as specified and directed. |
| 105 | S&F 20 mm dia brass ball valve, high pressure with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule fixed in repair complete all as specified and directed. |
| 106 | S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed. |
| 107 | M&L Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLSH) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLSH) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick, masonry walls, roof etc including 1.6 mm thick MS sunken box of required size and 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces complete all as specified and directed at site . |
| 108 | All as per item No. 106 but for One 3 pin 5 Amps switch socket outlet point on independent board complete all as specified and as directed. |
| 109 | All as per item No. 106 but for One 3 pin 15 Amps switch socket outlet point on independent board with 4.0 sqmm PVC (FRLSH) insulated unsheathed single core multi stranded copper conductor all as specified and directed. |
| 110 | M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed at site. |
| 111 | M&L switch socket combination flush type 5 Amps Multipurpose 2 in 1, 3 pin/5 pin with porcelain base complete all as specified and directed at site. |
| 112 | Supply and fix switch, single pole, one way, 16 Amps complete all as specified and as directed. |
| 113 | Supply and fix socket outlet 2-in-1, 6/16 Amps, complete all as specified and as directed. |
| 114 | M&L lamp holder insulated body with back plate suitable for bittern fittings complete all as specified and directed at site. |
| 115 | S&F Ceiling rose surface Bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site. |
| 116 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Havells / Crompton/ Wipro |
| 117 | Supply and fix 20W,decorative, wall mounted, ultra slim, LED lighting fixture size (1224x 43x58)mm, 6500K with high lumen output, environmental friendly, energy efficient with electronic driver polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete with all fixing arrangement etc, complete all as specified and as directed. Makes : Cat Nos. STOUTMINI1200BS20WLED 865SPCWH of HAVELLS / BN100CLED20S-6500PSUL 120GRS4 of PHILIPS or techno commercially equivalent make as listed in list of makes and as approved by GE. |
| 118 | S&F in repair Factory made SPN 8 way distribution board in sheet steel enclosure double door with suitable rated bus bar, 240 Volts suitable for housing RCBO SPN as incomer and SP MCBs, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. IP 43 protection complete all as specified and as directed. as outgoing complete all as specified and as directed. |
| 119 | Supply and fix MCB SPN 40 to 60 Amps, 240 volts 50Hz AC supply, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed. |
| 120 | S&F in repair 240V, 10 KA 'C' curve MCB of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed at site. |
| 121 | Supply and fix exhaust fan made of sturdy Engineering plastic body complete with louvers shutter 240V, 50 Hz, 1200 rpm copper winding 250 mm Sweep, complete with all fixing arrangement at site complete all as specified and as directed. (Note: Cost for cutting suitable holes for exhaust fan and making good the disturbed surfaces shall be deemed to be included the quoted rate.) |
| 122 | S&F electric water heater, storage type Feroglas coated inner container, Mcoloy glass coated Heating Element provide Whirl flow technology, Heavy duty protective anode rod with porcelain enamel inner tank and heating element upto 2 KW capacity of 25 litre, 8 Bar BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc., and 04 No's grouting bolts, nuts & washers grouted on stone wall and making good the distributed grouted surface complete all as specified and directed at site. Make : Velora Pro of Havells / Bajaj / CG |
| 123 | Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point including necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade, protection pipe for GI earth lead complete all as specified and directed. |
| 124 | Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core laying in trenches/ fixed to walls/ floor / poles etc. including taking out of existing cable complete all as specified and directed. |
| 125 | Supply and spread approved dry river sand for cushioning of cable laid in trenches including watering and consolidation, complete all as specified and directed. Note:- Punned thickness of sand cushioning shall only measured for payment purpose. |
| 126 | M&L for brick, sub class 'B', old size, laid in trenches as cable protection covers, complete all as specified and directed. |
| 127 | Supply and lay galvanized steel water tubing medium grade of 25mm bore complete with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, unions complete all as specified and as directed.Make : TATA / JINDAL / ZENITH |
| 128 | S&F Gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of 25mm bore including taking down complete all as specified and directed. MAKE : LEADER/ZOLOTO/KIRLOSKAR |
| 129 | Cutting/Boring on the existing CI/GI pipe line50/25mm dia (in position) for insertion of new galvanised Tee 50 x25 mm for branch connection including necessary jointing material complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender