Tender For Supply And Installation Of Speed Breakers, Safety Cones, Cats Eye, And Other Road Safety Measures At Various Locations In Chhata & Tajgung Zone In The Interest Of Public Safety And Convenience
Tender Value
3.12 Crore
Estimated cost
Bid Submission
24 Aug 2026
23 days left
EMD
5.30 Lakhs
Bank guarantee accepted
Document Fee
23600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Installation Of Speed Breakers, Safety Cones, Cats Eye, And Other Road Safety Measures At Various Locations In Chhata & Tajgung Zone In The Interest Of Public Safety And Convenience
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, and Fixing of Road Safety Equipment |
| 2 | Supply of RS (Rumble Strip) of size 1000x125x22mm When Flat made of high Quality polymer to be installed on the road. These Rumble strip shall be fixed on road with epoxy/nails on the road as per IRC-SP-55.the product shall be fixed using epoxy/bituminous adhesiv as per recomondation of Engineer In-Charge |
| 3 | Supply FLD Flexible lane divider come spring post of size 750mm hight with 200mm base of strong polymer with 48mm 3 bands of white/gray retroreflective seating of Class B As Per IRC-SP-55 The Reflective Sheet of Class B Used For bands shall be warranted as per IRC-67. |
| 4 | Solar Power road marker (Solar Studs) The solar studs shalt be made of Aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13.635 kg tested in accordance with AST[4 D4280. Its colour may be while red, yellow green or blue or combination as directed by the Engineer Its water resislance shall meet the requirements of IP 65 in accordance wilh 15:12063:1987 category 2 for protection againsl water ingress The dimensions of solar sluds shall not be less than 100 mm X 100 mm X 10 mm Itshall have super bright LEDS so as to provide long visibillty from a distance of more than BOO m. Its flashing rate shall not be less than'l Hz lts should be able to give the prescribed performance in the temperrature range of -40°C to +55°C Its life shall be not less than 3 Years. The rate shall include all materials, labour, equipments, fabrication, transportation, erecuon, installation and incidentals all complete as per direction of the Engineer-in-Charge |
| 5 | Supply and Fixing Cat EYE including supply of all material, loabour, T&P etc. all complete. |
| 6 | Supply & Fixing of retro reflective speed braker to as made of fiber/pvc in size 350x250x50mm yellow/black havy duty with two colours HIP reflective tape in double side interlocking system with accessories. |
| 7 | Tree Plats Supply & Fixing of Retro reflective 1x Tree Plate having size 15cm x15cm, conJisiing type X1 Retro reflective Sheeting lixed Over 1.50 mm thick aluminiu; sh;et including labour, Material T&P etc for proper completion of the work. The rate shall include all materials, labour, T&P, transportation, Installation and incidentals all complete as per direction of the Engineer-inCharge. |
| 8 | Transport including loading, unloading and stacking |
| 9 | Traffic cone. Traffice Cone: Supply of red fluorescent wilh with refleclive sleeve traffic cone a squre base of 300 to 500 mm & Thickness 35 mm and a heiht of 1000 mm to 500 mm. Thay shall be brilliant red/orange / yellow and shall be made of LDPE material ihat can be struck without causing damage lo Impacting vehicles. Retro-Reflect orization of cone shall be provided by a 150 mm wide while band located 75 lo 100 mm bom the top of the cone and additional '100 mm wide white band located approximately 50 mm below the 150 mm band The rate shallinclude all materials, labour, T&P, transportation, Installation and incidentals all complete as per direction ofthe Engineer-in-Charge(1) 1000 mm HeightTraffic cone (2)750 mm Height100.00NosTraffic cone (3)500 mm Height |
| 10 | Sub Total |
| 11 | Add GST @18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender