Tender For Balance Work Of Phc Nanwana (Sh:- Repair Of Door,Windows & Water Shed Stand Etc.(Deposit Work) Estimated Cost Rs:-4,46,632.00 Earnest Money Rs:-9000.00 Time Limit :- Two Month Cost Of Tender Form: 350/-
Tender Value
4.46 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
3 days left
EMD
9000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Work Of Phc Nanwana (Sh:- Repair Of Door,Windows & Water Shed Stand Etc.(Deposit Work) Estimated Cost Rs:-4,46,632.00 Earnest Money Rs:-9000.00 Time Limit :- Two Month Cost Of Tender Form: 350/-
BOQ
| Sl. No. | Item Description |
| 1 | Removing white or colour wash by scrapping preparing the surface smooth including necessary repairs to scratches etc.sand papering and complete and as per the direction of Engineer in Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 2 | Providing and applying white cement based putty of average thickness 1mm(one millimetre) of approved brand and manufacture of over the plastered wall surface to prepare the surface even and smooth complete as per the direction of Engineer in Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 3 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer as per the direction of Engineer in Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government |
| 4 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications for Painting wood work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine zero liter/ ten square metre) over an under coat of primer applied @ 0.75 ltr/ 10 sqm(zero point seven five liter / ten square metre) of approved brand and manufacture as per the direction of Engineer in Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 5 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (Zero point Ninty letre per Ten Square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (Zero point eighty letre per Ten Square metre)of approved brand and manufacture. as required as per the direction of Engineer in Charges.The rates are inclusive octroi , royality , Malkana, toll tax , GST or other taxes imposed by the Government . |
| 6 | Steel work welded in built up sections/ framed work, (TATA/SAIL/Apollo/ JSW Make ) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 7 | Providing and laying cement concrete 1:2:4 (one cement : Two Sand : four graded crushed stone )aggregate 20mm (Twenty millimeter) nominal mix in bed block and dirt wall for plain/reinforced cement concrete in substructure as per drawings and technical specification clause 802,804,805,806,807,1202 & 1204 including entire carriage of material in all leads and lifts. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government . |
| 8 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Sintex make as per the direction of Engineer in Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government |
| 10 | Providing and fixing ISI (Indian standard Institute) marked flush door shutters conforming to IS : 2202 ( Indian Standard : Twnty two hundred two) (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm (thirty five (millimeter) thick including ISI (Indian standard Institute) marked Stainless Steel butt hinges with necessary screws35 mm (thirty five (millimeter) thick including ISI (Indian standard Institute) marked Stainless Steel butt hinges with necessary screwscomplete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender