Tender For Extension For Providing Irrigation Facility To Village Okhoo Dabrota Sc Basti From Lis Okhoo In Tehsil Ramshehar District Solan Hp (Sub Head:- Providing Laying And Jointing Of Gms Pipe In Rising Main And Supply And Erection Of Centrifugal
Tender Value
12 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
3 days left
EMD
24019
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Extension For Providing Irrigation Facility To Village Okhoo Dabrota Sc Basti From Lis Okhoo In Tehsil Ramshehar District Solan Hp (Sub Head:- Providing Laying And Jointing Of Gms Pipe In Rising Main And Supply And Erection Of Centrifugal Pumping Machinery 17.5 Hp With Allied Accessories) Undwer Dmft.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in drains and channels etc. in earth work lift up to 1.5 meter stacking the excavated soil not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15 cm layer in trenches consolidatig each deposited layers by ramming and watering and then disposing of all surlus excavated earth as directed with in a llead of 20 meter in pick jumper work. |
| 2 | Providing, laying jointing,testing and commissioning at site in treches galvanised miled steel pipe following dia (medium grade) as under confirming to BIS-1239 (part 1) 1990 or latest with upto date amendments capable of with standing required test pressure as prescribed in BIS/ISO code, in random lengths of 5.50 to 5.60 meter. The pipe ends shall be bevelled suitable for butt welding, confirming to IS -816-1969 or latest as applicable (leak proof) in three layers at site of work with welding rods of standard make and all allied accessories what evere required for welding at site, tail pieces, tees, bends and other special manufactured from parent pipes etc. and cutting of pipes whatever required as per site requirment i/c carriage in all leads and lifts and as per directed by Engineer in Charge (earth work in trench to be measured and paid for separatly). |
| 3 | 80 mm dia (M) |
| 4 | Providing and fixing MS flanges of following dia to GMS heavy/medium grade tubes conforming to IS: 6392-1971 of table-5, dia and welding with GMS pipe including cost of nuts, bolts washers complete as per IS 1963 specifications including packing sheet 3mm thick minimum and painting with anticorresive paints complete in all leads lifts and carriage of materials at site as directed by Engineer in Charge. |
| 5 | 80 mm dia T-17 |
| 6 | 80 mm dia T-5 |
| 7 | Supply, erection, testing & commissioning of horizontal spindle, horizontal split casing, radial split Single,/Multi stages centrifugal pumps suitable for operation, in parallel of recommended make such as Mather and platt/KSB/Kirloskar/Jyoti/Beacon wear/BS &BE or other approved make conforming to BIS 1520-1980 with upto date amendments read with BIS 9137-1978 or latest edition to handle clear water having charteristics with impellers, casing ring, priming funnels & shaft sleeves of bronze, shaft of stainless steel with cast iron casing of suitable capacity coupled directly through a flexible coupling on a common base plate of cast steel /Mild steel to BHEL /Kirloskar/ NGEF/ Crompton / Siemen/Jyoti /GEC make energy efficient three phase squirrel cage electric induction motor having energy efficiency level IE -2 or higher suitable for operation on the data given below including the cost of all accessories in all leads and lifts and carriage of material of site and as per the direction of Engineer in Charge. |
| 8 | Tota Head = 139.47 meter |
| 9 | Discharge of each Pump set = 4.80 LPS Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender