Tender For Construction of Toilet Block At New Tunnel Dhalli In Ward No.21 Mashobra (Sh:- Construction of Steel Structure Etc)
Tender Value
9.25 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
0 days left
EMD
18500
Bank guarantee accepted
Document Fee
413
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Toilet Block At New Tunnel Dhalli In Ward No.21 Mashobra (Sh:- Construction of Steel Structure Etc)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. Hard Roack blasting prohibited and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site, according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at approved dumping site Bharyal. including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required).All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation the usefull stones as per the direction of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 3 | Providing and laying in position specified grade of cement concrete, excluding the cost of centering, shuttering, All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 4 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 5 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of 6 mm thick chequered plate wherever required, all complete including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 6 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class D/wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 7 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class D wood 40 mm thick shutters including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etcincluding carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge |
| 9 | Providing and fixing S.S sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 10 | Providing and fixing IS : 12817 marked stainless steel butt hinges with C.P. Brass screws etc. complete :125x64x1.90 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 11 | Providing and fixing S S tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 12 | Providing and fixing S. S. Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 100 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 13 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 14 | 15 mm cement plaster in single coat on Rough side of brick/Concrete /stone walls for interior plastering up to all floor level including arises internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth in cement motar 1:6 (1 cement : 6 Sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 15 | Applying Birla white wall care putty over plaster surface after thoroughlybrushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface completeincluding carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 16 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 17 | Providing and fixing 0.63mm thick prepained steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 mircons over 5 mircons primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge |
| 18 | Providing and fixing 0.47 mm th.prepainted Liner sheet for celling etc Complete with all accessories and required as per the direction of Engineer-in-charge |
| 19 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m² Ridges plain (500 - 600mm) metre including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 20 | Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete 0.63 mm thick with zinc coating not less than 275 gm/m² including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 21 | Providing &Fixing BP sheets 1.66mm to 2mm thick in ever board/facial/soffits ceiling i/c cutting fixing and welding to steel work including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 22 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 23 | Providing and laying vitrified wall tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 24 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent |
| 25 | P/L PVC Pipe 100 mm dia (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 26 | P/F PVC Door Bend 100 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 27 | P/F PVC Collar 100 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 28 | P/F PVC Door Tee 100 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 29 | Providing and fixing PVC pipes 75 mm dia (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 30 | P/F P.V.C. Door bend 75 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 31 | P/F PVC Collar 75 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 32 | P/F PVC Door Tee 75 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 33 | P/L G.I Pipe 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 34 | P/F G.I / M.I union 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 35 | P/F G.I Nipple 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 36 | P/F PVC Floor trap 100 mm dia (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 37 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 38 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 39 | Providing and fixing 10 liters vitreous china low level flushing cistern with a pair of C.I or mild steel brackets complete with flushing such as lead valve less syphon, 15 mm nominal size brass ball valve with polythene float CP brass handle unions and coupling for connections with inlet outlet and overflow pipes 40 mm dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe is to be measured and paid separately) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 40 | Providing and fixing PVC water storage tank syntax or equivalent three layer cost of connecting / tank nipples , making connection etc. 1000 litres capacity including all assecories. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 41 | P/F PVC Connection pipe 15 mm dia 45 cm long with Brass Union for wash basin & Sink including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 42 | Providing and Fixing 32 mm dia PVC waste pipe for wash basin or sink including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 43 | P/F CP Brass Bib cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 44 | P/F CP Brass Bib cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 45 | Renewing of glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 46 | Providing and fixing mirror of superior glass (of approved quality) and ofrequired shape and size with plastic moulded frame of approved make andshade with 6 mm thick hard board backing :Circular shape 450 mm dia including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 47 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 48 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 49 | Random rubble masonary with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 garded stone aggreate 20 mm nominal size) upto plinth level with : Cement Motor 1:6 ( 1 cement : 6 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender