Tender For Sewerage Interception & Diversion Works Under Swatch Bharat Mission For Mc Joginder Nagar Distt Mandi (Hp) (Sh: - Providing , Laying Jointing Carriage & Testing Of Di Pipe And Construction of Manhole In Various Leftout Wards Of Mc Joginder
Tender Value
24.62 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
6 days left
EMD
49241
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Sewerage Interception & Diversion Works Under Swatch Bharat Mission For Mc Joginder Nagar Distt Mandi (Hp) (Sh: - Providing , Laying Jointing Carriage & Testing Of Di Pipe And Construction of Manhole In Various Leftout Wards Of Mc Joginder Nagar Town For House To House Connection And Restoration Of Dismentalled Mc Path ).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches in earth work,lifts up to 1.50 meters atacking the excavated soil not more than 3 meters clear from the edge of the excavation and then returning the stacking soil in 15cm .layers, when required in to plinths sides of foundations etc, consolidating each deposted layer by ramming and watering and then deposing of all surplus excavated earth as directed with in a lead of 20 metres in all respect with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 2 | Providing, laying , jointing and testing in trenches ISI marked centrifugally cast ( spun) Ductile iron pressure pipes for water , gas and sewerage with socket and spigot ends conforming to IS - 8329-2000 and latest with up to date ammendments in length of 5 to 6 mtrs class K7 suitable for push on joint ( rubber gasket D- jointing ) including short pieces, collars with cement nortor lining in side the pipes with outside zinc coating as per IS- 8329-2000. ( Earth work in trenches to be measured and paid for separetely complete in all respect with in all leads and lifts as per the direction of Engineer in charge. 150 mm dia |
| 3 | Providing Tyton ( Push on joints) to ductile iron pipes and fittings including testing of joints and cost of tyton rubber ring ( SBR quality) conforming to IS: 12820-1989 latest with update ammendments. 150 mm dia |
| 4 | Providing Tyton Y- junction for ductile iron pipes and fittings including testing of joints conforming to IS: 12820-1989 latest with update ammendments complete in all respect with in all leads and lifts as per the direction of Engineer in charge. 150 mm dia |
| 5 | Providing Tyton plug for ductile iron pipes and fittings including testing of joints conforming to IS: 12820-1989 latest with update ammendments complete in all respect with in all leads and lifts as per the direction of Engineer in charge. 150 mm dia |
| 6 | Providing and laying cement concrete 1:4:8(1cement:4sand:8graded stone aggregate of 40mm nominal size)and curing complete excluding cost of form work including all leads and lifts: a) Foundation and Plinth. |
| 7 | Providing & laying cement concrete 1:1.5:3 (1 cement 1.5 sand 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from work and reinforcement of RCC work in foundation with in all leads lifts as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 8 | Foundation and footings |
| 9 | Walls ( any thickness but not less than 0.1 mtr. Thickness) attached pilasters, buttresses, plinth and string courses etc. from top pf foundation level up to floor two level in all leads and lifts. |
| 10 | Suspended floors, roofs, landings, shelves and their supports balconies, beams girders bressumers and cantilevers upto floor two levels |
| 11 | Providing and laying cement concrete 1:2:4(1cement:2sand:4graded stone agg.40mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work |
| 12 | Foundation and plinth |
| 13 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in situ reinforced concrete and plain concrete work in:- |
| 14 | Vertical surfaces such as Walls ( any thickness but attached pilasters, buttresses, plinth and string courses etc. and the like complete in all leads and lifts. |
| 15 | Flat surface such as soffits and suspended floors, roofs, landings and the like: Floors etc. up to 200mm in thickness within all leads and lifts |
| 16 | Providing mild/tor stel reinforcement for RCC work including bending, binding and placing in position complete as per the ditection of Engineer in charge. |
| 17 | Providing anf fixing SFRC manhole cover ( extra duty circular) 560 mm dia with frame ( 500 to 560 mm) M- 17010013 ( EHD-35 ) in all leads and lifts and to the entire satisfaction of Engineer in charge. |
| 18 | Boulder filling with hand packed as per the direction of Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender