Tender For Name Of Work: Partition And Office Space Development In Room No. 4F-12A (Ees Department) At Iiser Mohali
Tender Value
10.20 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
20 days left
EMD
21000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
S.a.s Nagar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Name Of Work: Partition And Office Space Development In Room No. 4F-12A (Ees Department) At Iiser Mohali
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 3 | 250x10 mm |
| 4 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 5 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 6 | 100 mm |
| 7 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete |
| 8 | Twin rubber stopper |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 10 | For fixed portion |
| 11 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 12 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 13 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 14 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 15 | Pre-laminated particle board with decorative lamination on both sides |
| 16 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 17 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 18 | Providing & Fixing 9mm having absorption coeffiecient 1.01 @315 Hz.Supplying Acoustics Elegant Wood perforated Tile made up of cement fiber 600x600/300X1200 X9mm with square edge density 1050kg/m3 covered with laminate on front side and Acoustics fibre on the back side, thus making it acoustically absorbtive, water resistance, fire resistant. The tiles are anti sag and The installed system should provide Abs coeff. of 1.01 @ 315 Hz tested as per IS:8225/ISO:354/ASTM 423C To be installed with Aluminium H Profile on GI studs with the layer of water-resistant Coating 600x600mm centre to centre 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 for excellent results and include scaffolding. color and desgin as per the direction of EIC |
| 19 | Providing & fixing of doors size 1.2x2.1 (double leaf) shall be of 44mm leaf thickness, 0.80mm GP/SP powder coated metal sheets on both sides (60-80 microns) filled with PUF Density 42 Kg/m3 , honeycomb ( as required). Include hardware, silicone, sealant, etc. The door fitted with 1.2mm GPSP Powder coated Chowkhat. Include hardware, silicone, sealant, etc. The following accessories of will be provided with doors. , the colour and design shall be approved by the Engineer-in-Charge/ institute.SS Ball bearing HingesHydroulic Door closer std armSS Dead Lock with both sides key operationsSS 'D' Type Handles and one side push plate (S.S.)Automatic door drop sealDouble Glazed View Glass of size 400x600mm with SS ChannelsSS Kick plates upto 300mm height on push sideDoor Caps |
| 20 | Providing & fixing of doors size 1.0x2.1 (single leaf ) shall be of 44mm leaf thickness, 0.80mm GP/SP powder coated metal sheets on both sides (60-80 microns) filled with PUF Density 42 Kg/m3 , honeycomb (as required). The door fitted with 1.2mm GPSP Powder coated Chowkhat. Include hardware, silicone, sealant, etc. The following accessories of will be provided with doors. The colour and design shall be approved by the Engineer-in-Charge /institute.SS Ball bearing HingesHydroulic Door closer std armSS Dead Lock with both sides key operationsSS 'D' Type Handles and one side push plate (S.S.)Automatic door drop sealDouble Glazed View Glass of size 400x600mm with SS ChannelsSS Kick plates upto 300mm height on push sideDoor Caps |
| 21 | Providing & fixing of 80mm thick PUF insulated Wall Panel with 0.50mm thick PPGI sheet with micro (RAL-9002) both sides with FR Garde PUF Density 44±10% Kg/m3 in metalic tongue and Groove joint system, cut to size, with no loading of wastage with additional 90º bends in Male & Female groove to have proper sealing, Strength & Air Tight joints Panel to Panel,CFC free & Ozone friendly with hardware, silicone, sealant, etc., the colour and design shall be approved by the Engineer-in-Charge / institute. |
| 22 | Providing & fixing of PPGI Top/Bottom C - channels of size 30x82x30 X.5 MM mm as per site requirment for Flashings including accessiores etc as per direction of engineer incharge. |
| 23 | Providing & fixing of PPGI inner corner of size 40x40X .5MM mm as per site requirment for including Accessories as per direction of engineer incharge. |
| 24 | Providing & fixing of PPGI outer corner of size 100x70X .5MM mm as per site requirment and including Accessories as per direction of engineer incharge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender