Tender For Special Repair To Static Water Tank No.1 And 2 At Mtn Dou And Office And Otm Main Hall 88, Provn Of 03 Urinal For Dsc Pers, Air Conditioners For Early Intervention Centre, 01 X Deep Freezer, 01 X Regrigerator For Adhoc, Scrub Stn In Icu, A
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Aug 2026
0 days left
EMD
86600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Static Water Tank No.1 And 2 At Mtn Dou And Office And Otm Main Hall 88, Provn Of 03 Urinal For Dsc Pers, Air Conditioners For Early Intervention Centre, 01 X Deep Freezer, 01 X Regrigerator For Adhoc, Scrub Stn In Icu, Addn/Altn Of Bedside Locker In Surg Ward Ii And Iii At 151 Base Hosp Under Ge Guawahati
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-Aug-2026 |
| 2 | 22-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of surface and removal of loose concrete of old surfaces complete all as specified & directed |
| 2 | M&L for Providing and applying integral crystalline slurry of hydrophilic in nature for water proofing treatment to the RCC structures like retaining walls of the basement water tanks, roof slabs podiums, reservoir, sewage & water treatment plant, tunnels/ subway and bridge deck etc. prepared by mixing in the ratio 5:2 (5 parts integral crystalline slurry : 2 parts water) for vertical surface and 3:1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (integral) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the directed and complete all as specified & directed. |
| 3 | M&L for Mild steel TMT bars 6 to 8mm dia, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed. |
| 4 | M&L for Nos of anchoring for 8mm bar with fosroc lokfix E77 chemical complete all as specified and directed. |
| 5 | M&L Polymer Bond-coat by using acrylic polymer, cement in 1:1 proportion or in recommended proportion as per manufacturer's specification including cleaning the surface wetting etc. before applying polymer plaster wherever required complete all as specified and directed. |
| 6 | M&L for Providing mixing and applying SBR polymer (of approved make) modified cement mortar in proportion of 1:3 (1 cement : 3 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directed 25mm thickness in two layers complete all as specified and directed. |
| 7 | M&L for Cementitious Grouting at various point using Fosroc Cebex - 100 complete all as specified and directed. |
| 8 | M&L for Epoxy Grouting at various point for Structural Soundness complete all as specified and directed. |
| 9 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 10 | M&L non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar 1:4, all as specified & as directed. |
| 11 | M&L for glazed ceramic (coloured) tiles of size 450x350x6-7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing course in cement mortar 1:4 complete all as specified & as directed. |
| 12 | M&L for prepolished chequered cement concrete, coloured tiles, textured finished of size 250 x 250 x 25 mm thick set jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 13 | Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed. |
| 14 | M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete as specified and directed. |
| 15 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 16 | M&L for 15mm thick rendering with cement mortar (1:4) on fair faces of brick work in two layers (10mm & 5mm) seperately mixed with water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and fair without using extra cement complete all as specified and as directed.Note:- WPC shall be measured and paid seperately under appropiate item. |
| 17 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 18 | M&L for providing 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in sub base and plinth protection finishing the surface even and fair complete all as specified and as directed. |
| 19 | M&L preparation of new surfaces of wall and applying two coats of weather exterior acrylic emulsion paint over a coat of 1.5mm thick wall care putty including priming coat of exterior primer complete all as specified and directed. |
| 20 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loosed soil complete all as specified and as directed. |
| 21 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth;for foundation etc or for shaft, wells, cesspits, manholes, pier hole etc or taking out/laying UG cable etc. not exceeding 10sq.m on plan and not exceeding 1.5m in depth and getting out including forming bottom surface in soft soil complete all as specified and as directed. |
| 22 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 23 | Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified. |
| 24 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 25 | M&L for RCC (nominal mix) in (1:2:4) type B1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings and mass concrete complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item |
| 26 | M&L for RCC (nominal mix) in (1:2:4) type B1 (20 mm graded stone aggregate) as in plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete filling and mass concrete complete all as specified and directed.Note:- Reinfocements will be measured and paid seperately under appropiate item |
| 27 | M&L for RCC (nominal mix) in (1:2:4) type B1 using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item |
| 28 | M&L RCC (nominal mix) (1:2:4) type B1 using 20mm graded granite stone aggregate in columns, pillars, piers, posts, struts and the like complete, all as specified and directed. Note :- Reinforcement and formwork shall be measured and paid for separately. |
| 29 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 30 | S&F Mild steel framed work in tubular trusses and tubular posts using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc complete all as specified & as directed. |
| 31 | M&L preparation of new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and as directed. |
| 32 | S&F Prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 33 | M&L for Brickwork with subclass ‘B’ bricks straight or curved on plan to any radius in half brick wall , built in CM 1:4 complete all as specified and as directed. |
| 34 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, Rough finished surfaces of concrete flat complete all as specified and as directed |
| 35 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished surfaces of concrete flat complete all as specified and as directed |
| 36 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished surfaces of concrete square, rectangular or polygonal complete all as specified and as directed. |
| 37 | M&L for Factory made solid panel PVC door shutler 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered WiUl hea moulded plain colour PVC 'C' chrume having a PVC sheet sh'ip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. fraine welded / sealed to the stiles & rails with suitable PVC shee beading, and joined together with solven cement, suppling & fixing in the frame a site as per specification & drawing complete all as specified and as directed. |
| 38 | Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening complete as per specification & drawing as specified in SSR Part I, Section 8 and as directed. |
| 39 | Supply and fixing 150 mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 40 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed. Length of bolt omplete all as specified and as directed. |
| 41 | S&F 125 mm aluminium handles cast type, anodised complete all as specified and as directed. |
| 42 | S&F Butt Hinges 100 mm long heavy weight cold rolled mil steel omplete all as specified and as directed. |
| 43 | M&L for 75 mm thick providing cement concret type D-2 (1:4:8) using 40 mm graded stone aggregated for sub-base complete all as specified and as directed. |
| 44 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 45 | M&L cement concrete (1:3:6) type C1 using 40 mm graded stone aggregate as in surface channels and drains concrete complete all as specified and directed. |
| 46 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed. Note :- Measurment shall be taken only for inner girth. |
| 47 | M&L for hardcore broken stone or boulders hard core of gauge n.exc. 63 mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed. |
| 48 | M&L non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar 1:6, all as specified & as directed. |
| 49 | M&L for glazed ceramic (coloured) tiles of size 450x350x6-7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing course in cement mortar 1:3 complete all as specified & as directed. |
| 50 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair complete as specified and directed. |
| 51 | M&L for two coats of cement base paint over a coat of alkali resistant primer including preparation of new surfaces of wall complete all as specified and as directed. |
| 52 | M&L for preparation of new plastered or unplastered surface of wall and applying distempering two coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as permanufacturer's specification complete all as specified and directed |
| 53 | Supply and fixing 500 liters rotational moulded polyethylene water storage tank, multi layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I complete all as specified and as directed. |
| 54 | S&F 25mm Gun-metal. globe or gate valves, with iron wheel headt screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 55 | S&F 25mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 56 | S&F PVC (SWR) floor trap 75 mm dia plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 57 | S&F PVC (SWR) gully trap 125x110 mm plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 58 | S&F 15mm bib tap cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for bass ferrule complete all as specified and directed. |
| 59 | S&F wash basin vitreous china flat back or angle back type size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and including waste pipe complete all as specified and as directed. |
| 60 | S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 61 | S&F 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, with inlet ball valve, float and brackets including flush pipe and PVC connection pipe 15mm bore with PTMT nuts of length 450mm, complete all as per directed. |
| 62 | S&F 600 x 450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified complete all as specified and as directed |
| 63 | S&F soap dish, vitreous china, white, approximate size 160x160x90mm fixed to plugs with chromium plated (CP) brass screws complete all as specified and as directed. |
| 64 | S&F tubular towel rail 20mm dia,D Type 600 mm long between flanges aluminium anodised complete all as specified and as directed. |
| 65 | S&F steel tubes medium grade galvanised 15 mm dia with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 66 | S&F steel tubes medium grade galvanised 20 mm dia with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 67 | S&F Pillar taps 15mm, cast copper alloy fancy type, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed |
| 68 | S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 150mm cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate) complete all as specified and as directed. |
| 69 | S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 70 | S&F cast copper alloy, chromium plated fancy type, 15 mm bore angular stop valve with wall flange, screwed down, high pressure with crutch handle, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 71 | M&L for precast RCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in lcover slabs including necessary form work and set in CM (1:4) complete all as specified and as directed.Note :- Reinforcement shall be measured and paid for separately. |
| 72 | Supply and fixing rain water drainage pipe PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe complete all as specified and as directed. |
| 73 | S&F 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 74 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 75 | S&F 110mm bore PVC ( SWR) vent cowl complete all as specified and directed. |
| 76 | M&L for brick work with sewer bricks, straight or curved on plan exc 6 metre mean radius as in full brick thick walls built in CM(1:4) using old size bricks for manhole/septic tank/ soak well etc in sewer works complete all as specified and as directed. |
| 77 | M&L for loose filling with broken bricks 40mm to 80mm soakage complete all as specified and directed. |
| 78 | M&L for glazed ceramic (coloured) tiles of size 450x350x6-7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing course in cement mortar 1:3 complete all as specified & as directed. |
| 79 | M&L for Virified Ceramiccoloured/Dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed 15 mm thick 1:6 complete all as specified and as directed. |
| 80 | Dismantling boarding, any description, fixed in any position with nails complete all specified and as directed. |
| 81 | Taking down chowkats or frame not exc 1.5 sqm with shutter (with out taking off shutter from frame) all as specified and remooving from site complete all as specified and as directed. |
| 82 | S&F 75 mm size butt hinges medium weight cold rolled mild steel complete all as specified and as directed |
| 83 | S&F 100 mm size aluminium handle cast type anodised complete all as specified and as directed |
| 84 | S&F 125 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed |
| 85 | S&F prelaminated particl board 12 mm interior grade prelaminated both side with decorative choice lamination fixed to aluminium frame work all complete all as specified and as directed |
| 86 | S&F powder coated anodised aluminium (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 87 | S&F powder coated anodised aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 88 | Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and as directed. |
| 89 | Taking down carefully UNSV MCB DBs, SP/TP by unscrewing from main switch boards/cut out boxes and removing matrials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good to disturbed surfaces of wall etc as per existing finishes complete all as specified and directed |
| 90 | M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade drawn through and including non metallic rigid PVC Concealed conduit,medium grade minimum 20 mm dia ISI marked and conduit accessories fixed on recesses of wall/ceiling/roof and chisselling on wall complete and making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces etc with sunken type pressed steel/welded MS terminal boxes made out of 1.2 mm MS sheet, 3mm thick Modular top cover for mounting of modular fittings,switches,sockets outlets,regulators etc and provisining of 1.5 sqmm PVC insulated unsheathed FRLSH cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly for the following :- |
| 91 | One light/ Fan/ bell point/exhaust fan controlled by one no one way switch complete all as specified and as directed. |
| 92 | One 3/5 pin socket outlet, 5/6 Amps on same board with other switch complete all as specified and directed. |
| 93 | One 3/5 pin socket outlet, 5/6 Amps on independent board with cable of 1.5 sqmm size & other switches |
| 94 | All as per item No.90.00 above but wiring with 2.5 sqmm PVC FRLSH copper conductor unsheathed and 2.5 sqmm PVC FRLSH copper conductor unsheathed cable as earth continuity conductor for 6 pin 6/16 Amp switch socket combination on independent board. |
| 95 | S&F Modular switch one way 10 Amp, 1 module, 240 Volts complete all as specified and as directed. |
| 96 | S&F Modular socket outlet 2 and 3 pin, 5/6 Amps, universal type, 2 module 240 Volts complete all as specified and as directed. |
| 97 | S&F Modular switch one way modular type, 15/16 Amp, 1 module, 240 Volts complete all as specified and as directed. |
| 98 | S&F Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed. |
| 99 | Supply and fixing Modular Bell push with indicator, 5/6 Amp, 1 module, 240 Volts complete all as specified and as directed |
| 100 | Supply and fixing call bell, Ding dong, AC, 230 volt single pole complete all as specified and as directed. |
| 101 | S&F lamp holder, angular PVC/ Polycarbonate with back plate suitable for batten fitting complete all as specified and as directed. |
| 102 | Supply and fixing ceiling rose 3 point/PVC/Polycarbonate, isolated body complete all as specified and as directed. |
| 103 | Supply and fixing modular electronic fan regulator, 100 watt, stepped type, 2 module, 220 volt complete all as specified and as directed. |
| 104 | S&F LED tube light fitting, 1x20/22 watt, 220-240 volt, AC, inverter type with inbuilt rechargeable lithium battery back up for emergency operation, decorative box type complete with LED tube, electronic driver, holder, diffuser and automatic changeover during power failure with minimum of 3-4 hours battery backup suitable for wall/ceiling mounting including connecting up with three core flexiblwe copper conductor of suitable size from ceiling rose complete all as specified and as directed. |
| 105 | Supply and fixing LED street/bldg security light fitting 35 Watt, 230V, AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 106 | M&L for 32mm bore light grade GI pipe fixed as bracket, on wall any type, not less than 1.5 m long and bent to shape as required complete with sutiable clamp made out of 25x4mm Flat iron duly fixed 12mm dia nuts, bolts, washers etc fixed complete with two coats of aluminium paint over a coat of red oxide complete all as specified and as directed |
| 107 | M&L for sub main wiring with 6 Sqmm (nominal area) with two runss (Red for phase and black for neutral) of single core FRLSH PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including PVC regid concealed conduit/ PVC casing N Caping of adequate size but not less than 25mm dia & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including single core 6 Sqmm earth wire, PVC insulated & unsheathed copper conductor green in colour duly connected to earth wire complete as in repair complete all as specified and as directed.. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length. |
| 108 | M&L for sub main wiring with 4 Sqmm (nominal area) with two runss (Red for phase and black for neutral) of single core FRLSH PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including PVC regid concealed conduit/ PVC casing N Caping of adequate size but not less than 25mm dia & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including single core 4 Sqmm earth wire, PVC insulated & unsheathed copper conductor green in colour duly connected to earth wire complete as in repair complete all as specified and as directed.. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length. |
| 109 | Supply and fixing as in repair of Vertical TPN 4 Way, 415 volt with provision and including of MCCB of 63Apm 4 pole and provided with CRCA sheet steel powder coated, double door ready to use DBs provided with insulated vertical phase bus bar, neutral bal,. earth bar, sticking saddle, colour coded interconnecting wire set, cable ties, blanking plates etc complete all as specified & as directed. |
| 110 | S&F in repair MCB SPN distribution board in sheet steel enclosure GLAZED DOOR, 12 ways, 240 Volts IP 43 protection, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09, fix suitable for housing MCBs complete all as specified and as directed. |
| 111 | S&F MCB, SP, 240 volts, 'C' Curve, 06 to 32 Amps, 10 KA, confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and as directed. |
| 112 | M&L for in repair earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SI Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work, PCC pit with RCC cover, char coal, salt, funnel etc including taking down old earthing complete all as specified and as directed. Note:- Rate quoted by tenderers shall be deemed to include for following provisions-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 m. [ii].PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore medium grade & copper lugs, charcoal & salt as reqd .[v]. GI protection pipe of size 15 mm bore light grade 7.5m. |
| 113 | M&L for providing and applying plaster of paris putty of 1 mm thickness over new plastered surface to prepare the surface even and smooth and applying distempering two coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, all as per manufacturer's specification complete all as specified and as directed. |
| 114 | M&L for concealed point wiring complete with 4.0 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade drawn through and including non metallic rigid PVC Concealed conduit,medium grade minimum 20 mm dia ISI marked and conduit accessories fixed on recesses of wall/ceiling/roof and chisselling on wall complete and making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces etc with sunken type pressed steel/welded MS terminal boxes made out of 1.2 mm MS sheet, 3mm thick Modular top cover for mounting of modular fittings,switches,sockets outlets,regulators etc and provisining of 4.0 sqmm PVC insulated unsheathed FRLSH cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly for one 3 pin 15 Amp socket outlet point on independent board complete all as specified and as directed. |
| 115 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 116 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 27, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender