Tender For Addn/Altn Of Wooden Door In Balcony With Upvc Three Track Door In Offrs Md Accn At Cariappa Vihar Under Ge(West) Delhi Cantt-10
Tender Value
43.03 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
6 days left
EMD
86060
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn Of Wooden Door In Balcony With Upvc Three Track Door In Offrs Md Accn At Cariappa Vihar Under Ge(West) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 4 sqm but n.exc 8 Sqm each complete all as specified and directed. |
| 2 | Providing and fixing factory made uPVC white colour fixed door/window area exc 2 sqm each made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5.5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) complete all as specified and directed. |
| 3 | Providing and fixing factory made uPVC white color Sliding door/window Two track area exc 2 sqm each made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5.5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) complete all as specified and directed. |
| 4 | S & F 5.00 mm thick Toughned glass exc 0.5 sqm in each pane fixed with clips and putty or with aluminium/upvc snap beading complete all as specified and directed. |
| 5 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, etc complete all as specified and directed. |
| 6 | Dismantling of floor, hearth or wall tiling including internal layer of terrazzo dado and mortar bedding removing rubbish of the premises complete all as specified and directed. |
| 7 | Taking down cement plaster or any description including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to a distance not exc 50 mts and depositing where directed.complete all as specified and directed. |
| 8 | M&L for light shade vitrified joint free tiles 7 to 8mm thick (square/rectangular) polished, area of each tile n exc 0.36 sqm, in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 etc complete all as specified and directed. |
| 9 | All as per item No 8 above but on vertical surfaces of wall over & incl CM (1:4) 10mm thick cement plaster etc. complete all as specified and directed. |
| 10 | M&L for rendering 15mm thick cement plaster in cement mortar (1:6) finished even & fair without using extra cement on brick/concrete surfaces complete all specified and directed. |
| 11 | M&L for rendering 10mm thick cement plaster in cement mortar (1:3) finished even & fair without using extra cement on brick/concrete surfaces complete all specified and directed. |
| 12 | M&L for preparation of new surfaces of wall and applying two coats of Oil bound distemper with roller complete over a coat of wall care putty (minimum thickness 1 mm) all as specified and as directed. |
| 13 | M&L for preparation of new surfaces of ceiling and applying two coats of Oil bound distemper with roller complete over wall care putty (minimum thickness 1 mm) all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender