Tender For Certain Repair To Officer Mess, Sncos Mess & Airmen Mess At Af Stn Amritsar
Tender Value
9.99 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
18 days left
EMD
19980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair To Officer Mess, Sncos Mess & Airmen Mess At Af Stn Amritsar
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor,hearth or wall tiling including cement mortar bedding (without backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 2 | Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. all as specified and directed by Engr-in-Charge. |
| 3 | M&L for Demolition of cement concrete in any position and any description complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for ceramic glazed coloured tiles of size 350x250x7mm/ 450x350x7mm thick joint free on and incl 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces as cladding ,skirting and dado complete all as specified and directed by Engr-in-charge. |
| 5 | M & L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 6 | M&L for machine cut kota stone slab flooring16-18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including ,cutting and mirror polishing and 20 mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed |
| 7 | Ditto all as per item No 6 above but as in dado, riser & skirting over & incl 10mm thick rendering in CM 1:4 all as specified and directed by Engr-in-Charge . |
| 8 | M&L for polishing of Old surfaces on marble/ granite/ kota stone/ stoe work where ever required, intial preparation includes grinding the surface evenly with machine fitted with fine grade blocks (No. 120) thereafter final grinding with machine fitted with the finest grade grit blocks (No. 320) carried out the day after the first grinding completed. After the final polish, oxalic acid shall be dusted over the surface at the rates of thirty three (33) gms. per square metre sprinkled with water and rubbed hard with pad of wooden rags. The following day the floor shall be wiped with a moist rag and dried with a soft cloth and finished clean complete all as specified. |
| 9 | M&L for non skid/matt finish coloured ceramic tiles, 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed. |
| 10 | M&L for non skid dark/ coloured vitrified ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.42 sqm to but n.exc 1.00sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 complete all as spc. |
| 11 | M&L for non skid dark/ coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 complete all as spc. |
| 12 | M&L for 20 mm thick Granite (of any tpe) work (tablee rubbed and polished) full length in steps, jambs, pillars, window cills,cooking platforms incl making hole for gas pipe and like in cement mortar (1:4) of 15 mm thickness including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 13 | M & L for Rounding to edges of stone slabs of kota,granite etc such as in steps,cooking platform, and other similar situations etc completed all as specified. |
| 14 | Taking down cement plaster on brick or concrete walls, ceiling etc, including racking out joints , hacking for key, scrubbing down with water etc complete all as specified & directed by EIC . |
| 15 | M&L for Rendering 12 mm thick in cement mortar 1:6 on old/new brick or concrete surfaces of walls, finished fair & even complete all as specified and directed by Engr-in-charge. |
| 16 | M&L 5mm thick cement plastering on ceiling in CM 1:3 over fair faces of concrete surfaces and rendering is to be finished fair & even complete all as specified and directed by engineer in charge . |
| 17 | M&L for chipping off/ taking down the spalled and old concrete from RCC members i.e RCC columns on internal surface for application of micrococrete upto three storey complete all as specified and directed by Engr-in-Charge . The follwing steps are to be followed -i) Cleaning of rusted bars to be done with wire brushes or sand blasting till complete removal of rust , after this coating of existing reinforcement bars shall be done by applying protective anti-corrosive zinc primer of fosroc or equivalent make with coverage as per technical specifications of manufacturer. ii) Application of epoxy bonding agent on the surface before application of micro-concrete.iii) Mechanical application of micro-cocrete material comprising of 10mm down graded aggregate chips to be mixed in a mechanical slow speed mixer . The mixed material shall be placed immediately in to the position, properly with out any time gap complete for an average thickness 25 mm including finishing the surface even and smooth, complete all as specified and directed by Engrs -In-Charge.Note- i) Work shall be executed by certifed applicator of approved make.ii) Primer , bonding agent and micro- concrete matrial shall be of same make .ii) Cost of scaffolding shall be included the qouted rate no extra amount will be paid for this .Make :- Fosroc , Sika , Dr. Fixit . |
| 18 | M&L for chipping off/ taking down the spalled and old concrete from RCC members i.e RCC Beams , slabs on internal surface for application of micrococrete upto three storey complete all as specified and directed by Engr-in-Charge . The follwing steps are to be followed -i) Cleaning of rusted bars to be done with wire brushes or sand blasting till complete removal of rust , after this coating of existing reinforcement bars shall be done by applying protective anti-corrosive zinc primer of fosroc or equivalent make with coverage as per technical specifications of manufacturer. ii) Application of epoxy bonding agent on the surface before application of micro-concrete.iii) Mechanical application of micro-cocrete material comprising of 10mm down graded aggregate chips to be mixed in a mechanical slow speed mixer . The mixed material shall be placed immediately in to the position, properly with out any time gap complete for an average thickness 25 mm including finishing the surface even and smooth, complete all as specified and directed by Engrs -In-Charge.Note- i) Work shall be executed by certifed applicator of approved make.ii) Primer , bonding agent and micro- concrete matrial shall be of same make .ii) Cost of scaffolding shall be included the qouted rate no extra amount will be paid for this .Make :- Fosroc , Sika , Dr. Fixit . |
| 19 | M&L for chipping off/ taking down the spalled and old concrete from RCC members i.e RCC columns, facias,slab projections ,chajjas on external surface for application of micrococrete upto three storey complete all as specified and directed by Engr-in-Charge . The follwing steps are to be followed -i) Cleaning of rusted bars to be done with wire brushes or sand blasting till complete removal of rust , after this coating of existing reinforcement bars shall be done by applying protective anti-corrosive zinc primer of fosroc or equivalent make with coverage as per technical specifications of manufacturer. ii) Application of epoxy bonding agent on the surface before application of micro-concrete.iii) Mechanical application of micro-cocrete material comprising of 10mm down graded aggregate chips to be mixed in a mechanical slow speed mixer . The mixed material shall be placed immediately in to the position, properly with out any time gap complete for an average thickness 25 mm including finishing the surface even and smooth, complete all as specified and directed by Engrs -In-Charge.Note- i) Work shall be executed by certifed applicator of approved make.ii) Primer , bonding agent and micro- concrete matrial shall be of same make .ii) Cost of scaffolding shall be included the qouted rate no extra amount will be paid for this .Make :- Fosroc , Sika , Dr. Fixit . |
| 20 | Matenal and labour for preparation of newly plastered surface of wall including facias, slab projections and like and applying two coat of first quality premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of Asian Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 tr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over two coat of acrylic water based exterior grade primer @ 0.9ltrundiluted)/10 sq mtrs diluted with water in 1:1ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 Iitr per minute having a pressure of 3300 PSI along with application of exterior wallcare putty of 1mm thickness upto three storey all as specified and directed by engineer in charge .Note :- Allow 6-8 hrs to dry the surface in subsequent coats of primer and distemper and including necessary scaffolding complete all specified and directed by Engr-in-Charge. |
| 21 | Material and labour for preparation of new plastered surfaces of walls etc and applying two coats of 1st quality acrylic distemper(ready mixed) havingVOC content less than 50gms/litre over and including 1mm thick Birla/JK wall care putty to obtain smooth regular/even finish over a coat of primer, complete all as specified and directed. |
| 22 | Material and labour for preparation of new plastered surfaces of ceiling etc and applying two coats of 1st quality acrylic distemper(ready mixed) havingVOC content less than 50gms/litre over and including 1mm thick Birla/JK wall care putty to obtain smooth regular/even finish over a coat of primer, complete all as specified and directed. |
| 23 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each and making good the distured surfaces complete all as specified and directed. |
| 24 | Taking down chowkats or frame with shutter exc 1.50sqm but n.exc 4Sqm each (without taking off shutter from the chowkats) and making good the distured surface complete all as spd and directed |
| 25 | S&F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed by the Engineer-in-Charge |
| 26 | S & F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm,etc complete all as spd and directed. |
| 27 | S & F 35 mm,2nd class hard wood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all as spd and directed. |
| 28 | M&L for Solid PVC Door Frames of size 50mm x 47mm made out of 5mm wood grain PVC sheet reinforced with M.S. Square tube , supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 29 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets used instead of plain color and 5mm thick x 15mm wide PVC shhet eading used inside stiles and rails and decorative pvc beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed. |
| 30 | S & F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staple. |
| 31 | S & F 300 mm long ISI marked mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed by engineer incharge |
| 32 | S & F ISI marked floor door stopper of aluminium alloy body 140 mm cover plate and tounge , anodized with hard drawn steel spring fixed in floor as specified and directed by Engr-in-charge. |
| 33 | S&F 200 mm ISI marked in size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 34 | S&F 250 mm ISI marked in size aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete and fixing clips of sheet cast or extruded sections and fixed complete all as specified and as directed. |
| 35 | S&F 150 mm ISI marked in size aluminium alloy handles , anodised, fabricated type, anodised complete all as specified and as directed. |
| 36 | S&F 100 mm ISI marked in size butt hinges medium weight extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed type B-21 complete all as specified and as directed. |
| 37 | M&L preparing new wood & wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed. |
| 38 | M&L for two coat synthetic enamel paint over a coat red oxide primer on new steel surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F incl taking up and down GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed |
| 40 | Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed . |
| 41 | M&L, Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 42 | S&F in repair Concealed stop cock 15mm bore dia,cast copper alloy, chromium plated screwed down high pressure,with crutch or buterfly handle,screwed both ends for pipes or for unions incl repair to surface to match the existing surface complete all as specified and as directed. |
| 43 | S&F in repair Pillar taps, cast copper alloy but fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 44 | S&F in repair 15mm bib cock,cast copper alloy chromium plated fancy type15mm bore with capstan handle,screwed down,screwed from iron pipe or for brass ferrule, complete all as specified and as directed. |
| 45 | S&F in repair 15 mm bore stop valves/ angle valves fancy type chromium plated screwed dwon high pressure with cruth or butterfly handle for 15 mm dia iron pipe fixed in repairs complete all as directed. |
| 46 | Dismantling of CI/PVC pipe of 75/100mm dia fixed with cement joint fixed to wall / floors all as specified and directed. |
| 47 | S&F PVC (SWR)pipes 110mm dia in any length with rubber ring joint fixed to wall/floor complete all as specified and directed. |
| 48 | S&F PVC (SWR)bends 110mm dia, in any radius, complete all as specified and directed. |
| 49 | S&F in repair 75 mm dia PVC (SWR ) floor trap/ nahani trap with grating, plain with grating including jointing with solvent cement complete all as specified and directed |
| 50 | S&F in repair 110 mm dia PVC (SWR ) floor trap/ nahani trap with grating, plain with grating including jointing with solvent cement complete all as specified and directed |
| 51 | M&L for Providing PCC 1:2:4 type B-1 using 20mm graded crushed stone aggragate as in benching & coping including necessary form work complete all as specified and directed .. |
| 52 | S&F in repairs vitreous china wash down water closet white pedestal pan and trap, including connection to drain ( or out going pipe ) and to flushing pipe, antisyphonage pipe, with plastic water closet sheet cover white , closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified. |
| 53 | S & F in repairs vitreous china squating pan ''Orissa pattern size 580 x 440mm white with integral foot rest (excluding, flushing cistern and flush pipe) squating pan including connection trap and to flushing pipe,anti-syphonage pipe etc complete including making good to floor but including trap set including concrete complete all as specified and directed. |
| 54 | S&F in repair, 10 Litre capacity PVC valveless, syphonic action type,flushing cistern low level ,white, with inlet,ball valve, float ,flush pipe and handle including brackets, 32mm bore PVC flush pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed. |
| 55 | S&F in repairs Vitreous china wash basin white flat back 550 x 400 mm with pedestal , with fitting of PTMT 32 mm dia waste coupling suitable size ,PVC waste pipe ,angle iron brackets with painting of brackets etc complete all as specified and directed. |
| 56 | S&F in repairs Vitreous China urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and Union for discharge pipe including waste pipe and steel urinal spreader complete all as specified.. |
| 57 | S&F in repairs 600 x 450mm bevelled edge mirror or selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 58 | Supplied & fixing steel windows or ventilators, fixedtype, with glazing bars including taking down all as specified and directed by Engr-in-Charge |
| 59 | S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmX25mm double rebated comprises of glazed & gauged skelton shutter (required no of gauged shutter and glazed shutters) including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes,taking down old windows and making good dismantled portion in PCC 1:2:4 type B-1 (Four Nos of each window) including following fitting welded to frame shutter:- Ref Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3(i) Hold fast,150mm long of MS flat iron 12mmX3mm made to shape-04 Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per window (iii) MS Tower bolt 150mm long-02 Nos per window (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per window (v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3 (vii) M S guard bar 08mm square bars @75mm C/C fixed horizontlly. Note : Glass,wiremess and painting shall be measured and paid separately. |
| 60 | S&F 500 Ltr capacity, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling old tank all as specified in SSR Part I. |
| 61 | Material and labour for complete removal of existing treatment from walls by scrapping to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and make good smoothen surface by sand paper after application of wallcare putty of 1mm thickness and applying two coats of first quality Interior acrylic distemper of approved colour over a coat of primer of approved make ,prepare the surface even and smooth all as specified and directed by engineer in charge .Note :- Allow 6-8 hrs to dry the surface in subsequent coats of primer and distemper and including necessary scaffolding complete all specified and directed by Engr-in-Charge. |
| 62 | Material and labour for complete removal of existing treatment from ceiling etc by scrapping to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and make good smoothen surface by sand paper after application of wallcare putty of 1mm thickness and applying two coats of first quality Interior acrylic distemper of approved colour over a coat of primer of approved make ,prepare the surface even and smooth all as specified and directed by engineer in charge .Note :- Allow 6-8 hrs to dry the surface in subsequent coats of primer and distemper and including necessary scaffolding complete all specified and directed by Engr-in-Charge. |
| 63 | Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed. |
| 64 | Material and labour point wiring concealed type with PVC insulated (sheathed) cable 1.5 Sqmm (Nominal area) multy stranded FRLS Copper conductor 1100 volts grade and continous earth wire PVC insulated 1.5 sqmm copper conductor to common earth in and including new PVC conduit chasing and with making good the disturbed surface complete all as specified and directed by Engineer-in-charge for the following |
| 65 | All as per item No. 64 hereinbefore but one light/fan/bell point controlled by one 6 Amp one way switch complete all as specified and directed. |
| 66 | All as per item No. 64 hereinbefore but wiring for one 3 pin 6 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed. |
| 67 | All as per item No 64 hereinbefore but wiring for one 3 pin socket outlet 6 amps independent board complete all as specified and directed. |
| 68 | All as per item No 64 hereinbefore but with 2.5 Sqmm size cable multy stranded FRLS copper wire unsheathed for one 3 pin socket outlet 16 Amp on independent board including continous copper solid conductor connecting to comman earth dolly completed all as specified and directed by Engineer-in-charge |
| 69 | S & F of switch piano flush type single pole one-way 6 Ampere complete all as specified and directed. |
| 70 | S & F of switch piano flush type single pole one-way 16/20 Ampere complete all as specified and directed. |
| 71 | S & F of 6 Ampere socket outlet flush type, multi purpose suitable for 2 and 3 pins (Total 5 Pins) complete all as specified and directed. |
| 72 | S & F of socket outlet two-in-one, 3 pin each suitable for 6 and 16 Ampere flush type with shuttered complete all as specified and directed. |
| 73 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and directed. |
| 74 | Supply and fixing LED tube light fitting 1x20 watts Aluminum housing and milky diffuser with PVC insulated flexible copper cable from ceiling rose to tube light fitting complete all as per specified and directed. |
| 75 | Supply and fixing of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed. |
| 76 | S & F in repair MCB single pole, 240 Volts, AC, B curve, 10 KA, 6 to 32 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed |
| 77 | S & F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 ways including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and as directed including necessary brick work and plaster to match with the existing surface complete all as specified. |
| 78 | Supply and fix single phase propeller type ventilating (Exhaust fan ) AC 230 volts 450 mm sweep, plastic body Heavy duty motor, complete all as per specified and directed. Make : Havells, Crompton , Bajaj, Orient or Equivalent |
| 79 | Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender