Tender For special Repair / Rejuvenation Of Bore Wells And Allied Works At Afa Hyderabad.
Tender Value
49.74 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
2 days left
EMD
99480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair / Rejuvenation Of Bore Wells And Allied Works At Afa Hyderabad.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-Aug-2026 |
| 2 | 22-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply, install, commissioning & testing of Motor Control Panel \\"In-door type\\" of appropriate size / dimensions, factory fabricated CPRI type-tested with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-43 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Aluminium bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming MCCB/MCB rating. The panel board shall be fabricated out of 2 mm thick (for both outer & inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation, necessary earthwork (if any) incl taking down old unsv one complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge with & incl the following accessories : [ For Swimming Pool ] |
| 2 | BUS-BAR & INTERNAL CONNECTIONS :The bus-bars shall be made up of 04 Nos high grade Aluminium 300 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized \\"F\\" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc.PROVISION FOR CABLE ENTRY :The provision for cable entry/exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes.INCOMING :(a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting,suitable for isolation, having breaking capacity 36 KA & of rating 134 to 200 A - 02 Nos. Make : Cat No : DZ4F0200DXD1AOOOO of Make L&T or techno-commercially equivalent of LEGRAND/SIEMENS.(b) COMPACT ENCLOSED ATS (Automatic Transfer Switch) suitable for inside panel mounting & I-O-II operation, 4 Pole, 200 A, confirming to IEC 60947-6-1 - 01 No complete with following features/specifications : (i) Double-Break Contact System offering High Short-time Withstand. (ii) Ample Space for Cable Termination. (iii) Ease of Generator Control (ON-OFF, Cooling Cycle Self-Test). (iv) Cyclic Event Logger.(v) Priority Source Selection. (vi) Adjustable Time Delay (0.1 Sec to 3 Hrs). (vii) Suitable for 3-Phase as well as 1-Phase sources. (viii) Protections - UV/OV, Phase Sequence, Single Phasing, Frequency.(ix) Terminal Shrouds, Phase Barriers & Source Separator etc.Make : Cat No CK90163BSOO of make L&T or techno-commercially equivalent of ABB/Siemens.OUTGOINGS :(a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting,suitable for isolation, having breaking capacity 25 KA & of rating 50-63 A - 04 Nos. Make : Cat No : DZ0F0063CXC1AOOOO of Make L&T or techno-commercially equivalent of LEGRAND/SIEMENS.(b) MCB, TPN, 10KA, 230V, \\"C\\" curve, 06-32 A, ISI marked - 03 Nos (2W + 1S). Make : LEGRAND/ABB/SIEMENS(c) MCB, TP, 10KA, 230V, \\"C\\" curve, 06-32 A, ISI marked - 03 Nos (2W + 1S). Make : LEGRAND/ABB/SIEMENS(d) Three Phase Fully Automatic Star-Delta Starter perfectly suitable for Submersible Pumping Set of capacity upto 15 HP, conforming to IS/IEC : 60947-4-1, with & incl Single Phasing Protection (SPP), Phase Imbalance Protection, Phase Reversal Protection, Short Circuit Protection, FRLS Copper Internal Wiring, Combined or Individual Voltmere & Ammeter, Selector Switch, ON / OFF / TRIP Indications, Star-Delta Timer etc., Class-H Insulation with Contactor Rating AC3 (A) - 16/20A, Overload Relay Range - 13.2A to 20A incl testing complete. Make : BCHSIEMENS/L&T/HAVELLS - 04 Nos (3W + 1S)INSTRUMENTATION SYSTEM :(a) Digital type Multi-Function meter with built in selector Switch & 03 Nos CTs matching with the I/C breaker, Accuracy Class - 1.0, 3 phase, Size 96 x 96 mm - 04 Nos. Make : Cat No WL411010OOOO of make L&T or techno-commercially equivalent of ELMEASURE/SECURE.(b) Indicator lamp with integral circuit (230/240V) & cluster LED (Red, Orange, Blue) - 04 Sets.(c) Danger notice plate of size 20 x 15 cm of 1.6mm thick mild-steel sheet, vitreous enamelled white, with letters, figures and conventioinal skul and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for LT conforming to IS-2551 - 02 Nos (Front & Back). |
| 3 | Supply, install, commissioning & testing of Motor Control Panel \\"Out-door type\\" of appropriate size / dimensions, factory fabricated CPRI type-tested with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Aluminium bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming MCCB/MCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation, necessary earthwork (if any) incl taking down old unsv one complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge with & incl the following accessories : [ IOC Borewell & Receiving Borewell ] |
| 4 | BUS-BAR & INTERNAL CONNECTIONS :The bus-bars shall be made up of 04 Nos high grade Aluminium 100 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized \\"F\\" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc.PROVISION FOR CABLE ENTRY :The provision for cable entry/exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes.INCOMING :(a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting,suitable for isolation, having breaking capacity 25 KA & of rating 50-63 A - 02 Nos. Make : Cat No : DZ0F0063CXC1AOOOO of Make L&T or techno-commercially equivalent of LEGRAND/SIEMENS.(b) Manual On-Load Change-Over Switch, Open Execution Type suitable for inside panel horizontal / vertical mounting, 4 Pole, 125 A, confirming to IS/IEC 60947-3, complete with Terminal Shrouds, Source Separator, Phase Barriers, Extended Handle (if required) & Staggered Terminals - 01 No. Cat No : CO21250OOOO of make L&T or techno-commercially equivalent of ABB/Siemens.OUTGOINGS :(a) MCB, TPN, 10KA, 415V, \\"C\\" curve, 40-63 A, ISI marked - 02 Nos (1W + 1S). Make : LEGRAND/ABB/SIEMENS(b) Three Phase Fully Automatic Star-Delta Starter perfectly suitable for Submersible Pumping Set of capacity upto 15 HP, conforming to IS/IEC : 60947-4-1, with & incl Single Phasing Protection (SPP), Phase Imbalance Protection, Phase Reversal Protection, Short Circuit Protection, FRLS Copper Internal Wiring, Combined or Individual Voltmere & Ammeter, Selector Switch, ON / OFF / TRIP Indications, Star-Delta Timer etc., Class-H Insulation with Contactor Rating AC3 (A) - 16/20A, Overload Relay Range - 13.2A to 20A incl testing complete. Make : BCHSIEMENS/L&T/HAVELLS - 02 Nos (1W + 1S)INSTRUMENTATION SYSTEM :(a) Digital type Multi-Function meter with built in selector Switch & 03 Nos CTs matching with the I/C breaker, Accuracy Class - 1.0, 3 phase, Size 96 x 96 mm - 02 Nos. Make : Cat No WL411010OOOO of make L&T or techno-commercially equivalent of ELMEASURE/SECURE.(b) Indicator lamp with integral circuit (230/240V) & cluster LED (Red, Orange, Blue) - 02 Sets.(c) Danger notice plate of size 20 x 15 cm of 1.6mm thick mild-steel sheet, vitreous enamelled white, with letters, figures and conventioinal skul and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for LT conforming to IS-2551 - 02 Nos (Front & Back). |
| 5 | Supply, install, commissioning & testing of Motor Control Panel \\"In- door type\\" of appropriate size / dimensions, factory fabricated CPRI type-tested with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-43 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Aluminium bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming MCCB/MCB rating. The panel board shall be fabricated out of 2 mm thick (for both outer & inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv one complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge with & incl the following accessories : [ Twin Hanger Borewell ] |
| 6 | BUS-BAR & INTERNAL CONNECTIONS :The bus-bars shall be made up of 04 Nos high grade Aluminium 200 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized \\"F\\" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc.PROVISION FOR CABLE ENTRY :The provision for cable entry/exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes.INCOMING :(a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting,suitable for isolation, having breaking capacity 36 KA & of rating 67 to 100 A - 02 Nos. Make : Cat No : DZ1F0100DXD1AOOOO of Make L&T or techno-commercially equivalent of LEGRAND/SIEMENS.(b) Compact Enclosed ATS (Automatic Transfer Switch) suitable for inside panel mounting & I-O-II operation, 4 Pole, 125 A, confirming to IEC 60947-6-1 - 01 No complete with following features/specifications : (i) Double-Break Contact System offering High Short-time Withstand. (ii) Ample Space for Cable Termination.(iii) Ease of Generator Control (ON-OFF, Cooling Cycle Self-Test). (iv) Cyclic Event Logger. (v) Priority Source Selection. (vi) Adjustable Time Delay (0.1 Sec to 3 Hrs).(vii) Suitable for 3-Phase as well as 1-Phase sources. (viii) Protections - UV/OV, Phase Sequence, Single Phasing, Frequency.(ix) Terminal Shrouds, Phase Barriers & Source Separator etc.Make : Cat No CK90161BSOO of make L&T or techno-commercially equivalent of ABB/Siemens.OUTGOINGS :(a) MCB, TPN, 10KA, 415V, \\"C\\" curve, 40-63 A, ISI marked - 03 Nos (2W + 1S). Make : LEGRAND/ABB/SIEMENS(b) Three Phase Fully Automatic Star-Delta Starter perfectly suitable for Submersible Pumping Set of capacity upto 15 HP, conforming to IS/IEC : 60947-4-1, with & incl Single Phasing Protection (SPP), Phase Imbalance Protection, Phase Reversal Protection, Short Circuit Protection, FRLS Copper Internal Wiring, Combined or Individual Voltmere & Ammeter, Selector Switch, ON / OFF / TRIP Indications, Star-Delta Timer etc., Class-H Insulation with Contactor Rating AC3 (A) - 16/20A, Overload Relay Range - 13.2A to 20A incl testing complete. Make : BCHSIEMENS/L&T/HAVELLS - 03 Nos (2W + 1S)INSTRUMENTATION SYSTEM :(a) Digital type Multi-Function meter with built in selector Switch & 03 Nos CTs matching with the I/C breaker, Accuracy Class - 1.0, 3 phase, Size 96 x 96 mm - 03 Nos. Make : Cat No WL411010OOOO of make L&T or techno-commercially equivalent of ELMEASURE/SECURE.(b) Indicator lamp with integral circuit (230/240V) & cluster LED (Red, Orange, Blue) - 03 Sets.(c) Danger notice plate of size 20 x 15 cm of 1.6mm thick mild-steel sheet, vitreous enamelled white, with letters, figures and conventioinal skul and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for LT conforming to IS-2551 - 02 Nos (Front & Back). Please Enable Macros to View BoQ information |
| 7 | BUS-BAR & INTERNAL CONNECTIONS :The bus-bars shall be made up of 04 Nos high grade Aluminium 200 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized \\"F\\" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc.PROVISION FOR CABLE ENTRY :The provision for cable entry/exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes.INCOMING :(a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting,suitable for isolation, having breaking capacity 36 KA & of rating 67 to 100 A - 02 Nos. Make : Cat No : DZ1F0100DXD1AOOOO of Make L&T or techno-commercially equivalent of LEGRAND/SIEMENS.(b) Compact Enclosed ATS (Automatic Transfer Switch) suitable for inside panel mounting & I-O-II operation, 4 Pole, 125 A, confirming to IEC 60947-6-1 - 01 No complete with following features/specifications : (i) Double-Break Contact System offering High Short-time Withstand. (ii) Ample Space for Cable Termination.(iii) Ease of Generator Control (ON-OFF, Cooling Cycle Self-Test). (iv) Cyclic Event Logger. (v) Priority Source Selection. (vi) Adjustable Time Delay (0.1 Sec to 3 Hrs).(vii) Suitable for 3-Phase as well as 1-Phase sources. (viii) Protections - UV/OV, Phase Sequence, Single Phasing, Frequency.(ix) Terminal Shrouds, Phase Barriers & Source Separator etc.Make : Cat No CK90161BSOO of make L&T or techno-commercially equivalent of ABB/Siemens.OUTGOINGS :(a) MCB, TPN, 10KA, 415V, \\"C\\" curve, 40-63 A, ISI marked - 03 Nos (2W + 1S). Make : LEGRAND/ABB/SIEMENS(b) Three Phase Fully Automatic Star-Delta Starter perfectly suitable for Submersible Pumping Set of capacity upto 15 HP, conforming to IS/IEC : 60947-4-1, with & incl Single Phasing Protection (SPP), Phase Imbalance Protection, Phase Reversal Protection, Short Circuit Protection, FRLS Copper Internal Wiring, Combined or Individual Voltmere & Ammeter, Selector Switch, ON / OFF / TRIP Indications, Star-Delta Timer etc., Class-H Insulation with Contactor Rating AC3 (A) - 16/20A, Overload Relay Range - 13.2A to 20A incl testing complete. Make : BCHSIEMENS/L&T/HAVELLS - 03 Nos (2W + 1S)INSTRUMENTATION SYSTEM :(a) Digital type Multi-Function meter with built in selector Switch & 03 Nos CTs matching with the I/C breaker, Accuracy Class - 1.0, 3 phase, Size 96 x 96 mm - 03 Nos. Make : Cat No WL411010OOOO of make L&T or techno-commercially equivalent of ELMEASURE/SECURE.(b) Indicator lamp with integral circuit (230/240V) & cluster LED (Red, Orange, Blue) - 03 Sets.(c) Danger notice plate of size 20 x 15 cm of 1.6mm thick mild-steel sheet, vitreous enamelled white, with letters, figures and conventioinal skul and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for LT conforming to IS-2551 - 02 Nos (Front & Back). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 27, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender