Tender For Replacement Of Ber Dg Set, Transformer And Other E/M Assets At 7 Afh
Tender Value
91.47 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
28 days left
EMD
1.62 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Ber Dg Set, Transformer And Other E/M Assets At 7 Afh
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5 mtr width and not exce 1.5 mtr in depth in soft/loose soil and getting complete all as specified and as directed. |
| 2 | Removal of excavated material to a disance n.exc 50 mtr and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 3 | Returning, filling in including spreading levelling watering and well ramming in layers n.exc 25 thick for soft/loose soil complete all as specified and as directed. |
| 4 | M&L for sand cushioning /sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed. |
| 5 | M&L bricks with sub class 'B' locally available laid in trenches above sand cushioning for cable protection complete all as specified and as directed. |
| 6 | M&L for XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall / passing through pipe/ pole complete of size 185 Sqmm 3.5 Core complete all as specified and directed. |
| 7 | M&L for XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall / passing through pipe/ pole complete of size 240 Sqmm 3.5 Core complete all as specified and directed. |
| 8 | Supply, install , testing, commissioning of 'Silent type' diesel generating set alongwith having prime power rating of 415 Volts at 1500 RPM , 0.8, 125 KVA lagging power factor at 415 volts suitable for 50 hz 3 phase system and for 0.85 load factor , CPCB-IV plus complied, acoustic enclosure, engine is designed to meet stringent exhaust emission tests as per revised MoEF norms, anti vibration mountings, control panel and foundation. The DG set should be robust in construction factory tested and assembled to ensure perfect alignement of engine and Alternator on a common base frame. The DG set shall be designed and suitable to operate as per tropical condition of Chakeri, kanpura and for more details on service condition refer particular specification. The DG set shall be Eco-friendly product complying with CPCB noise and emission norms (noise and emission values lower than CPCB limits) and complying with latest emmission standards issued vide gazatte notification G.S.R. 804(E) by MoEF The DG set shall be comprising of following item as under:- |
| 9 | (a) Diesel Engine : The diesel engine shall be of four stroke cycle multi-cylinder, direct injection radiator water cooled, turbo charged with after cooler, compression ratio 16.8:1, Air to air after cooling and optimised turbo charger for increased altitude capabilities developing required 103.4 BHP @ 1500 rpm ( MoEF Certified Power) under NTP condition of BS 5514/ISO 3046 with an over load capacity of 110% for one hour in any specified 12 hrs of continuous operation, suitable for generating set application on AMF mode. The engine shall confirm to IS: 10000/BS:649?BS 5514/ISO 3046. The engine shall have the following accessories:(i) Cooling fan and radiator. (ii) DM water cooling systems with pre-mix anti-corrosive additive(iii) Turbocharger (iv) Fly wheel with fly wheel housing. (v) Electrical engine starter motor (disengagement after start-up) with batteries. (vi) Battery charging systems. (vii) Industrial/Residential silencer and exhaust pipes having suitable height with supporting structure. (viii) Stainless steel exhust flexible elbow. (ix) Thermal sealing of exhaust pipe and aluminium cladding for complete exhaust pipe and silencer. (x) Required filters for fuel, lube oil, air etc. (xi) Sets of flexible hoses as required. (xii) Suitable rubber coupling to Alternator with guard. (xiii) Suitable Engine controller for protection of the engine. (xiv) Coolant heater. (xv) Oil drain Pump. (xvi) Heavy duty air cleaner. (xvii) Venturi combo Spin On Oil Filter (xix) Electrical starter motor with soft start engagement feature (xx) Plate type lube oil cooler with first fill of lube oil and coolant. |
| 10 | (b) Engine protections: (i) High coolant temperature warning & trip(ii) Low lubricating oil pressure warning & trip (iii) Low coolant level warning & trip (iv) Fail to crank trip (v) Over crank trip (vi) High and low speed trip (vii) Low or Hgh battery voltage alarms. (viii) Clogged filter warning (ix) Lack of fuel (x) High Canopy Temperature (xi) Set fail to start protection after failure of the set to start after successful three consecutive start attempts. (c) Starting system : The engine starting shall be by means of totally enclosed axial type electric starter suitable for 12 volts DC starting system comprising of starter motor, voltage regulator and arrangement for initial exciation complete 12 volt batteries or with suitable number of batteries 925 plstes, 180 AH Sealed Maintenance Free (SMF) Lead-Acid type)as required as per specifications. The battery shall be supplied with a suitable floor mounted MS stand treated with seven tank treatment, two coats of red oxide/primer & acid resistant paint with wooden base, adaptor box etc. with copper conductor battery leads of required length and socket/clamps(d) Engine mounted Instrumentation Panel fitted with and having digital display for the following: (i) Start stop switch key (ii) water temperatre indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v) Battery charging indication and RPM indication (vi) Over speed indication and Engine hours indication (vii) Low lube oil temp indication. |
| 11 | All as per item No. 8.00, 8.01& 8.02but of capacity 165 KVA. |
| 12 | Supply, installing, testing and commissioning of AC 3 phase 50 cycle per second 160 KVA capacity transformer Level -3 confirming to IS 1180 copper wound step down out door type 11000/433 volts ( at on no load) double wound oil imeresed naturally cooled with internal cooling tubes delta connected on primary ( HV) side and star connected on secondary ( LV) side in accordance with vector symbol Dy-11 ( Vector group IV) with neutral brought on secondary ( LV ) ride and having at (+/-) 2.5%, (+/-) 5% and 7.5% taping to be changed by means of hand operated “ OFF LOAD” tape changing gear. The maximum temp raised should not exceed 45 degree centigrate in oil and 55 degree centrigrate in HV & LV winding when measured by the resistance method after continuous full load run and in imfident temp of 40 degree C . The transformer shall be complete with standard fitting and mainly comprising the following:- (a) One cable box on HV side (primary side) consist of 3 Nos porcelain bushing with studs complete with nut bolts washers glands suitable for reception of HT cable and LV side (secondary side) consist of 4 Nos porcelain bushing with studs made out of copper with nuts and washers and one cable glands suitable for reception of taking out one No 3.5 core LT cable of requested size 1100 volts grade PVC sheathed and PVC insulated armoured heavy duty.(b) Conservator with drain valve and oil level indicator.(c) Dehydrating breather with first fill of dehydrating agent silica gel.(d) Explosive vent. |
| 13 | (e) Thermo meter pocket on tank cover(f) One No 100 mm dia dial type thermo meter vapour pressure type having range –120 degree C with more reading pointer maximum indicator and re-setting device(g) Rating plate with terminal marking(h) Two earthing terminal on tank and tank cover to facilitate fixing of 30x6 mm GI strips(j) Oil level gauge(k) Oil drain and filter valve(l) Lifting lugs/hooks(m) Oil filter hole with cap/plug with connection complete(n) Air relief valve plugs(o) Four plain solid cast steel detachable by directional rollers(p) Extra bushing ;for neutral out side the cable for providing independent earthing for neutral.(q) First filling fresh oil conforming to relevant IS and tested upto 60 KV dielectric strength. |
| 14 | All per item No. 10 &10.01 above but of capacity 400 KVA. |
| 15 | S&F of Cable jointing kit for 11KV (E) grade cable for outdoor heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm complete all as specified and directed. |
| 16 | Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized steel earth strip 25 x 4 mm (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Figure 15A of IS 3043 :1987 incl taking out of existing earthing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 28 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 36 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender