Tender For Repair/ Replacement Of Lt Panel, Junction Boxes, Perimeter Security Lights And Lt Cables And Allied Items At Sunjuwan Under Ge Jammu.
Tender Value
34 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
19 days left
EMD
68000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Lt Panel, Junction Boxes, Perimeter Security Lights And Lt Cables And Allied Items At Sunjuwan Under Ge Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and taking down unserviceable street light fittings LED fittings/ CFL fittings, post top lantern, garden light, Pin/ Holder type from pole or from buildings for repairs including replacement of unserviceable lamp, holder, integral wiring with appropriate gauge copper conductor and refixing the same after repairs in original position properly using PVC insulation tape or where directed complete including replacement of any spares, cable connections from overhead conductors, or from junction boxes to light fitting complete all as specified and as directed.Note: - Spares items such as LED driver and cable etc will be measured and paid separately under respective items. |
| 2 | Dismantling and taking down broken/ damaged PCC/ steel pole complete all as specified and as directed. |
| 3 | Taking down old unserviceable cable complete all as specified and as directed. |
| 4 | Supply and fixing in replacement of the following spare parts in street lights: - |
| 5 | PVC insulated weather proof sheathed aluminium cable 2.5 Sqmm 2 core complete all as specified and as directed. |
| 6 | LED Driver 60 Watt complete all as specified and as directed. |
| 7 | LED Driver 90 Watt complete all as specified and as directed. |
| 8 | LED Driver 100 Watt complete all as specified and as directed. |
| 9 | Supply and fixing in replacement integral LED security light luminaire 90W LED 230 volts made of pressure die cast aluminium housing with high power LED’s lens and toughened glass IP-66 suitable for mounting existing bracket of size 32/40mm dia GI pipe, fixing clamps, bolts, nuts of suitable size as required at site complete all as specified and as directed. |
| 10 | Supply and fixing integral LED security light luminaire 60W LED 230 volts made of pressure die cast aluminium housing with high power LED’s lens and toughened glass IP-66 suitable for mounting existing bracket of size 32/40mm dia GI pipe, fixing clamps, bolts, nuts of suitable size as required at site complete all as specified and as directed. |
| 11 | Supply and fixing integral LED security light luminaire 35W LED 230 volts made of pressure die cast aluminium housing with high power LED’s lens and toughened glass IP-66 suitable for mounting existing bracket of size 32/40mm dia GI pipe, fixing clamps, bolts, nuts of suitable size as required at site complete all as specified and as directed. |
| 12 | Supply and fixing integral LED security flood light luminaire 120W LED 230 volts made of pressure die cast aluminium housing with high power LED’s lens and toughened glass IP-66 suitable for mounting existing bracket of size 32/40mm dia GI pipe, fixing clamps, bolts, nuts of suitable size as required at site complete all as specified and as directed. |
| 13 | Material and labour outdoor type street light junction boxes with PVC water tight encloser, ready made type, with provision of suitable aluminium bus bars for three phases and one neutral mounted on insulators and bus bar having provision of 10 A single pole MCB terminal connection and inter connection of street light from pole to pole and pole to light fittings including necessary PVC insulated weather proof twin core 2.5 Sqmm (nominal area) aluminium conductor cable, 1100 volts grade drawn and including PVC conduit of suitable size with clamps (3 Nos), nuts, bolts etc from junction box to street light connection, including taking down of existing unserviceable of junction box complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Material and labour for steel tubular poles complete with cast iron base plate, finial taper plug, bolt, nuts and screws as specified type 410 SP-31 (9 mtr long) including painting pole with two coats of bituminous paint internally and external embedded portion in ground concrete and painting exposed surface with two coats of aluminium paint over one coat of aluminium paint over one coat of red oxide primer including taking down of existing LT pole of any size and refixing of channel, insulator and electric connection etc complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked as per IS 7098-I laid in trenches ducts or fixing or passing through GI pipe across the road/ path/ drains/ along wall/ floor/ equipment etc. cross sectional area 70 Sqmm 3.5 core with necessary cable lugs, including taking down unserviceable cable complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked as per IS 7098-I laid in trenches ducts or fixing or passing through GI pipe across the road/ path/ drains/ along wall/ floor/ equipment etc. cross sectional area 50 Sqmm 3.5 core with necessary cable lugs, including taking down unserviceable cable complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked as per IS 7098-I laid in trenches ducts or fixing or passing through GI pipe across the road/ path/ drains/ along wall/ floor/ equipment etc. cross sectional area 35 Sqmm 3.5 core with necessary cable lugs, including taking down unserviceable cable complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked as per IS 7098-I laid in trenches ducts or fixing or passing through GI pipe across the road/ path/ drains/ along wall/ floor/ equipment etc. cross sectional area 25 Sqmm 3.5 core with necessary cable lugs, including taking down unserviceable cable complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked as per IS 7098-I laid in trenches ducts or fixing or passing through GI pipe across the road/ path/ drains/ along wall/ floor/ equipment etc. cross sectional area 16 Sqmm 4 core with necessary cable lugs, including taking down unserviceable cable complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Description all as per Ser item No 15.00 here-in-before but 16 Sqmm 2 core complete all as specified and as directed. |
| 21 | Description all as per Ser item No 15.00 here-in-before but 10 Sqmm 2 core complete all as specified and as directed. |
| 22 | Excavation in trenches not exceeding 1.5 mtr wide and exceeding 1.5 mtr in depth for foundation, laying of pipe etc and not exceeding 10 Sqm on plan for manhole etc and getting out in soft/ loose soil complete all as specified and as directed by the Engineer-in-Charge. |
| 23 | Returning, filling in, with approved excavated soil including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Removing excavated material (soils) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Supply and laying dry burnt bricks, sub class ‘B’ old size in cable trenches, as cable protection complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Dry sand cushioning to underground electric cable on layer of 08 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of M.E.S Schedule Part-I complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Material and labour for Cutting/ Boring of road/ Hard standing to a size of 30 cm in width and not exceeding 60 cm in depth for laying of protection pipe/ water line/ Cable including returning filling, including spreading and providing PCC in (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) for the top 100mm layer complete all as specified and as directed by Engineer-in-Charge. |
| 28 | Supply and laying galvanised iron pipe 40mm bore light grade fixed to poles with steel clamps laid under road crossing, fixed to wall etc complete all as specified and as directed by Engineer-in-Charge. |
| 29 | PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundation of pole and filling of mass concrete including providing necessary form work complete all as specified and as directed. |
| 30 | PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping to existing and new poles including necessary form work removing the debris to a distance not exceeding 50m complete all as specified and as directed. |
| 31 | Material and labour for fabrication of sheet metal enclosure, powder coated of Time lite Distribution Boards for automatic switching of street lights internally prewired by using suitable copper lugs including fixing with mild steel clamp 40 x 5 mm to steel/ RCC poles including connection consisting of the following: -(i) ASTRONOMICAL time switch 24 hours operation 240 Volts Cat Part No. TDA45163 of Indo asian or equivalent in makes as specified in Group - I of Appx 'C'.(ii) 3 pole contactor 40 Amps Cat Part No. TL040AB0 of Indoasian or equivalent in makes as specified in Group - I of Appx 'C'.(iii) MCB FP 32 Amps. |
| 32 | Material and labour for street light bracket made out of 32 mm dia GI pipe medium grade 120 cm long cut to size and bend to shape, fixing on poles with flat iron clamps 40mm x 6 mm – 02 sets including nuts, bolts and washers including one coat of aluminium paint over a coat of red oxide primer including taking down of old unserviceable complete all as specified and as directed. |
| 33 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point, 20 mm bore medium grade GI watering pipe, 15mm bore light grade GI protection pipe, PCC chamber with RCC cover, funnel with wire mesh etc including necessary test including taking down of existing earthing on completion complete all as specified and as directed. |
| 34 | Supply and fixing in replacement black epoxy powder coated cone LED Bollard light with die cast aluminium housing, opal diffuser with in built LED 10 Watt CW, IP-65, height 600mm,125mm dia on top complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Supply and fixing in replacement black epoxy powder coated Contemporary UFO type LED Bollard light with die cast aluminium housing, opal diffuser with inbuilt LED 10 Watt CW, IP-65, height 600mm, 125mm dia on top complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Supply and fixing in replacement black epoxy powder coated cubical type LED Bollard light with die cast aluminium housing with in built LED 12 Watt WW, IP-54 complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender