Tender For Special Repair/Replacement To Tech Flt 125 (H) Sqn Hanger Door In Technical Area At Air Force Station Pathankot Under Ge (Af) Pathankot.
Tender Value
2.08 Crore
Estimated cost
Bid Submission
21 Aug 2026
26 days left
EMD
2.83 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Replacement To Tech Flt 125 (H) Sqn Hanger Door In Technical Area At Air Force Station Pathankot Under Ge (Af) Pathankot.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling structural steel work including steel door ,gates, rails etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | Dismantling plain or corrugated steel sheets any gauge , thikness in wall cladding or roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 3 | Excavating over areas, n exc 1.5 m deep and getting out and getting hard and dense soil complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for cement concrete in foundation filling and mass concrete, type D-2 (1:4:8)(using 40 mm graded crushed stone aggregate) complete all as specified and directed by Engineer-in-Charge. |
| 5 | Formwork to sides of concrete foundations, footings, bases of columns, and similar work complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for providing reinforced cement concrete (in M-30 Design Mix) for foundations, including rafts, footings, foundation (using 20 mm graded crushed stone aggregate) complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge. |
| 8 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in hard dense soil complete all as specified and directed by Engineer-in-Charge. |
| 9 | Removing building material exe 1.5km n exc 5 KM and depositing where directed complete all as specified and directed by Engineer-in-Charge. |
| 10 | S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed by Engineer-in-Charge. |
| 11 | S & F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 W (Gde E-250) Quality-A complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for two coats of polyurethane paint to steel surfaces over a coat of red oxide incl preparation of steel surfaces complete all as specified and directed by Engineer-in-Charge. |
| 13 | S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 14 | S&F for 300mm x 100mm bottom wheel with necessary arrangement like MS plate nuts etc to fixing wheel complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F for top wheel of size 185 x 50mm with all necessary arragement like M S Plates, nut, bearing etc complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F for mild steel bolts purpose made with hexagonal or square head one end screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, length and dia of bolt and nut as per site requirement complete all as specified and directed by Engr-in-Charge. |
| 17 | S & F manually operated gear box of capacity of the pushing 10 Ton load with handle, suitable chain and gear to move the gate left and right side the gear box will be fixed on master leaf as per requirement and all as specified and directed by Engr-in-Charge. |
| 18 | Demolition of plain cement concrete/RCC any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer-in-Charge. |
| 19 | Removing demolished material upto a distance exceeding 250m but not exceeding 500m including loading/unloading and spreading at the destinaiton if required/directed by Engr-in-Charge. |
| 20 | M&L for 350mm thick pavement quality concrete work in pavement of flexural strength 45kg/sqcm (lower control limit) in field using min 400 kg of cement per cum with 20mm nominal size of aggregate and super plastisizer if required as per design mix (as per IRC Vth revison) mixed with and including triangular /non circular synthetic fibre reinforcement @ 0.25% by weight of cement with 12mm length, specific gravity 1.34 to 1.4 (other specifications as per IRC/MORTH) spread and compacted manually with vibrator and all as specified and including necessary form work, bull nosing, rounding of edges, finishing by mechanical brooming/belting, curing etc complete all as specified and directed by Engineer-in-Charge. Note: Nothing to be paid over and above 400Kg/Cum. |
| 21 | M&L for forming construction joint 25mm deep and 10mm wide (Using diamond cutter) providing polythene backup rod 12mm dia and sealed with polyurethane sealant (min depth of sealant 12mm) complying with BS 5212,BS 4254, and EN 41875-2003, priming the sides min MAF +/- 30% with ten years performanance guarantee and applying masking tape on edge of joint to prevent accidental spillage of sealant on top surface to give neat finish to sealant and removing tha masking tape after sealant is applied by mechanical means all as shown on drawing,complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire mesh of size 25 mm staples complete all as specified and directed by Engineer-in-Charge. |
| 23 | S & F mild steel framed work such as grills, grating etc With ends of bars shouldered and or riveted, or forged in to spikes, framed guard bars, barred iron doors, ladders,framed blasters, bracing,walkways ,railings, framedworkmof watertanks and similar work to Fe-290 Gde-E-165. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender