Tender For Repair & Maintenance / Replacement Of Security Lights / Garden Light / Post Top Luminaries / Solar Light / Flood Light / Bollard Light / Glow Sign Board Under Ge (W) Mathura
Tender Value
30 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
15 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance / Replacement Of Security Lights / Garden Light / Post Top Luminaries / Solar Light / Flood Light / Bollard Light / Glow Sign Board Under Ge (W) Mathura
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling & taking down unserviceable security light / garden light / flood light / post top light fitting of any Wattage / type from existing location / pole / building from height not more than 8.0 Mtr from ground level complete all as specified and directed by Engineer-in-charge. |
| 2 | Supply & fixing of LED post top lantern in tycoon (Tycoon) shape, 70 Watt, IP -65, Impact resistance - IK07, colour temp- 3000 K, Class I, elegantly designed die-cast aluminum housing with heat sink for efficient thermal management, sturdiness and excellent corrosion resistant. aluminium canopy with classic design to enhance the aesthetic of the fixture, 02 nos die-cast aluminum arms & aluminium die cast spigot provided to support the housing & epoxy powder coated black after phosphochromate treatment, high efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >155 lm/W to ensure better uniformity of light distribution, powered by built-in, isolated potted electronic LED driver with APFC (SMPS based constant current supply) with lower THD, Output Short / Open Circuit protection, Over Voltage protection, Surge Voltage protection upto 10 kV with external SPD & other reliability test as per IS 15885 Part- 2/Sec 13 suitable for pole mounting with outer dia 76 mm with 3 nos allen screws M8x16 mm complete in all respect as specified & as directed. |
| 3 | Supply & fixing of LED security / street light, 90 Watt, IP - 66, Impact resistance - IK07, colour temp- 5700 K, Class I in Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness, excellent corrosion resistant, separate optical and control gear compartment & top opening for easy maintenance. Polyster powder coated grey after phosphochromate treatmentHigh efficiency long life LED modules with SMD LED package mounted on MCPCB. Lumen efficacy of LED >110 lm/W with PC lens to ensure better uniformity of light distribution. Powered by Built-in, Potted electronic LED driver (SMPS based constant current supply) with lower THD, Output Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection upto 10 kV with external SPD & other safety tests as per IS 15885 Part-2/ Sec13. Suitable for bldg/pole mounting alongwith single arm bracket OD 58 mm (max) with suitable reinforcement on wall height complete in all respect & as directed. |
| 4 | Supply & fixing of LED street light, 60 Watt, IP - 66, Impact resistance - IK07, colour temp- 5700 K, Class I in pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness, excellent corrosion resistant, separate optical and control gear compartment & top opening for easy maintenance. Polyster powder coated grey after phosphochromate treatmentHigh efficiency long life LED modules with SMD LED package mounted on MCPCB. Lumen efficacy of LED >110 lm/W with PC lens to ensure better uniformity of light distribution. Powered by Built-in, Potted electronic LED driver (SMPS based constant current supply) with lower THD, Output Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection upto 10 kV with external SPD & other safety tests as per IS 15885 Part-2/ Sec13. Suitable for bldg/pole mounting alongwith single arm bracket OD 58 mm (max) with suitable reinforcement on wall height complete in all respect & as directed. |
| 5 | Supply & fixng of LED security / street light, 45 Watt, IP - 66, Impact resistance - IK07, colour temp- 5700 K, Class I in Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness, excellent corrosion resistant, separate optical and control gear compartment & top opening for easy maintenance. Polyster powder coated grey after phosphochromate treatmentHigh efficiency long life LED modules with SMD LED package mounted on MCPCB. Lumen efficacy of LED >110 lm/W with PC lens to ensure better uniformity of light distribution. Powered by Built-in, Potted electronic LED driver (SMPS based constant current supply) with lower THD, Output Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection upto 10 kV with external SPD & other safety tests as per IS 15885 Part-2/ Sec13. Suitable for bldg/pole mounting alongwith single arm bracket OD 58 mm (max) with suitable reinforcement on wall height complete in all respect & as directed. |
| 6 | Supply & fixing of LED Flood light, 100 Watt, IP - 66, Impact resistance - IK 07, colour temp- 5700 K, Class I in epoxy powder coated die-cast aluminium housing (ADC 12) in grey finish with aesthetically designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. M16 size gland is used for cable entry and provision for loopin-loopout.High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >140 lm/W and viewing angle of120° to ensure better uniformity. PC Lens with Asymmetric/symmetric light distribution and Toughened glass fixed to housing with 06 Nos screws. Integral electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV with built In SPD & other safety test as per IS 15885 Part-2/Sec 13 for wall or surface mounting using adjustable MS cradle of thickness 4 mm with SS angular dial for precise angular mounting of luminaire including neccessary PCC work reqd to make foundation base to install the luminaires complete in all respect & as directed. |
| 7 | Supply & fixing of LED Flood light, 150 Watt, IP - 66, Impact resistance - IK 07, colour temp- 5700 K, Class I in epoxy powder coated die-cast aluminium housing (ADC 12) in grey finish with aesthetically designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. M16 size gland is used for cable entry and provision for loopin-loopout.High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >140 lm/W and viewing angle of120° to ensure better uniformity. PC Lens with Asymmetric/symmetric light distribution and Toughened glass fixed to housing with 06 Nos screws. Integral electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV with built In SPD & other safety test as per IS 15885 Part-2/Sec 13 for wall or surface mounting using adjustable MS cradle of thickness 4 mm with SS angular dial for precise angular mounting of luminaire including neccessary PCC work reqd to make foundation base to install the luminaires complete in all respect & as directed. |
| 8 | Supply & fixing of LED Flood light, 200 Watt, IP - 66, Impact resistance - IK 07, colour temp- 5700 K, Class I in epoxy powder coated die-cast aluminium housing (ADC 12) in grey finish with aesthetically designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. M16 size gland is used for cable entry and provision for loopin-loopout.High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >140 lm/W and viewing angle of120° to ensure better uniformity. PC Lens with Asymmetric/symmetric light distribution and Toughened glass fixed to housing with 06 Nos screws. Integral electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV with built In SPD & other safety test as per IS 15885 Part-2/Sec 13 for wall or surface mounting using adjustable MS cradle of thickness 4 mm with SS angular dial for precise angular mounting of luminaire including neccessary PCC work reqd to make foundation base to install the luminaires complete in all respect & as directed. |
| 9 | Supply & fixing of solar LED post top, 25 Watt with built-in solar panel having high efficiency poly crystalline solar PV modules, made of elegant looking die cast aluminum body with IP 65 protection, colour temp 5700 K, having Lithium battery with expected life of 1000 cycles and backup for 3 days with charge controller and remote control to select 32 lighting mode alongwith anchor fastener/bolt to install the luminaires complete in all respect & as directed. |
| 10 | Supply & fixing of LED gate light, 30 Watt IP 65 die cast aluminium spigot for mounting LED driver and spun aluminium conopy which is painted white inside epoxy powder coated mattle black finish after phosphochromate treatment complete in all respect & as directed. |
| 11 | Supply & fixing of LED decorative gate light 60 watt (Opal type) made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base complete all as specified and directed. |
| 12 | S&F in repair 4 way exterior wall light for decor up down light for outdoor wall for elevation, IP-65 min 12 watt complete all as specified and directed. |
| 13 | S&F in repair 2 way exterior wall light for decor up down light for outdoor wall for elevation, IP-65 min 6 watt complete all as specified and directed. |
| 14 | Supply & fixing of 3 watt surface ground light outdoor type LED rainproof IP 65, input voltage 220-240V, aluminium die cast powder coated, CCT 3000K, confirming to IS 10322 for paths, walls including PCC foundation, conduit pipe and connector for joint etc complete all as specified and directed. |
| 15 | Supply & fixing of LED Spike light 10/12 watt, IP 65 in pressure die cast aluminium housing best suitable for bush lighting complete all as specified and directed |
| 16 | Supply & fixing of LED Bollard light 10watt, IP 65 aesthetically designed landscape luminaire for diffused lighting suitable for architectural outdoor lighting typically giving off light from all sides best suitable to illuminate walkways, steps or pathways complete all as specified and directed. |
| 17 | Supply & fixing in replacement of cast aluminium architectural designer pole of designer leg and broader designer base finished with polyurethane paint (with prior treatments) diameter of approx 88mm, outer dia for spigot entry 75mm, 03 Nos T shaped bolts with nuts & washers provided for concrete foundation, total length of the pole including base and legs (base with plate x 4 Nos legs) is 3100mm (10 feet 2 inch) including J type foundation bolts and neccessary PCC work in (1:2:4) type B0 with curing for 7 days as reqd to install the pole complete in all respect & as directed. |
| 18 | Supply & fixing in replacement of aluminum conductor wire with FRLSH insulated, PVC round sheathed, flexible bright annealed copper conductor cable of size 4.0 Sqmm, 3 core of voltage grade upto 1100 volt as per IS 694/1990 with latest amendments complete in all respect and as directed. |
| 19 | Supply & fixing in replacement of aluminum conductor wire with FRLSH insulated, PVC round sheathed, flexible bright annealed copper conductor cable of size 2.5 Sqmm, 3 core of voltage grade upto 1100 volt as per IS 694/1990 with latest amendments complete in all respect and as directed. |
| 20 | Supply and laying in replacement of Non Metallic Rigid PVC conduit, ISI Marked, conforming to IS 9537, medium grade, size 25 mm dia including all fittings like bends, elbow reducer, junction, coupler boxes, tee bell mouth etc for protection of cables/wires complete in all respect as specified and directed. |
| 21 | Supply and laying in replacement of light grade galvanised iron pipe 25 mm nominal bore dia size confirming to IS 1239-Part I, laid under the road, hard standing or through wall, pole for protection of cable complete all as specified and directed. |
| 22 | Supply & fixing in replacement of worn out MCB enclosure with automatic street light control system with optical Micro Sensor to sense automatic switching ON at dusk (< 60 lux ) and switching OFF at dawn (> 10 lux) with part night operation facility of minimum 4 to 8 Hrs with a resolution of ½ hour, Low voltage / High voltage trip protection and auto reset, operating voltage 150 - 280V AC, 50 HZ with enclosure made of UV stabilized, FR grade special moulding compound to provide a rust proof, electric shock proof, termite proof, outdoor type enclosure of IP 54 protection, MCB of current rating 40 Amps and contactor of rating 25 Amp ( AC 3) suitable to control the load of 5.0 KW, single phase load with necessary clamping arrangements including making incoming and outgoing cable connections complete in all respect and as directed. |
| 23 | Cutting & Chasing required on concrete block/brick wall/path tile /floor etc not exceeding 10 cm girth to concealed the cable/GI wire and making good to disturbed surface with cement mortar (1:3) including facing / finishing where as required to match with existing surfaces complete all as specified and directed. |
| 24 | Supply & fixing LED luminaire 600x600mm, 36W (warm white with temperature 2700K/3000K), 220 Volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed. |
| 25 | Supply & fixing LED luminaire 600x600mm, 36W (warm white with temperature 2700K/3000K), 220 Volts AC mounting type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed. |
| 26 | Supply & fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 27 | Supply & fixing round shape 18 watt 220 volts AC surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 28 | Supply & fixing square shape 18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 29 | Supply & fixing square shape 18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 30 | Supply & fixing in replacement 60 W LED lamp with a unique design, integrating LED technology and motion detector for energy savings detection range 12 m, weather proof IP 55, day light sensing, angle of detection 0-360 degree, min luminous flux 3400 lm complete all as specified and directed. |
| 31 | Supply & fixing in replacement 15 W LED lamp cool light with a unique design, integrating LED technology and motion detector for energy savings detection range 12 m, weather proof IP 55, day light sensing, angle of detection 140 degree, min luminous flux 1100 lm complete all as specified and directed. |
| 32 | Supply & fixing in replacement sheet metal 2 way with MCB SPN 20/25 Amp including bus bar 40 Amp complete for control of external lighting system with connection, testing and commissioning complete all as specified and directed. |
| 33 | Supply & fixing in replacement PVC insulated twin core stranded aluminium sheathed cable of size 2.5 Sqmm complete all as specified and directed. |
| 34 | Supply & fixing in replacement PVC insulated twin core stranded aluminium sheathed cable of size 4.0 Sqmm complete all as specified and directed. |
| 35 | Supply & fixing in replacement PVC insulated twin core stranded aluminium sheathed cable of size 6.0 Sqmm complete all as specified and directed. Please Enable Macros to View BoQ information |
| 36 | Supply & fixing in replacement PVC insulated twin core stranded aluminium sheathed cable of size 6.0 Sqmm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender