Tender For Provn Of Guard Room Near Post No 03 At The 64 Cav Under Age B/R-Iv And Age E/M-Ii Of Ge (South) Meerut Cantt
Tender Value
26.16 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
52300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Guard Room Near Post No 03 At The 64 Cav Under Age B/R-Iv And Age E/M-Ii Of Ge (South) Meerut Cantt
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Aug-2026 | Amendment to critical dates | Date | 18-Aug-2026 |
| 2 | 18-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 2 | Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed. |
| 4 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed. |
| 5 | Treating the top surface of filled earth at the rate of 7.50 litres of emulsion per square metre of surface complete all as specified and directed. |
| 6 | Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed. |
| 7 | Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 8 | Material & labour for approved soil filling under the floor, spreading and levelling in layers n.exc. 25cm thick, well ramming including watering as required complete all as specified and directed. |
| 9 | Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 10 | Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 11 | Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 12 | Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete complete all as specified and directed. |
| 13 | M&L Form work to sides and soffits of beams lintels etc finished rough complete all as specified and directed. |
| 14 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete. complete all as specified and directed. |
| 15 | M&Lfor form work to the edge of concrete flat n. exc 200 mm thick . complete all as specified and directed. |
| 16 | Supply & fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 17 | Supply & fix mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required as in stirrups complete all as specified and directed. |
| 18 | M&L RCC 1:2:4 Tybe B1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 19 | M & L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in Columns, pillars etc complete all as specified and directed. |
| 20 | M & L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specified and directed. |
| 21 | M&L for RCC M 25 type A-1 using 20 mm graded stone aggregate for roof slabs supported on walls, beams and the like complete all as specified and directed. |
| 22 | Material & labour brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed. |
| 23 | Material & labour for brick work with sub class ‘B’ bricks, straight or curved on plan, exc. 6 metre mean radius built in CM(1:4) as in half brick thick walls complete all as specified and directed. |
| 24 | Supply only integral water proofing compound complete all as specified and directed. |
| 25 | Material & labour for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | Material & labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces,in CM(1:4) surface finished even and smooth without using extra cement complete all as specified and directed. |
| 27 | Material & labour for 5 mm thick plaster in CM 1:3 on ceiling surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 28 | M/L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed. |
| 29 | M&L Machine cut kota stone slab flooring 20-25mm thick, as in floors over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and finish including screed bed or bedding layer of mortar 15 mm thick in C M 1:4, complete all as specified and directed. |
| 30 | M&L Machine Kota stone slab 20-25mm thick in riser of steps in skirting, dado and pillar laid jointed with grey cement slurry mixed with pigment to match the shade of the slab and including 15 mm thick plaster CM 1:4 complete all as specified & directed. |
| 31 | M&L joint free Non Skid ceramic plain white tiles 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately). complete all as specified and directed. |
| 32 | Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed. |
| 33 | M&L 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement complete all as specified and directed. |
| 34 | Material & labour for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint with wall care putty over a coat of primer complete all as specified & directed. |
| 35 | Material & labour for preparation of new plastered surfaces of walls with wall care putty and applying two coats of Oil bound distemper to match the existing surfaces as required, complete all as specified & directed. |
| 36 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed. |
| 37 | M&L for padding in PCC 1:2:4 type B0 (using 12.5mm graded stone agg) laid to a minimum consolidated thickness 50mm to provide a finished slope 1:30 complete all as specified and directed. |
| 38 | Material & labour for cleaning of plastered /concrete surfaces and applying priming coat using bituminous primer @ 0.30 Kg/Sqm. followed by evenly a tack coat @ 1.20 Kg/Sqm. using with 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyester reinforced of weight not less than 3.6 Kg/Sqm. unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s instructions and finished top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and finally finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm complete all as specified and directed. |
| 39 | Supply and fix 30 mm thick flush shutter solid core construction with particle board and plywood face panels commercial type on both side complete all as specified and directed. |
| 40 | M&L gauzed shutter shall be made out of angle iron 35x35x5mm, 25x25x5mm and 1.5mm thick as shown on drawing. The frame for shutter shall be of pressed steel and 10mm Square bars grill complete with fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture and 250mm M S sliding bolt , 150mm MS tower bolts and Aluminium 200mm Handle including two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 41 | Supply & fixing pressed steel frames for doors with one or more rebates including necessary fixing lugs lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed. |
| 42 | M & L Steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm complete including hinges, handle tower bolts stops, lugs etc complete all as specified and directed.Note:- (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mangeryas shown on drgs (iii) Guard bars glazing & wire mesh shall be measured & paid for separately. |
| 43 | Supply & fix steel windows or ventilators fixed type, complete all as specified & directed. |
| 44 | Supply & fix mild steel framed work such as grills, gratings guard bar etc with ends of bars shouldered and/ or riveted etc complete all as specified and directed. |
| 45 | Supply & fix 3mm thick sheet glass, pin headed, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed. |
| 46 | Supply & fix galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed. |
| 47 | S&F Flat iron hold fast 25mm x 6mm welded to angle iron door frame as directed by Engr-in-Charge complete all as specified and directed. |
| 48 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (including MS Hold Fast). Note:- For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.' |
| 49 | S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 50 | Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed. |
| 51 | S&F aluminium tower bolts 150mm long, of extruded section. complete all as specified and directed. |
| 52 | Supply & fix Aluminium. Sliding door bolts, plate type, complete, 250mm long complete all as specified and directed. |
| 53 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 54 | Supply and fixing of mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed |
| 55 | S/F in 25 mm bore drapery curtain rods poweder coated finished as directed with fancy type incl fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 56 | M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 57 | M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 58 | Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed. |
| 59 | S&F for 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed. |
| 60 | Supply and fix PVC bends 110mm bore, any radius complete all as specified & directed. |
| 61 | S&F 20mm Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed. complete all as specified and directed. |
| 62 | Supply & fix bib taps cast copper alloy chromium plated with crutch or butterfly handle with long shank screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed. |
| 63 | Supply & fix in vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed. |
| 64 | Supply & fix angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed. |
| 65 | Supply & fix rotational moulded polyethylene water storage tanks 500 liters capacity, three layered (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including dismantling existing water tanks complete all as specified & directed. |
| 66 | Supply & fix in PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed. |
| 67 | Supply & fix 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 68 | Supply & fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 69 | Supply & fix 3mm thick sheet glass, ordinary quality, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed. |
| 70 | Supply & fix butt hinges, 100 mm long of stainless steel, complete all as specified & directed. |
| 71 | Supply & fix in PVC connections of 450mm long of 15mm dia iron pipe including PTMT nuts complete all as specified & directed. |
| 72 | Supply & fix PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed. |
| 73 | Supply & fix vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with, integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed. |
| 74 | Supply & fix in vitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified and directed. |
| 75 | Supply & fix pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed. |
| 76 | S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed. |
| 77 | S&F waste coupling of PTMT (half or full threaded) suitable for urinals (Minimum weight 32mm-45gms) complete all as specified and directed. |
| 78 | S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 79 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 80 | PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore complete all as specified and directed. |
| 81 | S&F 600mmx750mm fancy type bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 82 | S&F corner glass shelf of size 300mm stainless steel railing complete all as specified and directed. |
| 83 | S&F glass shelf rectangular of size 450mm with stainless steel railing complete all as specified and directed. |
| 84 | S&F stainless steel tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 85 | M&L Concrete bed to drain pipes 150mm, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) Type D-2. complete all as specified and directed. |
| 86 | M&L Slat-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed complete all as specified and directed. |
| 87 | M&L Cement concrete in foundations, filling and mass-concrete in PCC 1:4:8 Type D-2 (using 40 mm graded stone aggregate). complete all as specified and directed. |
| 88 | M&L Rendring 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed. |
| 89 | M&L PCC(1:3:6) type C1 as in benching to man hole complete all as specified and directed. |
| 90 | Septic tanks, exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 100 users. complete all as specified and directed. |
| 91 | Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 3.00M dia X 4.50M deep. complete all as specified and directed. |
| 92 | M&L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed. |
| 93 | M&L Machine pressed precast concrete interlocking coloured paver block with grey cement and with pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. |
| 94 | M&L Sand for cushioning, interlocking tiles joint to be filled with sand, including spreading and levelling in layers n exc 25 mm thick. complete all as specified and directed. |
| 95 | S&F Providing and laying at or near ground level factory made kerb stone of nominal mix (1:2:4) cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 96 | M&L PCC 1:3:6 type C1 (using 20 mm graded aggregate) as in bed block, copings, kneelers, apex stones, bed plates, water troughs and the like including cutting into bricks of stone wall as reqd for inserting hold fasts complete all as specified and directed. |
| 97 | Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 PVC insulated, unsheathed copper conductor cable in and including PVC surface conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3.0 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :- (a) One Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps. |
| 98 | All as per item No 103.00 here-in-before but One ceiling fan/ Exhaust Fan point controlled by one, one way switch 05 / 06 Amps. |
| 99 | All as per item No 103.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. |
| 100 | All as per item No 103.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. |
| 101 | All as per item No 103.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. |
| 102 | Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed. |
| 103 | Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed. |
| 104 | Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed. |
| 105 | Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed. . |
| 106 | Supply and fixing lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 10 watt. complete all as specified and directed. |
| 107 | Supply and fixing of decorative LED Tube light fitting 1x20 Watt , environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate LED tube-01 No, with batten and all accessories complete all as specified and directed. |
| 108 | S & Fixing LED Light fitting 1x9 / 1x10 watt with driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed. |
| 109 | Supply & fixing of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified and directed. |
| 110 | Supply and fixing new ceiling fans complete with blades, down rods, electronic regulator compatible for BLDC fans and ccessories, 230 V, 1200 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with remote brushless direct current motor ( BLDC.) complete all as specified and directed. |
| 111 | Supply and fixing new exhaust fan steel body AC single phase 230 V of size 300mm sweep with blade , frame and lauvers complete all as specified and directed. |
| 112 | Supply and fixing sheet metal enclosure , single pole and neutral, AC, 230 volts, 08 way, with 200 Amps rated complete all as specified and directed. |
| 113 | Supply & fixing MCB SPN, AC, 240 volts of 32 Amps, C curve, 10 kA, complete all as specified and directed. |
| 114 | Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA, complete all as specified and directed. |
| 115 | Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty. complete all as specified and directed. |
| 116 | Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed. |
| 117 | M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified and directed. |
| 118 | Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete |
| 119 | Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including making connections with flexible twisted copper wire of size 23/0.000076 with security light bracket fitting made out of 32 mm dia GI pipe medium grade upto 0.9 Mtr long including all acceessores. complete all as specified and directed. |
| 120 | Supply and fix desert cooler electric driven single phase 230 Volt metallic body (GI) , thickness not less than 1.5mm capacity of water not less than 90 Ltr , 1440 RPM with copper winding Exhaust moter and power consumption not more than 240 watt, 50 Hz with iron stand complete all as specified and directed. |
| 121 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 25, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender