Tender For special Repair To Boundary Wall From Post E-7 To E-8,E-5 To E-6,E-10 To E-11,Guard Post 17 To 18 And Certain Patches Of Birpur At Ratnuchak Mil Stn Under Ge Kaluchak
Tender Value
47.38 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
16 days left
EMD
94800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kaluchak → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Boundary Wall From Post E-7 To E-8,E-5 To E-6,E-10 To E-11,Guard Post 17 To 18 And Certain Patches Of Birpur At Ratnuchak Mil Stn Under Ge Kaluchak
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick work or stone boulder masonary built in cement mortar complete all as specified and directed. |
| 2 | M&L brick work with Fly ash old size bricks,having crusing strenght n.less than 100 Kg/cm2 straight or curved plan exc 6 m mean radius built in CM 1:6 as in walls etc complete all as specified and directed. |
| 3 | M&L Brickwork using old bricks obtained from demolition straight or curved on plan exc 6 m mean radius built in CM 1:4 as in walls etc. using old bricks obtained from demolition complete all as specified and directed. |
| 4 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. |
| 5 | Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 6 | M&L PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed. |
| 7 | Supply & fixed in repairs Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed. |
| 8 | M&L Restraining and resecuring Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings including making good staples etc complete all as specified and directed. |
| 9 | M& L for hand rails, half round or others stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts brackets etc in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for secuing wire mesh etc.,) including all necessary drilling, bolting or reveting etc., and similar work confirming to FE-290 Gde E-165 complete all as specified and directed. |
| 10 | M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc in CM 1:4 incl finished the surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 11 | M&L 15 mm thick rendering other than fair faces of brick work of walls etc in CM 1:4 incl finished the surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 12 | M&L Preparation new plastered surfaces of walls and applying two coats of cement base paint over one coat of primer. complete all as specified and directed. |
| 13 | M&L for two coats synthetic enamel paint over a coat of red oxide primer on newly steel surfaces complete all as specified and as directed. |
| 14 | M&L cement concrete type C2 (1:3:6) 40mm graded aggregate) in foundation, filling and mass concrete. complete all as specified and directed. |
| 15 | M&L Form work to side pillars, post, strut, pier, columns and similar works square or rectangular rough finished flat surfaces to concrete. complete all as specified and directed. |
| 16 | M&L of RCC M-25 (design mix) as Columns,pillars, piers,posts and struts and similer work complete all as specified and as directed. |
| 17 | M&L Use and waste of steel form work to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels, cantilevers, shelves including SllP~portsloverhans, etc. also splays between floors andbeams, etc. complete. for rough finished surfaces complete all as specified and directed. |
| 18 | M&L for reinforced cement concrete Design Mix M-25 as in roof beams, cantilevers, breassummers and lintels over 1.5m span complete all as specified and directed. |
| 19 | Demolition of reinforced cement concrete of any description not otherwise specifically provided for (reiforcement cut to facilitate demolition) complete complete all as specified and directed. |
| 20 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia) or securing with clips complete all as specified and directed. |
| 21 | M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in strirrups, spaces and binder and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed. |
| 22 | S&F concertina coil of 610 mm diameter made out of 2.6mm dia spring steel wire230 gm/m2 (Min) dipped with corosion preventive fluid (rusilo 901) including white colour each coil having a minimum 50 turns(circles) and an average weight of not less than 8.57 Kg including handle and spike at both end of coil erected in position on tip of mild steel angle by fixing with GI clip for securing including necessary welding the MS section and as per manufactures instruction complete all as specified and directed. |
| 23 | Dismantling of concentina coil fencing any type complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender