Tender For Repair / Maintenance Including Denting Painting, Polishing And Re-Canning Of Various Wooden Furniture At Af Station Under Ge (Af) Jamnagar No.2
Tender Value
45 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
18 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Including Denting Painting, Polishing And Re-Canning Of Various Wooden Furniture At Af Station Under Ge (Af) Jamnagar No.2
BOQ
| Sl. No. | Item Description |
| 1 | Removing following old and unserviceable parts / components of “BED PLYWOOD TOP” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 246, 247) |
| 2 | Head rest complete of size and specification as per drawing. |
| 3 | Foot rest complete of size and specification as per drawing. |
| 4 | Plywood top with 12 mm thick BWR commercial . |
| 5 | Long rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 6 | Short rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 7 | Both side veneered of Head Rest of size and specification as per drawing. |
| 8 | Both side veneered of Foot Rest of size and specification as per drawing. |
| 9 | Removing following old and unserviceable parts / components of “CHAIR DINING with cushioned ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/04) |
| 10 | Front leg made out of teakwood of size and specification as per drawing. |
| 11 | Rear leg made out of teakwood of size and specification as per drawing. |
| 12 | Bottom stiffener long first class hard wood (teak wood) of size and specification as per drawing. |
| 13 | Bottom stiffener short first class hard wood (teak wood) of size and specification as per drawing. |
| 14 | Seat/Back from members front, back side for chair as per drawing |
| 15 | Horizontal back stiffner first class hard wood (teak wood) of size and specification as per drawing. |
| 16 | Complete seat made out of 75 mm thick 32 density foam with 6 mm thick plywood base, upholstered with tapestry as directed by Engineer-in-charge. |
| 17 | Removing following old and unserviceable parts / components of “CHAIR EASY” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-229) |
| 18 | Front / Rear legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 19 | Arm rest made of first class hard wood (teak wood) of size and specification as per drawing. |
| 20 | Seat Front / Rear / side rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 21 | Back Upper / bottom rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 22 | Removing following old and unserviceable parts / components of “CHAIR DINING ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge.(Drg No FD-279, FD/MAP-II/05) |
| 23 | Front legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 24 | Rear legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 25 | long / short rail of seat made of first class hard wood (teak wood) of size and specification as per drawing. |
| 26 | Stiffener of back made of first class hard wood (teak wood) of size and specification as per drawing. |
| 27 | Short & long stiffener of bottom made of first class hard wood (teak wood) of size and specification as per drawing. |
| 28 | Complete seat made out of 4mm thick PVC with holes and screwed with frame as per drawing directed by Engineer-in-charge (FD/MAP-II/05). |
| 29 | Removing following old and unserviceable parts / components of “CHAIR WRITING ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-250, 280, 285) |
| 30 | Front legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 31 | Rear legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 32 | Front / Rear / Side rail of seat made of first class hard wood (Teak wood) of size and specification as per drawing. |
| 33 | Stiffener of Back made of first class hard wood (Teak wood) of size and specification as per drawing. |
| 34 | Short / long stiffener of bottom made of first class hard wood (Teak wood) of size and specification as per drawing. |
| 35 | Arm rest made of first class hard wood (teak wood) of size and specification as per drawing. |
| 36 | M&L for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-In-Charge. |
| 37 | Removing following old and unserviceable parts / components of “PEG TABLE” and S&F new parts / components of same size, existing pattern with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-236 & 277) |
| 38 | Removing old u/s tops from peg table and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 39 | Legs of first class hard wood (teak wood) of size and specification as per drawing. |
| 40 | Short rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 41 | Long rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 42 | Bottom stiffner long and short of first class hard wood (teak wood) of size and specification as per drawing. |
| 43 | Removing following old and unserviceable parts / components of “REPAIRS TO HAT STAND WITH MIRROR” and S & F new parts / components of same size, existing pattern and same material, with beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-233) |
| 44 | 5 mm thick looking mirror of size and specification as per drawing. |
| 45 | 3 mm thick Veneered plywood of size and specification as per drawing. |
| 46 | 9 mm thick Back Plywood of size and specification as per drawing. |
| 47 | Aluminium Peg of size and specification as per drawing. |
| 48 | Repairs to Sofa set 3 Seater by Replacing of unsv seat / back cushion foam with tapestry cloth/rexin/leatherite and other aceesories what so ever required as per existing pattern/structure and sample approved by Engr - in - Charge. (Drg No. HOF/Godrej/Durian/TP) |
| 49 | Repairs to Sofa set 1 Seater by Replacing of unsv seat / back cushion foam with tapestry cloth/rexin/leatherite and other aceesories what so ever required as per existing pattern/structure and sample approved by Engr - in - Charge. (Drg No. HOF/Godrej/Durian/TP) |
| 50 | Removing following old and unserviceable parts / components of “SOFA 1 & 3 SEATER” and S & F new parts / components of same size, existing pattern and same material, with beading, screw,etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373) |
| 51 | Arms made out of teakwood of size and specification as per drawing. |
| 52 | Front leg made out of teakwood of size and specification as per drawing. |
| 53 | Rear leg made out of teakwood of size and specification as per drawing. |
| 54 | Batten for seat and back made out of teak wood of size and specification as per drawing. |
| 55 | Long rail for 3 seater made out of teakwood of size and specification as per drawing. |
| 56 | Long rail for 1 seater made out of teakwood of size and specification as per drawing. |
| 57 | Short rail made out of teakwood of size and specification as per drawing. |
| 58 | M&L for replacement of old u/s seat/back cushions, S&F new foam cushion of size 21''x20''x100mm thick, 40 density (Make: Sleepwell/kurlon) all as specified and directed. |
| 59 | M&L for replacement of old u/s tapestry cloth of seat/back cushion, S&F new tapestry cloth of approved quality/colou/texture (Cost of tapestry shall not be less than Rs.260/- per metre) all as specified and directed. |
| 60 | Removing following old and unserviceable parts / components of “TABLE CENTRE” and S & F new parts / components of same size, existing pattern , same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-235 & 274) |
| 61 | Removing old u/s tops from Table centre and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 62 | Legs of first class hard wood (teak wood) of size and specification as per drawing. |
| 63 | Short rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 64 | Long rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 65 | Short stiffner at bottom of first class hard wood (teak wood) of size and specification as per drawing. |
| 66 | Removing following old and unserviceable parts / components of “TABLE DINING 4 PERSON 1200mm x 900mm ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. Drg No FD/E6/MAP/03,FD-239 & 273) |
| 67 | Removing old u/s tops from Table dining and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 68 | Legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 69 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 70 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 71 | Removing following old and unserviceable parts / components of “TABLE DINING 6 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/03,FD-239 & 273) |
| 72 | Removing old u/s tops from Table dining and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 73 | Legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 74 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 75 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 76 | Removing following old and unserviceable parts / components of “TABLE DINING 8 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-30,239,273,376) |
| 77 | Removing old u/s tops from Table dining and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 78 | Legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 79 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 80 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 81 | Removing following old and unserviceable parts / components of “TABLE DRESSING GENTS WITH MIRROR (MAP)” and S&F new parts / components of same size, existing pattern same texture to match with existing, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/16) |
| 82 | 5 mm thick Looking Mirror with complete frame of hard wood for mirror and specification as per drawing. |
| 83 | 06mm thick ply wood at the back with completer frame of first class hard wood (teak wood) of size and specification as per drawing. |
| 84 | Steel Hinges 75mm long of size and specification as per drawing. |
| 85 | Glass shelves 5mm thick supported on runner/ glass holder of size and specification as per drawing. |
| 86 | Magnetic catcher of size and specification as per drawing. |
| 87 | Removing following old and unserviceable parts / components of “Table DRESSING LADIES WITH STOOL (MAP)” and S&F new parts / components of same size, existing pattern same texture to match with existing, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/07) |
| 88 | 6 mm thick plywood for mirror and specification as per drawing. |
| 89 | 5 mm thick Looking Mirror and specification as per drawing. |
| 90 | 18mm thick pre-laminated particle board top & bottom all as per drawing |
| 91 | 18mm thick pre-laminated particle board for side as per drawing |
| 92 | Complete drawer made out of 12 mm thick plywood of size and specification as per drawing. |
| 93 | Knob 40mm dia as per drg |
| 94 | Shutters made out of 18 mm thick pre-laminated plywood board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. |
| 95 | Repairs to Stool dressing by Replacing of unsv seat of cushion foam with tapestry cloth and other accessories what so ever required as per existing pattern/structure and sample approved by Engr - in - Charge. |
| 96 | Repairs to Stool dressing by what so ever required as per existing pattern/structure and sample approved by Engr - in - Charge. |
| 97 | Removing the U/S Castor wheel and S&F of new castor wheel as per drg. |
| 98 | Removing following old and unserviceable parts / components of “TEAPOY WOODEN” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-232 & 278) |
| 99 | Removing old u/s tops from Teapoy wooden and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 100 | Legs of first class hard wood (teak wood) of size and specification as per drawing. |
| 101 | Short rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 102 | Long rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 103 | Short stiffner at bottom of first class hard wood (teak wood) of size and specification as per drawing. |
| 104 | Removing following old and unserviceable parts / components of “Table DRESSING GENTS WITH MIRROR FD ” and S&F new parts / components of same size, existing pattern same texture to match with existing, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-230,379) |
| 105 | 5 mm thick Looking Mirror with complete frame of hard wood for mirror and specification as per drawing. |
| 106 | 06mm thick ply wood at the back with completer frame of first class hard wood (teak wood) of size and specification as per drawing. |
| 107 | 12mm thick pre-laminated particle board top & bottom all as per drg |
| 108 | 12mm thick pre-laminated particle board for side all as per drg |
| 109 | Complete drawer made out of 12 mm thick plywood of size and specification as per drawing. |
| 110 | Knob 40mm dia as per drg |
| 111 | Removing following old and unserviceable parts / components of “Table DRESSING LADIES FD” and S&F new parts / components of same size, existing pattern same texture to match with existing, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 251,378) |
| 112 | 5mm thick Looking Mirror with complete frame of hard wood for mirror and specification as per drawing. |
| 113 | 06mm thick ply wood at the back with completer frame of first class hard wood (teak wood) of size and specification as per drawing. |
| 114 | 18mm thick pre-laminated particle board top & bottom all as per drawing |
| 115 | 18mm thick pre-laminated particle board for side all as per drg |
| 116 | Complete drawer made out of 12 mm thick plywood of size and specification as per drawing. |
| 117 | Knob 40mm dia as per drg |
| 118 | Aluminium channel for glass as per drg |
| 119 | Plain glass as per size and drg |
| 120 | Removing following old and unserviceable parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-41, 224, 283) |
| 121 | Removing of old u/s top of table 3 x 2 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. |
| 122 | Leg made of first class hard wood (teak wood) of size and specification as per drawing. |
| 123 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 124 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 125 | Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 126 | Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 127 | Complete drawer made out of 12 mm thick plywood of size and specification as per drawing. |
| 128 | Knob 40mm dia as per drg |
| 129 | Removing following old and unserviceable parts / components of “TABLE 3' x 3' WOODEN” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-88 M, 291) |
| 130 | Removing of old u/s top of table 3 x 3 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. |
| 131 | Leg made of first class hard wood (teak wood) of size and specification as per drawing. |
| 132 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 133 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 134 | Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 135 | Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 136 | Removing following old and unserviceable parts / components of “TABLE WRITING (STUDY) ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-33 & 275, 249) |
| 137 | Top made out of 18 mm thick pre-laminated plywood board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. |
| 138 | Legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 139 | Complete drawer made out of 12 mm thick plywood of size and specification as per drawing. |
| 140 | Shutters made out of 18 mm thick pre-laminated plywood board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. |
| 141 | Removing following old and unserviceable parts / components of “ SIDE BOARD” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-26 (M) / 371) |
| 142 | Back made out of 4 mm thick plywood. |
| 143 | Removing old u/s door from Side board and S&F new door made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 144 | Top with 18mm Particle board with PVC beadding |
| 145 | Drawer made all as per existing drg. |
| 146 | Side Ply as per existing drg |
| 147 | Bottom of side board as per existing drg |
| 148 | 100 mm size Aluminium hasp & staple. |
| 149 | Knob 40mm dia |
| 150 | Removing following old and unserviceable parts / components of “TABLE BED SIDE ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 276 ) |
| 151 | Back of 6 mm thick commercial face plywood. |
| 152 | side (right & left) made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) all as specified in drg as directed by Engr-in-charge. |
| 153 | Top / middle shelf all as per items ser No 20.02 |
| 154 | Fixing of dressing mirror on wall with plastic gutty and codmium plated screw complete all as shown in drawing and as directed by engr in charge.all as shown on drawing & as directed by Engineer-in-charge. Drg No. NO.FD/E6/MAP/16.Note :- (i) This item shall be executed at Domestic area (SMQ & OMQ Accn) at AF Station Jamnagar.(ii).Dressing Mirror will be provided by the user. |
| 155 | S & F wooden bracket made of first class hard wood (Teak wood) for all type of wooden furniture fixed with 2 Nos screw and duly polishing to match with existing complete as direction by Engr-in-charg. |
| 156 | S & F of PVC shoe/Ring for all type of wooden furniture fixed with suitable screws as direction by Engr-in-charg. |
| 157 | M&L for preparation of old polished surface of following wooden furniture article by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish as directed by Engr-in-Charge :- |
| 158 | Bed plywood (FD-246 & 247) |
| 159 | Chair dining (FD- 279 & FD/MAP-II/05) |
| 160 | Chair Dining (FD/MAP-II/04) |
| 161 | Chair dining long back (FD-357 ) |
| 162 | Chair easy (FD-229) |
| 163 | Chair writing (FD 250 & 280) |
| 164 | Hat stand with mirror (FD-233 & 362) |
| 165 | Peg table (FD- 236 & 277) |
| 166 | Sofa set single seater (FD-281,TP) |
| 167 | Sofa set 3 seater (FD-258, 281, 373& TP) |
| 168 | Table dining for 4 persons (Drg No - FD 139 (M), 289) |
| 169 | Table dining for 6 persons (Drg No - FD 239, 273) |
| 170 | Table dining for 8 persons (Drg No - FD 239, 273) |
| 171 | Table writing (Drg No - FD 249,275) |
| 172 | Table centre (Drg No - FD-274) |
| 173 | Table dressing gents with mirror (Drg No - FD 238, FD/E6/MAP/16) |
| 174 | Table dressing ladies with mirror (Drg No - FD 378,251 FD/MAP-II/07 ) |
| 175 | Teapoy (Drg No - FD-232,278) |
| 176 | Table 900 x 600 x 760 w/o drawer (Drg No - FD 223,224,283) |
| 177 | Table 900x600x760mm with drawer (Drg No - FD 223,224,283) |
| 178 | Bin Soiled (Drg No - FD/E6/MAP/09) |
| 179 | Table dressing gents with mirror (Drg No - FD/E6/MAP/16) |
| 180 | Table dressing ladies with mirror (Drg No - FD/MAP-II/07 ) |
| 181 | Table 900 x 900 (Drg No FD-291) |
| 182 | Side Board (Drg No FD-26 (M) / 371) |
| 183 | Table bed side Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender