Tender For Repair/Maint Of Roof Treatment, Sanitary, Plumbing And Other Misc B/R Works At Zone Iii At Lansdowne
Tender Value
14.84 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
21 days left
EMD
29680
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Roof Treatment, Sanitary, Plumbing And Other Misc B/R Works At Zone Iii At Lansdowne
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises from MoD land complete all as specified and as directed. |
| 2 | M & L Non skid light colour ceramic tiles of any design and pattern 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6. finished fair and even for laying floor finishes/tiles etc complete all as specified and directed. Tiles shall be conforming to IS-15622-2006, Group B II with average water absorption between 3% to 6% length, width and strightness of sides +0.10% (Max deviation). thickness + 5.0% (Max deviation). Centre & edge curvature and warpage +0.50% (Max deviation). breaking strength 1000N (Minimum) and minimum 95% tiles shall be free from visible defects. Note :- Shade of the tiles including colour, design and pattern shall be approved by AGE (I) |
| 3 | S & F glazed ceramic coloured tiles of size 450mm x300mmx 8 to 9mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick cement plaster in CM (1:4) all as specified and directed by Engineer-in-charge. Tiles shall be confirming to IS-15622-2017, Group B III with average water absorption between 10% to 15% length, width and strightness of sides +0.20% (Max deviation) Thickness + 4.0% (Max deviation) straightness of sides and rectangularity +0.15% (Max deviation) surface flatness +0.22% (max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects. Note :- Shade of the tiles including colour, design and pattern shall be approved by AGE (I) |
| 4 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of rubbish out side MOD land complete all as specified and directed. |
| 5 | Dismantling of PVC /cast iron pipes of following bore of pipe, set in cement mortar in sunken floor slab complete all as specified and as directed:- |
| 6 | 75/100mm bore |
| 7 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/ floor of following size complete all as specified and as directed :- |
| 8 | 110 mm bore |
| 9 | 75 mm bore |
| 10 | S&F PVC (SWR) bends any radius including necessary cutting in brick wall and making good to match with existing surface of following size complete all as specified and as directed :- |
| 11 | 110 mm bore |
| 12 | 75 mm bore |
| 13 | S&F PVC (SWR) junction single, (single T) equal or unequal of following size complete all as specified and as directed :- |
| 14 | 110 mm bore |
| 15 | S&F PVC (SWR)branch piece, single (single Y) equal or unequal of following size complete all as specified and as directed :- |
| 16 | 110 mm bore |
| 17 | 75 mm bore |
| 18 | S&F in repair vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed. |
| 19 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic seat and cover, white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc complete all as specified and directed. |
| 20 | S&F in repair PVC valveless, syphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia complete all as specified & directed. |
| 21 | M&L for PCC (1:5:10) Type E2 (using 40 mm graded stone aggre-gate) as in foundations, sunken portion filling and mass-concrete complete all as specified and directed. |
| 22 | M&L for two coat of acrylic polymer modified cementitious flexible waterproof of 1 mm with minimum elongation of 100% after base preparation by cleaning, brushing and removal of flaky materials. The coatings shall be applied at intervals and as per the manufacturer’s specifications and approved by Engineer in Charge complete all as specified and directed.Note : Ponding test :- After water proofing coating, ponding test willl be done for ponding for 48 Hrs. |
| 23 | M&L for 15mm thick protection plaster in CM (1:4) as in floor and wall till floor level with water proof mixed with liquid polymer @1.5 ltr per 50 kg bag of cement complete all as specified and directed. Note :- WPC will be measured and paid seperately. |
| 24 | Supply only liquid water proofing compound (ISI) marked complete all as specified and directed. |
| 25 | M&L for 40mm dia GI pipe, medium grade, as in spout pipe, projecting at least 150 mm beyond outer face of wall including making hole for fixing in sunken beam or brick wall complete all as specified and as directed. |
| 26 | M & L for 25mm thick, PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bottom of sunken/ sub base admixed with liquid WPC and finishing cement concrete surface even and smooth complete all as specified and directed. |
| 27 | Supply only 32 mm bore PVC flush pipe low or high density polythene pipe for low level flushing cistern complete all as specified and as directed. |
| 28 | S&F in repair 100 mm bore cast iron floor trap with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1, complete all as specified & directed. |
| 29 | Removal of existing roof treatment i.e APP membrane, brick tiling incl mud mortar and open up RCC roof slab including demolition of PCC/Plaster including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance , scales, oil or any other loose material complete all as specified and directed.Note :- The work is required to be carried out at non-accessible roof for double storey . The contractor shall make arrangement of scoffolding,safety & security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items . |
| 30 | M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in padding over RCC roof and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 31 | M&L for 15mm screed bed or bedding layer in cement mortar 1:4 mixed with WPC as per manufacturer's instructions over RCC Slab horizontal or vertical portion for laying water proofing treatment complete all as specified & directed. Note : WPC/Liquid shall be measured and paid seperately) |
| 32 | M&L of water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane as per manufacturer’s instructions with following course of description below :- (a) Applying a priming coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m, till the surface is properly impregnated.(b) Providing APP based 5 layer polymeric membrane minimum weighing 3.0 Kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core, laid on primed surface by forced applications as per the manufacturer's instructions with side over lap of 75 mm and end overlap of 100 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch ) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer(c) Apply two coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membranceNote : 1. The work of water proofing treatment shall be got executed through authorised applicator of the manufacturer only and 10 year company back warranty to be submitted by contractor 2. The work is required to be carried out at non-accessible roof slab for double storeyed. The contractor shall make arrangement of scaffolding, safety and security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items.) |
| 33 | Disconnecting existing 500 ltr tanks, setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes and hoisting if required reconnecting and re-fixing in position including mention date of cleaning in tank with white/ black paint complete all as specified and directed. |
| 34 | Disconnecting existing 1000 ltr tanks, setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes and hoisting if required reconnecting and re-fixing in position including mention date of cleaning in tank with white/ black paint complete all as specified and directed. |
| 35 | Dismantling water tanks and removing to store of capacity n.exc 500 Ltrs complete all as specified and directed. |
| 36 | Dismantling water tanks and removing to store of capacity n.exc 1000 Ltrs complete all as specified and directed. |
| 37 | S & F 1000 litres capacity rotational moulded polyethylene water storage tanks triple layer,white colour (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed |
| 38 | S & F 500 litres capacity rotational moulded polyethylene water storage tanks triple layer,white colour (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed |
| 39 | S&F in repair gun metal globe or gate valves, (ISI marked), with iron wheel head, screwed both ends for iron pipe and fixed, for following bore complete all as specified and directed:- |
| 40 | 20 mm Bore |
| 41 | 15 mm Bore |
| 42 | Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water etc and removing unseviceable materials out side MoD land complete all as specified and as directed. |
| 43 | Material & labour for Rendering 10 mm thick CM 1:6 using water proofing liquid compound as per manufacturer's instructions on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 44 | M & L for Rendering 15 mm thick in CM 1:4 on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed. |
| 45 | Material & labour for Rendering 5 mm thick CM 1:3 using water proofing liquid compound as per manufacturer's instructions on brick or concrete surfaces of ceiling /chajja's finished even & smooth without using extra cement complete all as specified and directed. |
| 46 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of new plaster surface complete all as specified and directed.. |
| 47 | Preparation of newly plastered surfaces of walls and applying two coat of Oil bound distemper over a coat of primer complete all as specified. |
| 48 | M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed |
| 49 | S&F in repairs 15mm bore Stop valves (angular stop valve), cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 50 | S&F in repair 15 mm bore bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 51 | Taking up or down steel water tubing (GI Pipe) and connections of following bore complete all as specified and as directed :- |
| 52 | 15mm bore |
| 53 | 20mm bore |
| 54 | S&F galvanised steel water tubing (GI pipe), medium grade with all fittings (ISI Marked) and fixed to wall, floor and ceiling or laid in trenches of following bore complete all as specified and as directed :- |
| 55 | 15mm bore |
| 56 | 20mm bore |
| 57 | fixing only galvanised steel water tubing, with all new fittings (ISI Marked) and fixed to wall, floor and ceiling or laid in trenches of following bore complete all as specified and as directed :- |
| 58 | 15mm bore |
| 59 | 20mm bore |
| 60 | M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, following girth complete all as specified and as directed :- |
| 61 | Cutting n exc 10 cm girth. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender