Tender For Special Repair To Bldg No. T-23 (1,2 &3) And Provn Of Overhead Shed And Check Post At Cp-2 At Si Lines Under Ge Bhopal
Tender Value
44.43 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
89000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No. T-23 (1,2 &3) And Provn Of Overhead Shed And Check Post At Cp-2 At Si Lines Under Ge Bhopal
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Aug-2026 | Date amendmend | Date | 17-Aug-2026 |
| 2 | 17-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame) |
| 3 | Taking down shutters and refixing in same opening of any descripition exc 1 sqm and nexc 2sqm each |
| 4 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store |
| 5 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store |
| 6 | Taking up or down 25 mm bore steel tubing and connections, including cleaning for refixing or removal to store |
| 7 | M& L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth |
| 8 | S&F Tubes 15mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors |
| 9 | S&F Tubes 20 mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors |
| 10 | S&F Tubes 25 mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 12 | M&L Screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:6 complette all as specifed and directed |
| 13 | M&L for rendering 10mm thick on fair faces of brick work or concrete surface back coat to walll tile in CM 1:4 complete all as specified and directed |
| 14 | M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/rectangular) polished, of any shade area of each tiles exc .18 sqm but not exceeding .36 Sqm, in floors etc, set and jointed in neat cment slurry and pointed in white or coloured cement to match |
| 15 | M&L for vitrified glazed light shade tiles 8 TO 10 mm thick (square/rectangular) polished, area of each tiles exc .18 sqm but not exceeding .36 Sqmas in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and directed. |
| 16 | M&L for Non skid Ceramic coloured tiles 7-8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floor etc set and jointed in white or colour cement to match the surface of the tile complete all as specified and directed by Engr in charge. |
| 17 | M&L glazed ceramic coloured tiles in vertical surfaces 350x250x7mm /450x350x7mm thick set and jointed in cement slurry with joint free and pointed in white or coloured cement to match tiles with complete all as specified and directed. |
| 18 | M&L for Endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.11 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including Demolition all as specified and directed..Make Johnson endura. |
| 19 | M&L for Endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.11 sqm , as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete including Demolition all as specified and directed. |
| 20 | Demolition of flag stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. |
| 21 | M&L for granite tiles of 15-18 mm thick on vertical surface such as skirting, dado, steps, wash basin table top, flooring, kitchen slab, machine cut beddded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including rendering 15 mm thick back coat in CM (1:6) including Demolition complete all as specified and directed. |
| 22 | Dismantling boarding any description fixed in any position with nails. |
| 23 | S&F in reapir 18mm plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed by Engr-in-charge. |
| 24 | S&F in reapir 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed by Engr-in-charge. |
| 25 | S&F 100 mm Stainless steel handle , cast type, polished bright complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F in repair to Cabinet Hinges Soft Close SS 8 Crank complete all as specified and directed. |
| 27 | S&F in repair to magnetic catcher for cupboard shutter complete all as specified and directed make :- Hettich or equivalent. |
| 28 | S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 100mm complete all as specified & directed by Engineer -in -Charge. |
| 29 | S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 150mm complete all as specified & directed by Engineer -in -Charge. |
| 30 | S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 200mm complete all as specified & directed by Engineer -in -Charge. |
| 31 | M&L for making good under cills and over archs,lintels and bressummers including all pinning where necessary in cement mortar in 1:6 all as specified and directed. |
| 32 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. complete all as specified and directed. |
| 33 | S&F 4.8mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane all as specified and directed. |
| 34 | S&F in repair of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 35 | S&F in repair/replacement Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65*100 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. |
| 36 | S&F in repair/replacement Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65*125 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. |
| 37 | S&F in repair/replacement 30mm to Factory made single extruded WPC (WoodPolymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. |
| 38 | S&F in repair/replacement 30 mm Factory made single extruded WPC (Wood Polymer Composite) solid plain Glazed shutter door of 30 mm size open rebated and prepared to receive gauze, etc.(without sash bars) edge of framing plain, chamfered or rounded, etc; size of members of shutters comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note : Wiremesh Shall be measured and paid separetely). |
| 39 | S&F in repair/replacement Factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of M.S. tube for top and bottom rails .Ms. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2mm width stuck inside with solvent cement for stiles and plain colur PVC sheet for top rails ,lock rail &bottom rail ,panel will be of wire gauze in lieu of PVC Sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube. The wire gauge shall be stretched to tighten firmly. |
| 40 | S&F in repair/replacement Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as specified and directed. |
| 41 | S&F 100mm size butt hinges medium weight cold rolled mild steel. |
| 42 | S&F 125mm butt hinges, heavy weight, cold rolled mild steel and fixed, type C-21. |
| 43 | S&F 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed by Engr in charge. |
| 44 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr in charge. |
| 45 | S&F Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 250mm long, plate type, complete all as specified and directed. |
| 46 | S&F 300mm Aluminium sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 47 | S&F in repairs Vitreous china wash hand basin white flat back of size 550 x 400mm excluding tap but including brackets/CP brass 32mm waste coupling complete all as specified and directed. |
| 48 | S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing costern and flush pipe) all as specified and directed. |
| 49 | S&F 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed by Engr in charge. |
| 50 | S&F handshower (Health faucet) with 8mm dia 1 meter long flexible tube and wall hook fixed in repairs |
| 51 | S&F chromium plated grating doom 100 mm dia with waste hole. |
| 52 | S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe |
| 53 | S&F PVC connection 15mm size with PTMT nuts of length 600 mm fixing complete all as specified and directed by Engr in charge. |
| 54 | S&F in repairs 15 mm Angle valve stopcock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 55 | S&F in repairs 15 mm bib taps (having weight not less than 0.40 kg as per SSR Part I clause 18.14.2) cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule, complete all as specified and directed. |
| 56 | M&L PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75mm bore complete all as specified and direcetd. |
| 57 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) |
| 58 | S&F PVC(SWR) pipes 75 mm bore single socketed in any length with rubber rings joints laid in trenches |
| 59 | All as per item No 57.00 above but 110mm bore. |
| 60 | S&F PVC(SWR) bend of the following bore 75 mm |
| 61 | S&F PVC(SWR) bend of the following bore 110 mm |
| 62 | S&F PVC(SWR) branch piece single (Y) equal or unequal bend the following bore 75 mm |
| 63 | S&F PVC(SWR) branch piece single (Y) equal or unequal bend the following bore 110 mm |
| 64 | S&F PVC(SWR) junction single (single 'T') equal or unequal of the following bore 75 mm |
| 65 | S&F PVC(SWR) junction single (single 'T') equal or unequal of the following bore 110 mm |
| 66 | S&F PVC(SWR) vent cowl for following bore 75mm |
| 67 | S&F PVC(SWR) vent cowl for following bore 110mm |
| 68 | S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete. |
| 69 | S&F tubular towel rail chromium plated 20 mm dia D type 60 cm long between flanges complete all as specified and directed by engr in charge. |
| 70 | S & F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union. |
| 71 | S&F in repairs Stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed. |
| 72 | S&F in repair stainless steel plate rack complete assembeled set of (Size: 31 x 36 x 10 inch) fixed with screws as specified and directed. |
| 73 | S&F in repair of PTMT waste coupling, 32 mm dia, half or full thread, complete all as specified and directed. |
| 74 | S&F in repair of PTMT waste coupling, 40 mm dia, half or full thread, complete all as specified and directed. |
| 75 | S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed. |
| 76 | S&F in repair soap dish holder of bootom Cp and glass holer for soap complete all as specified and directed by engr in charge. |
| 77 | S&F in repairs CP 15mm wall/Sink mixture for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 78 | CP fancy type Bib taps, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 79 | S&F of Glass Corner ,size nexc 250mmwith CP bracket. |
| 80 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. |
| 81 | S&F in repair looking mirror approved quality with wooden back and edge, complete polishing , fixing in repairs complete all as specified and directed. |
| 82 | S&F 600x450mm PVC cabinet mirror of superior quality complete all as specified and directed. |
| 83 | Taking down cement plaster, terrazzo/cement dado, skirting etc of any description on brick/stone walls, concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. |
| 84 | M&L 15 mm thick rendering in cm 1:4 on fair aces of bricks walls surface finished even and smooth without using extra cement including water proofing compound all as specified and directed. (water proofing compound measured and paid seperately) |
| 85 | M&L for 10 mm thick rendering in CM 1:6 on fair face of brick walls/ concrete surfaces finished even and smooth without using extra cement all as specified and directed. |
| 86 | M & L Preparation of new plastered surface and applying two coats of oil emulsion distemper over three coat of white cement based putty all as specified and directed. (Note : Putty shall be paid and measured separetely) |
| 87 | M & L Preparation of new plastered surface and applying two coat of exterior weather proof water base emulsion paint white/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed by Engr-in-Charge. |
| 88 | M&L complete removal of old decorated surface of wall and applying two coat of exterior weather proof water base emulsion paint white/coloured over and including one coat of white cement based putty (avg 3mm thick) all as specified and directed by Engr-in-Charge. (Note : Putty shall be paid and measured separetely). |
| 89 | M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and one mm of white cement based putty complete all as specified and directed by Engr-in-Charge. |
| 90 | Demolition of concrete in ground floors and pavings (un reinforced) nexc 15 cm thickness (below or above ground level). |
| 91 | M&L for PCC 1:3:6 type C-2 75 mm thick using 20mm graded aggregate as in plinth protection |
| 92 | M&L fly ash brick work with modular 'B' bricks, straight or curved on plan to any radius in half brick thick walls using modular bricks build in CM 1:4 including Demolition all as specified and directed |
| 93 | M&L fly ash brick work with modular 'B' bricks in cm 1:6 using modular bricks straight or curved on plan to any radius including Demolition all as specified and directed. |
| 94 | S&F in repair 20mm dia drepary rod decorative type incl brackets of approved quality as in complete, all as specified and directed |
| 95 | S&F MS rolled section/tubular sections in purling , cross, beam, rafter,posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-O or Fe 310-O all as specified and direcetd. |
| 96 | S&F MS wind ties for roof truss including necessary drilling bolting as riveting etc and similar work to FE 410-S or FE 310-S all as specified and direcetd. |
| 97 | S&F Pre-painted galvatume aluminium Zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified including Dismantling Asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed by Engineer in charge. |
| 98 | All as per item No 96.00 above but plain sheeting, in ridges including Dismantling Asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering completed all as specified and directed. |
| 99 | M&L preparation of old painted surfaces of steel and iron surface of any description and applying two coats of synthetic enamel paint complete as specified and directed. |
| 100 | M&L for preparation of new steel surface of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 101 | M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work including Demolition of concrete in ground floors and pavings (un reinforced) nexc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 102 | M&L Machine pressed precast concrete interlocking paver block (reflective type ) any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60mm thickness, M-35 grade including 50mm sand cushion layed in floors or paving etc spread, levelled and rammed including watering also including Dismantling complete all as specified and directed by engr in charge. |
| 103 | M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, sub base etc complete all as specified and directed. |
| 104 | Dismantling wall and ceiling boards(fibre, pulp,insultion, etc) or insulation boards/slabs/blankets,any thickness,including cover fillets. |
| 105 | S&F galvanised cold rolled steel section framed work size 600x600mm grid size 24x38x0.60mm Tee (bottom precoated) and 24x24x0.50mm thick wall angle galvanised cold rolled steel section incl expansions fasteners as in ceiling . |
| 106 | S&F 6mm thick Asbestos free calcium silicate board of size 600x600mm fixed to frame of galvanised cold rolled steel frame work as in ceiling including applying two coats of oil bound distemper over a coat of primer all as specified and directed. |
| 107 | M&L for Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth beyond ; for foundation, etc. or for shafts, wells , cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out soft/loose soil complete as directed by Engr in charge. |
| 108 | Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed. |
| 109 | Removal of excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed. |
| 110 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 200 mm internal dia of pipe complete all as specified and directed. |
| 111 | M&L for reinforced concrete pipes, class NP-2, laid and jointed with collars of 200 mm bore of pipe complete all as specified and directed. |
| 112 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 113 | Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete. |
| 114 | ditto as per item No 112.00 but 6 to 8 mm dia bar complete. |
| 115 | Providing precast cement concrete louvres and jallies, 35mm thick (measured solid), using 1:2:4 type B0 including all mouldings but excluding frame. |
| 116 | M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed. |
| 117 | S&F in repairs 500 ltrs capacity Rotational moulded polyethylene water storage tanks 3 layers(Cylindrical vertical with closed top) hoisted and fixed in position all as specified. |
| 118 | S&F in repairs 1000 ltrs capacity Rotational moulded polyethylene water storage tanks 3 layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified. |
| 119 | Surface dressing n exc 15 cm deep in hard dense soil. |
| 120 | Excavating in trenches n exc 1.5m wide and not exc 1.5m in depth for foundation and getting out in hard dense soil including removal of surplus soil outside MD land complete all as specified and directed . |
| 121 | M & L cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete to be laid in required slope complete all as specified. |
| 122 | M&L for Reinforced cement concrete (nominal mix) in type A1 1:1½:3 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed. |
| 123 | M&L for Reinforced cement concrete (nominal mix) in type B0 1:2:4 (12.5mm graded aggregate) in Columns , pillars ,Piers ,Posts and struts complete all as specified and directed. |
| 124 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter surface flat with fair finished surfaces. |
| 125 | M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular in plan to provide rough finish surface to concrete. |
| 126 | M&L brick work with sub class ‘B’ modular bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed. |
| 127 | M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in in cement mortar 1:4 complete all as specified and as directed. |
| 128 | M&L for rendering 10 mm thick on brick or concrete surfaces or surface other than fair faces of brick work in cement plaster 1:6, finished even and smooth w/o using extra cement all as specified and directed |
| 129 | M&L for Rendering 15 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:4 finished even and smooth without using extra cement complete all as specified. |
| 130 | M&L for preparing of newly plastered surface of walls and applying one layer of white putty 1-2 mm and two coats of oil bound distemper over a coat of compatible primer etc complete all as specified and directed. |
| 131 | Supply only Integral water proofing compound complete all as specified and directed. |
| 132 | M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, including finishing of concrete topping even and rough complete all as specified and directed |
| 133 | M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (area of each tiles exc 0.11sqm but not exc 0.18 sqm) in floors and skirting set and jointed in neat cement slurry over screed bed 15cm in CM (1:6) and pointed in white or coloured cement to match with shade of tiles including dismantling of old tiling fixed in any mortar complete all as specified and directed. |
| 134 | M&L for 45-50mm thick sand stone slab in as in sub base counter etc set and pointed in CM 1:4 |
| 135 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 136 | S&F for Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A all as specified and directed. |
| 137 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Gde Fe 410-W (Gde-E-250). |
| 138 | M&L Mild 1.60 mm steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 139 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm but n exc 30cm long.(Diameter of neck in 16 to 20 mm) |
| 140 | Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls as directed. |
| 141 | S &F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W (Gde E-250) quality A |
| 142 | M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed |
| 143 | M&L for 605x605mm size frame of anodised aluminium snap grid frame work for false ceiling including G.I. Hanger wire 3 mm dia. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners all as specified and directed |
| 144 | M&L for exposed metal frame ceiling with 8mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work shall be measured and paid separately) |
| 145 | S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed |
| 146 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) shutters for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 including necessary locks handle, rubber gasket for glass/ wire mesh fixing |
| 147 | Supply and fix 4.0mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 148 | Supply and fix stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 149 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard dense soil. |
| 150 | M&L for hardcore of broken stone of gauge n exc. 63 mm, deposited, spread, levelled and rammed in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 151 | Taking down carefully copper/aluminium point wiring concealed/ casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed. |
| 152 | Dismantling/taking down of unserviceable old existing service/submain wire of any size all as specified and directed. |
| 153 | Dismantling/taking down of unserviceable distribution boards with MCBs all as specified and directed. |
| 154 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LS cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LS cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed (Note cost of cutting chase and making good shall be included in the quated rates) |
| 155 | All as per item No 153.00 above but one socket outlet 5 pin 5/6 Amps on independent board controlled by one, one way switch. |
| 156 | All as per item No 153.00 above but one socket outlet 5 pin 5/6 Amps on same board with other one, one way switch. |
| 157 | All as per Srl item No. 153.00 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed by Engineer - in - Charge. |
| 158 | S & F modular switch one way 6 Amp one module, 240 volts complete all as specified and directed by Engineer - in - Charge. |
| 159 | S & F modular switch one way 16 Amp one module, 240 volts complete all as specified and directed by Engineer - in - Charge. |
| 160 | Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed by Engineer - in - Charge. |
| 161 | Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed by Engineer - in - Charge. |
| 162 | Supply and fix sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one Single pole MCB 240 V grade 25/20 Amp complete all as specified and directed . |
| 163 | S&F ceiling rose 3 terminals 65x25 mm dia poly carbonate isolated all as specified & directed. |
| 164 | S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed. |
| 165 | Supply and fixing modular fan regulator complete all as specified and directed by Engineer - in - Charge |
| 166 | S&F 10 watt LED bulb cool day light, 230/240V, AC all as specified and directed. |
| 167 | S&F LED tube light fitting bright 20 watt. slim elegant design. and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 168 | S & F modular bell push 6 Amp one module, 240 volts complete all as specified and directed by Engineer - in - Charge. |
| 169 | S&F call bell Ding Dong 230V, AC, single phase ISI marked all as specified and directed. |
| 170 | S&F in replacement of building security light fitting complete with 36 watt LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution complete fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 metre long and MS clamp and nut bolts washers and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed. |
| 171 | Taking down and refixing of LED tube light fitting bright 18/20 Watt. slim elegant design. and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 172 | Supply and fixing factory made epoxy powder coated Distribution Board TP & N 4 ways ( VTPN MCCB DB ) and space for MCCB as incomer, with metal door ( IP-43 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed.NOTE:- MCCB shall be measured and paid seperatly. |
| 173 | S&F in replacement sheet metal enclosure double door type ( IP-54 protection ) surface mounted concealed in wall 16 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. NOTE:- MCB shall be measured and paid separately. |
| 174 | S&F MCCB 125 Amp, 3 Pole, breaking capacity 36 KA with complete electrical connections by appropriate size of copper lugs, complete all as specified and directed. |
| 175 | Supply and fix in replcement MCB 6-32 amps, 10 KA, SP 240 volt, 'C' series all as specified and directed |
| 176 | Supply and fix in replcement MCB 63 amps, 10 KA, SP 240 volt, 'C' series all as specified and directed |
| 177 | Supply and fix in replcement MCB 63 amps, 10 KA, SPN 240 volt, 'C' series all as specified and directed |
| 178 | M&L earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately. |
| 179 | S&F LED Tube light fitting two feet 10 watt, slim design, 230 volts, including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 180 | Taking down/dismantling of storage type hot water Geyser of 50/35/25 litre capacity from different locations by disconnecting inlet/outlet connections and depositing to AGE E/M SI Line store without any damage all as specified & directed |
| 181 | Taking down carefully serviceable/unserviceable exhaust fans of any type/size from its position and depositing to AGE E/M SI Line store without any damage , all as specified and directed. |
| 182 | Taking down carefully ceiling fans of any size from its position, and depositing to AGE E/M SI Line store without any damage all as specified and directed. |
| 183 | M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with three single core PVC insulated ISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into 20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 4.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 184 | M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with three single core PVC insulated ISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 10.0 sqmm nominal cross section area and drawing into 25 mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 10.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 10.0 sqmm cable, one run of 10.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 185 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote controller complete all as specified and as directed. |
| 186 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wallcomplete all as specified and as directed. |
| 187 | Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etcall as specified and as directed. |
| 188 | S&F LED ultra slim decorative aluminium casted edge ceiling light, recess mounting LED 2 x 2, luminaire 36 watt Warm white in colour with all accessories internally pre-wired and including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm three core complete all as specified & directed. |
| 189 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LS H cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LSH cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed (Note cost of cutting chase and making good shall be included in the quated rates) |
| 190 | All as per Srl item No 188.00 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge. |
| 191 | All as per Srl item No 188.00 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge. |
| 192 | All as per Srl item No. 188.00 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed by Engineer - in - Charge. |
| 193 | S&F switch piano flush type 5/6 Amps single pole one way all as specified & directed. |
| 194 | S & F socket out let 5 pin 5/6 Amps all as specified and directed. |
| 195 | S&F in Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal all as specified and directed. |
| 196 | S&F in replacement ceiling rose 2/3 terminals 65x25 mm dia poly carbonate isolated all as specified & directed by Engineer - in - Charge. |
| 197 | S & F in replacement stepped type electronic fan regulator single / double module flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and directed by Engineer - in - Charge |
| 198 | S & F in replacement lamp holder insulated PVC/Polycarbonate body with back plate for conduit /batten fittings complete all as specified and directed by Engineer - in - Charge. |
| 199 | Supply & fixing in replacement LED tube light complete fitting 20 watt 220V, AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose comlete all as specified and directed by Engineer in charge . |
| 200 | S & F inverter type rechargeble LED lamp 12 Watt B22 CDL complete all as specified and directed by Engineer in Charge. |
| 201 | S & F in replacement sheet metal enclosure double door type surface mounted concealed in wall 8 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge. |
| 202 | S & F in replacement MCB SP suitable for 240 volts, AC supply 6 to 32 Amps , with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. |
| 203 | S & F in replacement MCB SPN suitable for 240 volts, AC supply 32 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. |
| 204 | M&L in replacement of earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately. |
| 205 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote controller complete all as specified and as directed. |
| 206 | Supply and fix wall mounted fan of metal body with plastic blades, 400 mm sweep, 1350 rpm, 55 watts, 240 V, 50 Hz, air deliver 65 m³ per minute, three Nos of speed controlling complete all as specified and all as directed. |
| 207 | S&F of PVC insulated PVC sheathed, flexible circular cable 3 core, 2.5 Sqmm strandered copper conductor AC, 230 V complete all as specified and directed. Make Havells/ Palza/ Polycab |
| 208 | S&F non metalic heavy grade PVC conduit ISI marked of size 20mm dia incl all accessories complete all as specified and directed. Make Plasto/ Palza/ Polycab |
| 209 | S&F of integral LED flood light luminaire of 100 W, with 120 lm/wat system efficacy as per IS-16107, IP-66 and IK07 degree of protection with pressure diecast alluminium housing and toughened glass and THD <10%, PF >0.95, 5700-6500 K colour temperature, CRI 70 ,HV Cut off @ 320V/Low V Cut with all fixing arrangement, nuts, bolts, washer and clamps for fixing and connecting to electric system with 2.5 sqmm PVC aluminium stranded conductor 3 core minimum 2.0 m length, on pole inclduing testing and with LM 79 and 80 report with NABL certified lab and NABL certificate complete all as specified and directed. |
| 210 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in hard/dense soil complete all as specified and directed. |
| 211 | Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed |
| 212 | Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 213 | M&L local sand dry, filling in trenches around under ground cable complete all as specified and directed. |
| 214 | M&L for providing of un-reinforced precast concrete cable cover class LV, Type 1 size 250mmx 150mm x 40mm laid flat dry for protection of under ground cable complete all as specified and directed. |
| 215 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable pipe and getting out in soft disintegrated rock all as specified and directed. |
| 216 | M & L for making good the disturbed surface by filling PCC 1:2:4 type B-1 using 20 mm graded course aggregate to match with existing surfaces all as specified and directed. |
| 217 | Removing of excavted soft disintegrated rock to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 218 | Supply, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 10 sqmm 2 core all as specified & directed. Note:- Excavation & earth work and pipe / sand / bricks for cable protection shall be measured and paid for separately under appropriate item of this schedule) |
| 219 | M & L GI Tubing \\"light grade\\" galvanized for protection LT Cable all as specified of size 32 mm bore complete all as specified and directed by Engr-in-Charge. |
| 220 | M&L for repairing to damaged roads section in patches with instant ready made premix superior road patching cold bitumen compound with a blend of bitumen, aggregates and high grade polymers to immediate bonding complete all as specified and directed. |
| 221 | Deduct Schedule of credit (calculation will be done off line) Rs.46782.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender