Tender For Repairs / Replacement To Certain Joinerys,Gates,Pvc Flooring, Railings, Plastering Other Connected Works At Dmrl, Atc Devatalagutta, Rcma (Mat), Dsc Line Atc Devatalgutta And Pcda Under Age B/R -Ii Hyderabad.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
19 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs / Replacement To Certain Joinerys,Gates,Pvc Flooring, Railings, Plastering Other Connected Works At Dmrl, Atc Devatalagutta, Rcma (Mat), Dsc Line Atc Devatalgutta And Pcda Under Age B/R -Ii Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutters (without taking off shutters from frame) but each not exceeding 1.50 Sqm |
| 2 | Taking down Chowkats or frames with shutters exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) |
| 3 | Taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as directed |
| 4 | S&F Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 5 | M&L cement concrete type C0, 1:3:6 (using 12.50 mm graded aggregate) for filling in steel frames complete all as directed |
| 6 | S&F factory made solid PVC door frame of size 50x47 mm made out of 5 mm thick plain colour PVC sheet reinforced with M.S. Square tube 19mm x 19 mm of gauge complete all as specified and as directed. |
| 7 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed. |
| 8 | S&F 35 mm thick factory made pressed moulded panelled door of single or multi panel texured masonite moulded door fabricated using well seasoned and chemically treated solid second class hardwood styles, rails and panels made out of tubular core bonded with PF synthetic resin confirming to BWP grade IS: 848. Both faces shall be covered by hot pressing with high density fibre (HDF) of 2.8 to 3 mm thick imported masonite skin. The door's colour, texture design shall be approved by GE complete ass as specified and directed. |
| 9 | S&F 30mm thick flush shutters, solid core construction with block board and plywood face panels, commercial type on both sides including preparation of surface and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as directed. |
| 10 | S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed |
| 11 | S&F stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed. |
| 12 | M&L for preparation of old painted wooden surafces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed |
| 13 | Supply & fixing of UPVC windows /ventilator UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature complete all as specified. |
| 14 | S&F mild steel butt hinges, medium weight cold rolled 100 mm size complete all as specified. |
| 15 | S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed. |
| 16 | S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 17 | S&F 150 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, with brass screws complete all as directed. |
| 18 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed. |
| 19 | S & F mild steel door spring 200 mm long including roller and roller plate complete all as specified and directed. |
| 20 | S&F floor door stopper of alumium alloy body with double legs and 150mm long fixed with screws to shutters complete all as specified and directed. |
| 21 | M&L preparation of new wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying pink primer and Two coat of synthetic enamel paint. |
| 22 | Demolition of un-reinforced cement concrete in floors incl tiles and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance outside MOD land as directed by the Engineer in Charge. |
| 23 | M&L for Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in mass concrete of sub base of flooring/ hard standing. |
| 24 | Repair to Glass doors/toughened glass doors of any description, size and thickness at any height and its including replacement of connected parts like hinges, Piotes and handles etc |
| 25 | M&L for PU coated machine pressed precast concrete paver block of approved tint, shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, as in floors/pavings laid over 40 mm thick sand cushioning layer including dismantling existing floor tile of any descrption complete in all respect and all as specified. |
| 26 | M&L PU coated machine pressed cement concrete tiles 30cm x 30cm x22 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 20mm thick screed or bedding layer in CM 1:6, including dismantling existing floor tile and screed bed of any descrption complete all as directed by Engr-in-charge |
| 27 | S&F Non skid joint less coloured ceramic tiles 7-8mm thick size 300x300 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over M&L 20 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified incl dismantling of old tiles |
| 28 | M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm thick rendering or bedding layer of cement mortar 1:4 and incl dismantling of old tiles complete all as specified. |
| 29 | M&L for light coloured/double charged vitrified tiles of any design and pattern, 600x600x9 to 10mm thick, as in floor and skirting etc incl 15mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b including dismantling existing tile work with screed bed. |
| 30 | Ditto item no 29 above but as in skirting and vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10 mm thick backing coat of cement mortar 1:4 including dismantling existing tile work with plaster complete all as specified and directed. |
| 31 | S&F in repairs venetian blinds vertical type/roller type with polyester fabric of approved colour & pattern including powder coated aluminium fittings of top rail .weight and nylon button /loops etc fixed complete all as specified and as directed. |
| 32 | M&L for providing and fixing false ceiling with light weight 19mm thick mineral Armstrong tiles of size 595x595mm of model prima fine fissured RH 99 suspended on silhouette profile suspension system of grid made from hot dipped GI steel section notary stitched double webbed power coated white consisting of main T- runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx 14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace). The grid system to be rested on the periphery wall/partitions on a W-profile wall section made of pre-coated galvanized steel of dimension 3.0mm long x (15mm+10mm) x22.5mm and laying false ceiling for services like diffusers grill including cutting, making opening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, all complete at all height as per specification, drawing and incl dismantling old false ceiling all as per direction of Engr in Charge. |
| 33 | S&F in repairs aluminium anodised snap grid frame work for false ceiling grid size 605 x 605mm with runners aluminium anodised main Tee of section 35 x 35x 1.5mm thck, cross Tee of section 25 x 25 x 1.5mm thick and aluminium anodised angle of size 25mm x 1.5mm thick section fixed along side of wall including hanging from ceiling with 6mm dia GI ( upto 1200 mm length ) adjustable level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long to ceiling grid complete all as specified |
| 34 | S&F in repairs GI snap grid frame work for false ceiling grid size 605 x 605mm suspended with 4mm dia GI wire ( upto 1200mm length) ajustable level fixed to roof slabs by means of ceiling cleats made out of GI flat complete |
| 35 | S&F 12mm thick Gypsum board to false ceiling grid with screw or suitable clips including applying two coats of acrylic emulsion over a coat of primer complete |
| 36 | M&L for repairs to damage existing false ceiling of any type including replacement of GI hanging wire, channel, Tee and board matching with existing pattern complete all as specified. |
| 37 | Dismantling timber scantlings in fillets,rails,posts,rafters,purlins etc under 40 sq cm in section, in any position unframed work. |
| 38 | S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified. |
| 39 | M&L for prepration of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed. |
| 40 | S & F in repairs Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour (ISI Marked) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 41 | S&F in repairs cylindrical lock suitable for 30 to 40 mm thick shutter with duplicate keys complete. |
| 42 | S&F in repairs brass mortice lock 100mm long vertical type 4 levers fixed to shutter with 2 duplicate keys with handles complete all as directed. |
| 43 | M&L Powder coated (thickness of powder coating not less than 50 micron) aluminium window shutter with frame type/sliding as directed, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc including provision of sheet glass 4 mm thick of selected quality and 25 mircon sun control film reflective type sticked to galss pane as per manufacturers instructions,including taking down old unserviceable existing window complete all as per specified and directed. |
| 44 | S&F Powder coated (thickness powder coated not less than 50 micron) aluminium door shutter with frames, aluminium section weighing 0.55kg/mtr incl necessary joinig clits,glazing clips rubber neoprene packing,handles 2nos in each door, hinges,anodised aluminium snap beading screws, 5.5 mm thick sheet glass with 25 micron sun control film, 12mm thick particle board prelaminated decorative both side, 6 levers lock etc,including takingdown old unserviceable old any type of door complete all as specified and directed |
| 45 | S&F in repair rectangular aluminium hollow section, powder coated of approved colour not less than 50 micron thickness, of size 101.60 mm x 44 mm x 2 mm thick as in partition including fixing with suitable size of nuts, bolts in floors and walls by drilling holes, both vertical and horizontal members including provision of sheet glass 5.5 mm thick and 12 mm thick particle board prelaminated on both side with decorative choice lamination, 25 micron sun control film, aliminium legs, aluminium galzing channel,beading, complete all as specified and directed. |
| 46 | S&F powder coated aluminium grills of weight between 2.5 to 3 kg/sqm to aluminium window etc incl taking down old grills complete all as directed. |
| 47 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainess steel cover , governing pivot made of mild steel heavy duty complete |
| 48 | S&F in repairs 5.50mm thick glass of colour/ tinted pattern in square / rectangular in aluminium door / window, wooden door and wall panelling complete all as specified and directed |
| 49 | S&F in repairs 12mm thick prelaminated particles board interior grade , prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed aluminium door / partition etc complete |
| 50 | Taking down carefully existing aluminium partition, door etc and refixing the same as directed by Engineer -in- Charge including replace damage clip, rubber beading and secure properly loose parts complete all as specified |
| 51 | S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, properly rolled on glass panes without any wrinkle including removal of existing unserviceable film on windows/doors complete all as directed.Make : GARWARE OR EQUIVALENT |
| 52 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/owkhat of size 65 x125mm mm comprising of virgin PVC polymer of K value 58-6 (Suspension Grade), calcium carbonae and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 ms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star eaded SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge in opening as per specification & drawing |
| 53 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of hutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. |
| 54 | S&F in repairs factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cum manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen/cupboard cabinet shutter and shelfs and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing. |
| 55 | S&F 100 mm size Stainless Steel handle complete all as specified and as directed by Engr -in - Charge. |
| 56 | M &L for 50 mm magnetic catches and fixed complete all as specified and directed by Engr-in- Charge. |
| 57 | S&F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as directed. |
| 58 | S&F in repairs Brass cupboard locks heavy duty of size 75mm and 4 levers with duplicate keys complete all as directed.Make: Godrej/Link/Sheel |
| 59 | Telescopic chanels to be fixed to stainless steel baskets, size not less than 350mm when it is closed, complete all as specified and directed.MAKE:- Godrej / Heittech or techno-commercially equivalent make as approved by GE |
| 60 | S&F PVC tiles/ sheet of 3.00 mm thick laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and directed by Engr-in-charge |
| 61 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing confirming to Fe 410-0 complete including dismantling of steel work complete all as specified |
| 62 | S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars, ladders, framed balusters , walk ways, railing, framework or water tank and similar work conforming to Fe- 290 Gde E-165 all as specified |
| 63 | S&F solid PVC wall lining/panelling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified. |
| 64 | S&F 5mm thick PVC fillets of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawings |
| 65 | S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottomrunners, brass handles, etc as specified erected in position and securing runners with holdfast and brackets complete including taking down old gates complete all as specified |
| 66 | S&F in repairs plastic pigeon netting on vertical surface of wall / RCC Jalli fixed with wooden beading/ screws etc all around surface complete all as specified |
| 67 | M&L for providing and fixng stainless steel (Grade 304) railing 0.85m Height made of hollow tubes, channels, plates etc incluidng stainless steel square mesh welding , grinding buffing, polishing and making curvature ( where ever required) and fitting the same with necessary stainless steel nuts and bolts complete incluidng fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement complete |
| 68 | Taking down carefully existing venetian blind and repairs to damage parts like tilt chain, pull cord, carrier clamp, vanes , track clamp and bottom balancing plate matching with existing colour/ make and refixing in original position complete |
| 69 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed. |
| 70 | M & L for rendering 15 mm thick on fair faces of brick work or concrete, stone surfaces in CM 1:4 finished even and smooth without using extra cement |
| 71 | M & L for rendering 12 mm thick on fair faces of brick work or concrete, stone surfaces in CM 1:6 finished even and smooth without using extra cement |
| 72 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over 1.5 mm thick wall care putty (of Birla make) over a coat of alkali resistant primer including any crack filling with proper crack fill material complete all as directed by Engineer in charge |
| 73 | M&L for preparation of Newly plastered surface and applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean including any crack filling with proper crack fill material complete all as specified and as directed by Eng-in-charge. |
| 74 | Taking down carefully loose / distrurbed stainless steel railing and repairs / replace damage pipes, welding properly and buffering complete frame with adequate adhesive and fixed in original position complete all as specified |
| 75 | Repair of stuck MS windows and ventilators by removing deposits, rust and applying greese / oil to make shutters and handles functional including welding with box hinges where required complete all as directed. |
| 76 | Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each panes complete all as specified and directed. |
| 77 | Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 3.0mm thick frosted glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and directed. |
| 78 | S&F in repairs 600x 450 x 5 mm thick fancy looking mirror bevelled edge of selected quality glass fixed with chrome effect screw with SS cap wall hanging set. |
| 79 | Repair to Aluminium doors of any description, size and thickness at any height and its including replacement of connected parts like hinges, Piote hinges and handles etc |
| 80 | S&F hydraulic door closer aluminium die cast body regulated designation No.3 universal type ,suitable for door shutters upto 100mm width and weight bears upto 80kg and fixed complete . |
| 81 | S&F in repairs 3 mm thick plain/figured glass and glazing with oil putty and glazing clip in metal frame or second class hard wood beading in suitable size for wooden frames on squares not exceeding 0.5 Sqm in each pane including hacking out existing damaged glass work complete all as directed. |
| 82 | S&F in repairs 6 to 7 mm thick Rough cast wired glass and glazing with oil putty and glazing clip in metal frame or second class hard wood beading in suitable size for wooden frames on squares not exceeding 1.00 Sqm in each pane including hacking out existing damaged glass work complete all as directed.Note: work will be executed upto a height of 15m. |
| 83 | M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing laid over 15mm thick screed bed in CM 1:4 including dismantling old work complete all as specified and directed. Please Enable Macros to View BoQ information |
| 84 | M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing laid over 15mm thick screed bed in CM 1:4 including dismantling old work complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender