Tender For Periodical And Preventive Maintenance Of Dg Sets And Connected Works At Af Stn Palam Under Ge (Af) Palam, Delhi Cantt-10
Tender Value
30 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
5 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical And Preventive Maintenance Of Dg Sets And Connected Works At Af Stn Palam Under Ge (Af) Palam, Delhi Cantt-10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Material and Labour for Quarterly Periodical, preventive and comprehensive maintenance of different capacity DG sets (15 KVA to 82.5 KVA) installed in various locations at AF Stn Palam consisting of the following :-(a) Checking of total system for proper functioning.(b) Checking of Engine Oil, Fan Belts, Hose Pipes, Fuel pipes and Filters.(c) Checking of Foundation Bolts, Ante-vibration Pads, Oil and Water Safety devises.(d) Cleaning of fuel tank, checking of distilled water in batteries, checking of coolent concentrate and petrollium jelly on battery terminals.(e) Checking of batery charging system, RPM of DG set, Volt meter, Ammeter etc for their proper functioning. |
| 2 | All as per item No.1 here-in-before but of capacity 100 KVA to 125 KVA. |
| 3 | All as per item No.1 here-in-before but of capacity 160 KVA to 250 KVA. |
| 4 | All as per item No.1 here-in-before but of capacity 400 KVA to 630 KVA Note for ser item No. 1.00 to 4.00:- (a) Each job measured and paid separately for each generator set (b) Testing and checking report shall be sumitted. |
| 5 | S&F in replacement of \\"B\\" Check kit comprissing of Diesel filters, lubricating oil, filter set complete with gasket for DG sets of 630 KVA capacity complete all as specified and as directed. Make:- Kirloskar. |
| 6 | S&F in replacement of \\"B\\" Check kit comprissing of Diesel filters, lubricating oil, filter set complete with gasket for DG sets of 400/500 KVA capacity complete all as specified and as directed. Make:- Kirloskar. |
| 7 | S&F in replacement of \\"B\\" Check kit comprissing of Diesel filters, lubricating oil, filter set complete with gasket for DG sets of 62.5 to 75 KVA capacity complete all as specified and as directed. Make:- Kirloskar. |
| 8 | S&F in replacement of \\"B\\" Check kit comprissing of Diesel filters, lubricating oil, filter set complete with gasket for DG sets of 180 to 250 KVA capacity complete all as specified and as directed. Make:- Kirloskar. |
| 9 | S&F in replacement of \\"B\\" Check kit comprissing of Diesel filters, lubricating oil, filter set complete with gasket for DG sets of 160 KVA capacity complete all as specified and as directed. Make:- Kirloskar. |
| 10 | S&F in replacement of \\"B\\" Check kit comprissing of Diesel filters, lubricating oil, filter set complete with gasket for DG sets of 100 / 125 KVA capacity complete all as specified and as directed. Make:- Kirloskar. |
| 11 | S&F in replacement of \\"B\\" Check kit comprissing of Diesel filters, lubricating oil, filter set complete with gasket for DG sets of 15 to 50 KVA capacity complete all as specified and as directed. Make:- Kirloskar. |
| 12 | S&F in replacement of element air cleaner for DG sets of capacity 630 KVA complete all as specified and as directed. Make:- Kirloskar. |
| 13 | S&F in replacement of element air cleaner for DG sets of capacity 400/ 500 KVA complete all as specified and as directed. Make:- Kirloskar. |
| 14 | S&F in replacement of element air cleaner for DG sets of capacity 62.5 to 75 KVA complete all as specified and as directed. Make:- Kirloskar. |
| 15 | S&F in replacement of element air cleaner for DG sets of capacity 180/ 250 KVA complete all as specified and as directed. Make:- Kirloskar. |
| 16 | S&F in replacement of element air cleaner for DG sets of capacity 160 KVA complete all as specified and as directed. Make:- Kirloskar. |
| 17 | S&F in replacement of element air cleaner for DG sets of capacity 100/ 125 KVA complete all as specified and as directed. Make:- Kirloskar. |
| 18 | S&F in replacement of element air cleaner for DG sets of capacity upto 50 KVA complete all as specified and as directed. Make:- Kirloskar. |
| 19 | S&F in replacement of water hose pipe set for DG sets of capacity 400 to 630 KVA complete all as specified and as directed. Make:- Kirloskar/Cummins |
| 20 | S&F in replacement of water hose pipe set for DG sets of capacity 180 to 250 KVA complete all as specified and as directed. Make:- Kirloskar/Cummins |
| 21 | S&F in replacement of water hose pipe set for DG sets of capacity upto 160 KVA complete all as specified and as directed. Make:- Kirloskar/Cummins |
| 22 | S&F in replacement of fuel pipe line set for DG sets of capacity 400 to 630 KVA complete all as specified and as directed. Make:- Kirloskar/Cummins |
| 23 | S&F in replacement of fuel pipe line set for DG sets of capacity upto 250 KVA complete all as specified and as directed. Make:- Kirloskar/Cummins |
| 24 | S&F in replacement of solenied shut off valve for DG set of capacity upto 200 KVA as per model complete all as specified and as directed. Make:- Cummins/Kirloskar |
| 25 | S&F in replacement of solenied shut off valve for DG set of capacity upto 250 to 630 KVA as per model complete all as specified and as directed. Make:- Cummins/Kirloskar |
| 26 | M&L for overhauling and calibration of fuel injection pump including setting the tapped and replacement of seal if required excluding gear pump suitable for DG set of Capacity 400 KVA to 630 KVA complete all as specified and as directed. Make:- Kirloskar/ Cummins |
| 27 | M&L for overhauling and calibration of fuel injection pump including setting the tapped and replacement of seal if required excluding gear pump suitable for DG set of Capacity 180 KVA to 250 KVA complete all as specified and as directed. Make:- Kirloskar/ Cummins |
| 28 | M&L for overhauling and calibration of fuel injection pump including setting the tapped and replacement of seal if required excluding gear pump suitable for DG set of Capacity 100 KVA to 160 KVA complete all as specified and as directed. Make:- Kirloskar/ Cummins |
| 29 | M&L for overhauling and calibration of fuel injection pump including setting the tapped and replacement of seal if required excluding gear pump suitable for DG set of Capacity upto 75 KVA complete all as specified and as directed. Make:- Kirloskar/ Cummins |
| 30 | S&F in replacement of radiator fan belt set for DG sets of capacity 400 to 630 KVA complete all as specified and as directed. Make:- Cummins/Kirloskar |
| 31 | S&F in replacement of radiator fan belt set for DG sets of capacity upto 250 KVA complete all as specified and as directed. Make:- Cummins/Kirloskar |
| 32 | S&F in replacement of water safety device for DG sets of capacity 250 to 630 KVA complete all as specified and as directed. Make:- Kirloskar/Cummins |
| 33 | S&F in replacement of water safety device for DG sets of capacity upto 200 KVA complete all as specified and as directed. Make:- Kirloskar/Cummins |
| 34 | S&F in replacement of oil safety device for DG sets of capacity 250 to 630 KVA complete all as specified and as directed. Make:-Kirloskar/Cummins |
| 35 | S&F in replacement of oil safety device for DG sets of capacity upto 200 KVA complete all as specified and as directed. Make:-Kirloskar/Cummins |
| 36 | S&F in replacement of head gasket for DG sets of capacity 250 to 630 KVA complete all as specified and as directed. Make:-Kirloskar/Cummins |
| 37 | S&F in replacement of head gasket for DG sets of capacity upto 200 KVA complete all as specified and as directed. Make:-Kirloskar/Cummins |
| 38 | S&F in replacement of tapet cover gasket for DG sets of capacity 250 to 630 KVA complete all as specified and as directed. Make:-Kirloskar/Cummins |
| 39 | S&F in replacement of tapet cover gasket for DG sets of capacity upto 200 KVA complete all as specified and as directed. Make:-Kirloskar/Cummins |
| 40 | S&F in replacement of fresh water pump with clamp & nut for DG sets of capacity 180 to 500 KVA complete all as specified and as directed. |
| 41 | Taking down radiator assembly from DG set of Capacity 250 KVA to 630 KVA and cleaning including brazing of water tubes if found leakage during cleaning. The radiator shall be cleaned thoroughly and remove scale deposits by suitable cleaning material. The radiator shall be tested for leakage by means of injecting pressure. The complete DG set housing/ block shall also be de-carbonized/cleaned by means of suitable cleaning material and re-fixing the same and testing after completion complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Description all as per ser item No. 41.00 here-in-before but DG Set of Capacity 160 to 200 KVA complete all as specified and as directed. |
| 43 | Description all as per ser item No. 41.00 here-in-before but DG Set of Capacity 100 to 125 KVA complete all as specified and as directed. |
| 44 | Description all as per ser item No. 41.00 here-in-before but DG Set of Capacity upto 75 KVA complete all as specified and as directed. |
| 45 | S&F in replacement of gear pump of FIP pump for DG set of capacity 250 to 600 KVA complete all as specified and as directed. Make:- Kirloskar. |
| 46 | S&F in replacement of gear pump of FIP pump for DG set of capacity 100 / 200 KVA complete all as specified and as directed. Make:- Kirloskar. |
| 47 | Taking out the unserviceable self starter (24 volts) for repair and overhauling the same with replacement of carbon brush, carbon brush holder, pinion, G M. bush, armature taping, winding, varnishing and heating the field coil, greasing the bearing, Reassembling the self starter, refixing in engine including replacement of starting switch and repairing to panel board wiring and testing complete all as specified and as directed. |
| 48 | Description all as per ser item No 47.00 here-in-before but for 12 Volt complete all as specified and as directed. |
| 49 | M&L for repair to battery charger of 12/24 volts capacity complete by replacing the defective parts such as diode, rectifier including repair to dimmer complete all as specified and as directed. |
| 50 | Supply and Fixing in replacement of Printed Circuit Board Card (EC-2 Relay Card) in existing DG set AMF panel board complete all as specified and as directed. Make:- Kirlosker/micronems/Verdic electronic. |
| 51 | Supply & Fixing in replacement of battery connection wire for 12V, Battery copper conduct for PVC insulated multi strand 1.25 m long duly fixed with terminals and lugs (440/014 or equivalent to 95 sqmm) complete all as specified and as directed. |
| 52 | Supply & fixing in replacement of water/Oil temperature gauge suitable for existing DG Set complete all as specified and as directed by Engr-in-charge. |
| 53 | M&L for calibration & overhauling of Injector with replacement of spring, Ball check, Retainer, link injector, Pin spiral, cup injector, Barrel & plunger etc of kit injector repair and testing on full load complete all as specified and as directed. |
| 54 | M&L for disconnecting the alternator from DG Set of capacity 200/250 KVA for rewinding of armature bring to civil worshop, cutting and removing burnt copper wire including insulating material, cleaning & removing corbon (smoke) particals. Rewinding the armature with good quilty of insulated copper wire of same weight & size of existing wire, jointing, varnshing and heating, reassembling and taking back at site refitting & reconnecting complete testing on full load complete all as specified and as directed. Note:- Winding wire and paper mica shall be measured and paid seperately under respective items. |
| 55 | Description all as per srl item no 54.00 but DG set of capacity 125/100 KVA complete all as specified and as directed. |
| 56 | Supply only super enamel copper winding wire 16 to 20 Gauge, as approved/Ordered for Repair /Re-winding of alternator complete all as specified and as directed by Engr-in-Charge. |
| 57 | M&L and replcement of Cotton Tape Off Sizes, as approved/ Ordered for Repair/Re-winding of alternator, and varnishing, baking and heating the winding to achieve required omhmic value complete all as specified and as directed. |
| 58 | S&F Terminal Block for alternator 200 to 500 KVA Cap complete all as specified and as directed. |
| 59 | M&L for dismantling the Engine of DG Set capacity upto 630 KVA for checking and repair work by opening complete engine head, piston, cylinder and FIP unit including remove cylinder head covers & check valve clearance between rocker arms and valve stem end with filler gauge as per the valve setting sequence 0.3mm for inlet valve and 0.5mm for exhaust valve, reassembling the existing parts complete testing on full load complete all as specified and as directed by Engr-in-charge. Note:- Spares/ parts required to make the DG Set serviceable shall be measured and paid seperatively under relevant items of the schedule. |
| 60 | (a) S&F kit engine Piston |
| 61 | (b) S&F piston Liner kit |
| 62 | (c) S&F Starter 12V DC complete |
| 63 | (d) S&F Oil seal rear |
| 64 | (e) S&F Oil Seal front |
| 65 | (f) S&F Bearing trrust |
| 66 | (g) S&F Sleeve Injector |
| 67 | (h) S&F Valve Inlet |
| 68 | (j) S&F Valve Exhaust |
| 69 | (k) S&F Starter Ring 121 Teeth, 3.175 Module |
| 70 | (l) S&F Valve seat |
| 71 | (m) S&F Ring liner seal |
| 72 | (n) S&F Gear wheel complete |
| 73 | (o) S&F Gasket Set, head gaskets, body gasket complete |
| 74 | S&F in replacement of maintenance free battery 12 volt 180 AH complete all as specified and as directed by Engr-in-Charge. |
| 75 | S&F in replacement of maintenance free battery 12 volt 100/150 AH complete all as specified and as directed by Engr-in-Charge. |
| 76 | Supply and fixing of automatic voltage regulator for 100 to 630 KVA DG sets including testing and commissioning etc complete all as required and directed by Engr-in-Charge. Make:- National/Atlex electric |
| 77 | S&F in replacement of Fuel Level Sensor which senses level of fuel in fuel tank and communicates engine safety unit to provide alarm or stopping of DG as per designed operating levels of fuel complete all as specified and as directed. Make:- Active control |
| 78 | S&F in replacement of electronic battery charger input voltage 230 V AC and out put voltage 12/24 volt DC fixed in AMF panel of DG set complete all as specified and as directed. Make: Teknika/ Electro expert |
| 79 | S & F in replacement of Exhaust silencer complete with muffler of upto 500 KVA capacity DG set complete connects engine and DG silencer to drive away hot gases generated during operation of DG to atmosphere through silencer complete all as specified and as directed. |
| 80 | Supply and replacement / topping up engine oil multi grade 15W/40 complete all as specified and as directed. Make:- Indian Oil/HP/Castrol. |
| 81 | Supply and Filling coolent concentrate for DG set complete all as specified and as directed by Engr-n-charge. |
| 82 | Supply and Filling Distilled Water for DG Set Battery complete all as specified and as directed by Engr-in-Charge. |
| 83 | M&L for painting of DG sets 250 to 500 KVA capacity with two coats of synthetic enamel paint with spray Gun after preparation of surface including scraping, cleaning and washing of Engine Alternator, base frame, control panel and fuel tank of approved coloured complete and writing SM No and capacity etc complete all as specified and as directed. |
| 84 | Description all as per ser item No. 83.00 but 100 to 200 KVA capacity DG Sets complete all as specified and as directed. |
| 85 | Description all as per ser item No. 83.00 but upto 75 KVA capacity DG Sets complete all as specified and as directed. |
| 86 | M&L for checking the control panel of 3 phase UPS of capacity 30/50 KVA by opening the cabinet and checking the faulty circuit / harware/ micro processor relay and PCB circuit including cleaning /removing the dust particle by using high speed blower and calibrating & testing the relays for constant out put voltage complete all as specified and as directed by Engr-in-Charge. |
| 87 | M&L for checking the control panel of 3 phase UPS of capacity 10 /20KVA by opening the cabinet and checking the faulty circuit / harware/ micro processor relay and PCB circuit including cleaning /removing the dust particle by using high speed blower and calibrating & testing the relays for constant out put voltage complete all as specified and as directed by Engr-in-Charge. |
| 88 | M&L for checking the control panel of 3 phase UPS of capacity upto 5 KVA by opening the cabinate and checking the faulty circuit / harware/ micro processor relay and PCB circuit including cleaning /removing the dust particle by using high speed blower and calibrating & testing the relays for constant out put voltage complete all as specified and as directed by Engr-in-Charge. Note for ser item No. 86.00 to 88.00 : Servicing work shall be carried out through reputed service engineer/ company and spares/ parts shall be measured & paid seperately. |
| 89 | Supply and fixing of the following parts of UPS:-(a) LM relay suitable for 30 KVA capacity UPS Make : Sucam/APC/Sintrac |
| 90 | (b) LM relay suitable for capacity upto 20 KVA UPS Make : Sucam/APC/Sintrac |
| 91 | (c ) Capacitance 4/6 mfd Make:- Schnieder/ Seimens |
| 92 | (d) Hardware assembly as per existing make and model for 10/ 20 KVA capacity UPS Make:- Sucam/ Sinetrac |
| 93 | (e) Hardware assembly as per existing make and model for upto 5 KVA capacity UPS Make: Sucam/ Sinetrac |
| 94 | S&F in replacement of power contactor 3 pole with AC coil 415V, 50 Hz of capacity 32 Amps as per existing NO/NC complete all as specified and as directed. Make:- L&T/Havells/Schnieder |
| 95 | S&F in replacement of power contactor 3 pole with AC coil 415V, 50 Hz of capacity 40 Amps as per NO/NC complete all as specified and as directed. Make:- L&T/Havells/Schnieder |
| 96 | S&F in replacement of power contactor 4 pole with AC coil 415V, 50 Hz of capacity 150- 185 Amps as per existing NO/NC complete all as specified and as directed. Make:- L&T/Havells/Schnieder |
| 97 | S&F in replacement of power contactor 4 pole with AC coil 415V, 50 Hz of capacity 250 Amps as per NO/NC complete all as specified and as directed. Make:- L&T/Havells/Schnieder |
| 98 | S&F in replacement of power contactor 4 pole with AC coil 415V, 50 Hz of capacity 63 to75 Amps range as per NO/NC complete all as specified and as directed. Make:- L&T/Havells/Schnieder |
| 99 | S&F in replacement of sealed maintenance free fully charged Nickel cadmium battery 65Ah, 12 volts complete all as specified and as directed by Engineer-in-Charge. Make:- Sucam/ EXIDE/Amron |
| 100 | S&F in replacement of sealed maintenance free fully charged Nickel cadmium battery 42Ah, 12 volts complete all as specified and as directed by Engineer-in-Charge. Make:- Sucam/ EXIDE/Amron |
| 101 | S&F copper wire 25 Sqmm size fixed on wall by saddles to connect with earth to equipment complete all as specified and as directed by Engineer –in-Charge. |
| 102 | M&L in replacement of PCB relay for UPS 30/ 50 KVA as per existing model including connecting to existing control circuit and testing complete all as specified and as directed. |
| 103 | M&L in replacement of PCB relay for UPS 10/20 KVA as per existing model including connecting to existing control circuit and testing complete all as specified and as directed. |
| 104 | M&L in replacement of DPA type module 10 KVA for moudulor UPS as per existing model including connecting to existing control circuit and testing complete all as specified and as directed. |
| 105 | M&L for checking the AMF panel of DG set calibrating the relays for auto / manual run of DG set and testing the circuit for auto run complete and fixing the accessories complete all as specified and as directed. |
| 106 | M&L in replacement of over voltage relay for AMF panel of DG set any capacity including connecting to existing control circuit complete all as specified and as directed. Make:- Teknika/PIC |
| 107 | M&L in replacement of under voltage relay for AMF panel of DG set any capacity including connecting to existing control circuit complete all as specified and as directed. Make: Teknika/PIC |
| 108 | Supply & fixing of micro processer control panel for upto 180 KVA capacityy DG set by taking out unserviceable relay complete with following parameters Make: Kirlosker (a) Individual phase current (Amps)(b) Phase voltages (V)(c ) Generator output frequency (Hz)(d) Engine water temperature (Deg.C)(e) Lubricating oil pressure (kpa)(f) Working hours(g) Push button (Starter) & (stop)(g) LED indications for main function |
| 109 | Description all as per ser item No. 108.00 above but for 200 to 600 KVA capacity DG set complete all as specified and as directed. |
| 110 | S&F mild steel chequered/MS plates 5 mm thick or over in thickness available size duly painted with two coats of black bituminous paint over one coat of red oxide primer and cut to shape for cable duct complete all as specified and as directed. |
| 111 | Supply and fixing in replacement MCCB 63 Amps, 4 pole, 10 kA with fixed thermal & magnetic settings including making electrical connections with suitable size aluminium/copper lugs etc complete all as specified and as directed by Engr-in-Charge. |
| 112 | Supply and fixing in replacement MCB TP 40A, 10kA, 415 Volts, 50 Hz, 'C' series complete all as specified and as directed by Engr-in-Charge. |
| 113 | Supply and fixing in replacement MCB SPN 40A, 10kA, 230 Volts, 50 Hz, 'C' series complete all as specified and as directed by Engr-in-Charge. |
| 114 | Supply and fixing in replacement MCB SP 6-32A, 10kA, 230 Volts, 50 Hz, 'B' series complete all as specified and as directed by Engr-in-Charge. |
| 115 | Material and labour for complete rewiring of internal control/command wiring of existing Automatic Mains Failure (AMF) Panel including dismantling of damaged/old control wires, identification of circuits, ferruling and reconnection of all control components complete. The work shall include providing and fixing FRLS copper multistranded control wires not less tha 1.5 Sqmm of approved colour code for internal wiring between relays, timers, contactors, MCCBs/ACBs, selector switches, push buttons, indication lamps, meters, terminal blocks, DG auto-start module and all associated control circuits as per OEM wiring diagram/specification. The job shall also include proper dressing, bunching and termination of wires using cable ties, ferrules, lugs and PVC channels for neat and safe wiring arrangement inside the panel. Necessary tightening of terminals, checking of loose contacts, cleaning of panel interior and rectification of burnt/damaged control connections shall also be carried out.After completion of rewiring, complete testing and commissioning of AMF panel shall be done including continuity test, insulation resistance test, auto/manual operation, DG start-stop command, mains failure sensing, changeover operation, indication system and interlocking functionality complete to ensure reliable and safe operation of the AMF system complete all as specified and directed by Engineer-in-Charge. |
| 116 | Supply, laying, testing and commissioning of 6 Sqmm 10 core stranded copper cable from AMF panel to DG set for restoration/replacement of auto start and auto stop functioning of DG set in auto mode operation. The work includes disconnecting and dismantling the existing damaged/unserviceable control wiring, laying of new suitable size control cable through existing/new conduit/trench as required, proper dressing, ferruling, glandings, crimping of lugs, termination at AMF panel and DG control panel, identification of all control circuits, tightening of terminals, insulation checking, continuity testing, synchronization/checking of command and feedback signals, programming/settings if required for automatic operation, testing of auto mains failure operation including auto start, changeover and auto shutdown of DG set after restoration of supply complete in all respects complete all as specified and as directed. |
| 117 | Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles & stay etc complete all as specified and as directed by Engr-in-Charge. |
| 118 | Excavating in trenches in Hard/Dense soil, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, laying of cable etc not exc 10 Sq mtr on plan and getting out complete all as specified and directed |
| 119 | Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete all as specified and as directed by Engineer-in-Charge |
| 120 | Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-charge |
| 121 | Cutting existing road / foot path bituminous macadam and PCC on foot path for laying protection pipe for cable and making good the disturbed surfaces of road/ foot path to match with the existing surface all as required , specified , and directed at site by Enge-in-charge. |
| 122 | M & L for shifting, installation, testing and commissioning of existing Automatic Mains Failure (AMF) Panel from existing location to a new location( whit in 50 meter of existing location) near the Diesel Generator (DG) set, including disconnection and reconnection of all incoming/outgoing power and control cables, busbar connections, earthing system and interlocking arrangements complete. The work shall include extension/re-routing of power and control cables through suitable size heavy duty PVC conduit/GI pipe/cable tray as required, dressing of cables with proper ferruling, glandings and termination using suitable copper/aluminium lugs.The AMF panel shall be mounted on suitable fabricated MS channel/frame with proper alignment and vibration-free arrangement near DG set. The job includes reconnection of DG start/stop controls, mains sensing, changeover logic, battery charger connections, indication lamps, meters, selector switches, MCCBs/ACBs, relays and protection system complete as per OEM standards. Necessary earthing with GI/Cu strip/wire shall also be provided and connected to existing earth pit to maintain safe operation. |
| 123 | Supply and laying of XLPE LT 1100 Volt Grade, armoured under ground cable of size 240 Sqmm 3.5 core with stranded aluminium conductor in trenches /passing through pipes/ on poles etc complele all as specified and as directed. Make - Havells/KEI/Polycab |
| 124 | Supply and laying of XLPE LT 1100 Volt Grade, armoured under ground cable of size 300 Sqmm 3.5 core with stranded aluminium conductor in trenches /passing through pipes/ on poles etc complele all as specified and directed. Make - Havells/KEI/Polycab |
| 125 | Supply and laying DWC HDPE pipe (120 x 103)mm dia bore, medium class, ISI marked, double wall corrugated for open/ underground laying cable, cut to size and making the tubing for cable protection with connecting coupler as per required complete including cutting of road /PCC and making good the disturbed surfaces to match the existing surfaces complete all as specified and as directed. |
| 126 | Supply and laying DWC HDPE pipe (160 x 135)mm dia bore, medium class, ISI marked, double wall corrugated for open/ underground laying cable, cut to size and making the tubing for cable protection with connecting coupler as per required complete including cutting of road /PCC and making good the disturbed surfaces to match the existing surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender