Tender For Addition/ Alteration Of B-2 Building Of Saf Game Village Koyembedu Under Ge (I) (Cg) Chennai.
Tender Value
43 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
17 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration Of B-2 Building Of Saf Game Village Koyembedu Under Ge (I) (Cg) Chennai.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed. |
| 2 | ditto as as item above but size exceeding 1.5 Square metre and not exceeding 4 Square metre each. |
| 3 | M&L for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed as specified and as directed. |
| 4 | S&F 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed |
| 5 | Fixing of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 complete all as specified and as directed. |
| 6 | S&F 2nd class hard wood glazed and skeleton Ventilator/window 30mm thick open rebated and prepared to receive glass, guage etc (without sash bars ), edge of framing plain chemfered ro rounded fitted with cut and mitred beds for securing glass etc size of members size of members of shutter as specified in SSR Part I section 8 clasue 8.20(b) complete all as specified and as directed. |
| 7 | S & F of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of Overall length of cover plate 140 mm as specified and as directed. |
| 8 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as directed and as specified. |
| 9 | S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010) complete all as specified and as directed. |
| 10 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and as directed. |
| 11 | S&F 4.8 mm thick sheet glass selected quality approved fixed in position in aluminium/iron/wooden frame work including rubber beading and pointing cleats/glazing with oil putty complete all as specified and as directed. |
| 12 | S&F MS butt hinges cold rolled medium weight 100mm long. |
| 13 | S&F MS butt hinges cold rolled medium weight 75mm long. |
| 14 | S&F Aluminium, anodised, barrel tower bolts of extruded section 200mm long . |
| 15 | S&F Aluminium, anodised, barrel tower bolts of extruded section 150mm long |
| 16 | S&F Extruded aluminium alloy handles, fabricated type , anodised 150 mm in size . |
| 17 | S&F Extruded aluminium alloy handles, fabricated type , anodised 75 mm in size . |
| 18 | Supply & fix in repairs MS sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12 mm dia and 300 mm long complete. |
| 19 | Supply & Fixed in repairs second class hard wood small fittings incuding 50 mm thick butt hinges such as brackete of any type , stopper/cleat for door or window, articles n.exc. 200 cu cm each with MS butt hinges cold rolled medium weight 50 mm long. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises. |
| 21 | Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 450mm x 350mm or 350mm x 250mm or of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:3, 10mm thick all as specified and as directed. |
| 22 | M&L for Non-skid colour ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm as in floors including screed bed or bedding layers of 15 mm thick cement mortar (1:6) for laying floor finishes all as specified. set and jointed in cement slurry @ 3 Kg/Sqm and pointed in white or colour cement to match existing surfaces complete all as specified and as directed. |
| 23 | M & L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. |
| 24 | M&L for screed bed or bedding layers of 15 mm thick cement mortar (1:4) for laying floor finishes all as specified. all as specified set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 25 | M&L Vitrified Ceramic tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etcincuding rendering 10 mm thick cement mortar (1:4) to receive tiles in vertical surfaces , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 26 | Demolition of cement Concrete of any description andin any position not otherwise specifically provided for plinth as specified and as directed. |
| 27 | Supply only 38mmx1,5 mm plastic dividing strips as in floors complete all as specified and as directed. |
| 28 | M & L Cement concrete (1:2:4) type C-2 using 40mm graded stone aggregate 75mm thick complete as specified and as directed. |
| 29 | M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and no pigments, set, jointed and pointed in neat cement slurry in floors as specified and as directed. |
| 30 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. Complete all as specified and as directed. |
| 31 | M&L for fly ash brick work modular size with sub-class `B' bricks, straight or curved on plan exceeding 6M mean radius built in cement mortar 1:6 Complete all as specified and as directed. |
| 32 | M&L for fly ash brick work modular size with sub class ‘B’ brick straight or curved on plan to any radius in half brick wall in cement mortar 1:4 complete all as specified and as directed. |
| 33 | Supply only liquid water proofing compound. |
| 34 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubing down with water etc complete all as specified and as directed. |
| 35 | M & L for rendering 15mm thick in cement plaster 1:6 on any fair faces of brick work or concrete surfaces finshed even and smooth with out using extra cement as specified and as directed. |
| 36 | M & L for rendering 15mm thick in cement plaster 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth with out extra cement complete all as specified and as directed. |
| 37 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 38 | Cutting chases, pinning in, making good to brick facing where required and pointed in cement mortar 1:3 and making good cutting exceeding 10 cm exc 20 cm girth complete all as specified and as directed. |
| 39 | Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 40 | Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 41 | Supplying and laying of 32mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed. |
| 42 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed. |
| 43 | Refixing of 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed. |
| 44 | Refixing of 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed. |
| 45 | S&F PPR ball valve 20mm dia high pressure of PTMT with aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 46 | S&F in repairs gun metal gate valves, with iron wheel head, screwed both ends for GI pipe 20 mm bore and fixed complete all as specified and as directed. |
| 47 | Supply & Fixed as in repairs vitreous china wash basin, white, flat back, size 580x450 mm excluding taps, waste, chain and plug and porcelin stopper but including breckets complete all as specified and as directed. |
| 48 | S & F as in repairs Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified and as directed. |
| 49 | S & F as in repairs Vitreous china white washdown watercloset pedastal pattern including necessary lime concrete and 100 mm bore cast iron ‘S’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, including necessary connections and jet pressure with nozzle complete all as specified and as directed. |
| 50 | S&F Hand Shower (Health Faucet) with 8mm Dia, 1 metre long flexible tube & wall hook all as specified and directed. |
| 51 | Supply and fix in repairs PVC low level flushing cistern, white, 10 litre capacity, syphonic action type, white body with inlet, ball valve, float, handle, bracket, 32mm dia PVC flush pipe etc and connecting to WC and water pipe lines etc., complete all as specified and as directed. |
| 52 | Supply only Soap dish, vitreous China white, approximate size 160x 160x90mm as specified and as directed. |
| 53 | S&F 15mm bore dia of Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as specified and directed. |
| 54 | S&F PVC connections 15 mm size with PTMT nuts of length 450 m complete all as specified and as directed. |
| 55 | S&F PVC waste pipe 32mm dia of length 900mm PTMT complete all as specified and as directed. |
| 56 | S&F for 600mmx450mm looking mirror of selected quality glass mounted of 9mm thick of commercial plywood and PVC mouldings frame fancy type complete all as specified and as directed. |
| 57 | Supply and Fix in repairs of glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide, 60cm long with chromium plated bracket guard and railing etc., complete all as specified and as directed. |
| 58 | S & F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs as in repair complete all as specified and as directed. |
| 59 | S & F 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified and as directed. |
| 60 | S & F 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs complete all as specified and as directed. |
| 61 | S & F Stop cock Cast copper alloy screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union of 20 mm bore fixed in repairs complete all as specified and as directed. |
| 62 | S & F in repairs fancy type long neck bib taps, cast copper alloy, chromium plated screwed down for 15 mm bore iron pipe or for brass ferrule complete all as specified and as directed. |
| 63 | S & F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) as specified and as directed. |
| 64 | S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed. |
| 65 | S & F 19 mm dia Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and as directed. |
| 66 | Dismantling asbestos cement/PVC pipe 100 mm dia including clamps complete all as specified and as directed. |
| 67 | S & F Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, heavy duty laid in trenches size 50mm bore of pipe as in repair complete all as specified and as directed. |
| 68 | S&F 110mm dia UPVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified and as directed. |
| 69 | S&F 75mm dia UPVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches complete all as specified and as directed. |
| 70 | S&F UPVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified and as directed. |
| 71 | S&F bend suitable for 110mm dia UPVC (SWR) pipe complete all as specified and as directed. |
| 72 | S&F UPVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and as directed. |
| 73 | S&F UPVC (SWR) reducers any radius 110mm bore complete all as specified and as directed. |
| 74 | S&F 110mm bore UPVC (SWR) junction, single (single T) equal or unequal with or without door access complete all as specified and as directed. |
| 75 | S&F UPVC (SWR) vent cowl 75mm dia complete all as specified and as directed. |
| 76 | S & F TMT bar of 10 mm dia, cut to length bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anneled) not less than 0.9mm dia.complete all as specified and as directed. |
| 77 | M&L for applying two coat of white wash on old decorated surfaces of ceiling and cornices including preparation of old plastered surfaces by brooming down or steel wire brushing scrapping down smoke shoots, moulds, moss and efforescent salts, trading oil and greasy spots etc .complete all as specified and as directed. |
| 78 | M & L preparation of new undecorated plastered surface of walls and applying two coat of colour distemper oil emulsion over one coat of primer on wall complete all as specified and as directed. |
| 79 | M & L for complete removal of existing treatment and applying two coat of colour distemper oil emulsion over one coat of primer on wall complete all as specified and as directed. |
| 80 | Material & Labour for complete removal of existing treatment on walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces as specied and as directed. |
| 81 | M&L for 1.5 mm thick wall care putty on wall complete all as specified and directed |
| 82 | M&L for two coat of Synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or girth including preparation complete all as specified and as directed. |
| 83 | M & L for, Preparing of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge. |
| 84 | M&L preparing of old decorated wood or wood base surface of any description over 10 cm width or grith applying one coat of Synthetic enamel paint complete all as specified and as directed. |
| 85 | M&L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats and holdfast including necessary form work complete all as specified and as directed. |
| 86 | S&F in repair Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with beading to wooden frames with aluminium wire staples as specified and directed. |
| 87 | Pre-laminated particle board, 18/19mm thick interior grade, having one side decorative lamination (approved shade) and other side balancing white lamination fixed in pelmet boxes, shelves , rebated or flat edges including 6 mm thick teak wood leaping all-round and fixed as in repairs complete all as specified and as directed. |
| 88 | M & L for 16-18 mm thick machine cut,Granite stone slab (of any type)(table rubbed and polished) in plate forms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges & including cutting of three numbers of grooves etc complete all as specified and directed. |
| 89 | Material and Labour for 15-18mm thick of any shade (table rubbed and polished) laid and jointed in flooring strips, window cills and jambs etc of green Marble over and including 15mm thick backing coat in CM 1:6 complete all as specified and directed. |
| 90 | M&L for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded stone aggregate as in surface channel and drain. |
| 91 | Material and labour for PCC(1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, fiiling and mass concrete etc all as directed. |
| 92 | M&L for pre cast RCC (1:2:4) type B1(using 20 mm graded aggregate). as in cover slabs and set in cement mortar 1:6 including necessary form work and moulds complete as specified and as directed. |
| 93 | Demolition of reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 94 | S & F of sign boards with necessary studs and name in said colour of size 40cm x 15cm to be fixed at room entrance as specified and as directed. |
| 95 | Taking down carefully point wiring with copper / aluminium conductor (light, fan, socket & connected items complete and including making good the disturbed surface of wall, floor etc., and removing material form site and taken as credit complete all as specified and as directed. |
| 96 | Taking down carefully submain wiring with copper / aluminium conductor (light, fan, socket & connected items complete and including making good the disturbed surface of wall, floor etc., and removing material form site and taken as credit complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 97 | Taking down carefully submain wiring with copper / aluminium conductor (light, fan, socket & connected items complete and including making good the disturbed surface of wall, floor etc., and removing material form site and taken as credit complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender