Tender For Provision Of Synthetic Vinyl Flooring For Badminton Court, Acrylic Synthetic Flooring For Basketball Court, And Upgradation Of Outdoor Badminton Court To Indoor Facility At Icgs Karaikal Under Ge (I) (Cg) Chennai.
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
20 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karaikal → Puducherry
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Synthetic Vinyl Flooring For Badminton Court, Acrylic Synthetic Flooring For Basketball Court, And Upgradation Of Outdoor Badminton Court To Indoor Facility At Icgs Karaikal Under Ge (I) (Cg) Chennai.
BOQ
| Sl. No. | Item Description |
| 1 | Provision of synthetic acrylic sports flooring 08 layers for basketball court including preparation of compacted surface at ICGS Karaikal complete all as specified and as directed. |
| 2 | SPECIFICATION OF THE FLOORING:8 LAYERS ACRYLIC SYSTEMS FOR BASKET BALL COURT : SUPPLY AND APPLY OF SPORTS KOTE T-50 MAKE ALL WEATHER PROOF ACRYLIC SYNTHETIC EIGHT LAYERS FLOORING SYSTEM FOR BASKETBALL COURT. (APPROVED BY INTERNATIONAL TENNIS FEDERATION): After cleaning applying,(i) Primer course: Providing and laying one layer of primer(ii) Filler Course: -Providing and laying two layers of acrylic resurfacer(iii) Cushion Course:-Providing and laying three layer of cushion coat(iv) Top Color Coat: -Providing and laying two layer of top colour coatingsGame Line Marking: - Providing and laying game line marking as per standard.Each layer shall be stage passed by Engineer in charge. |
| 3 | Provision of LINING LCM PRO Synthetic vinyl flooring over rubber mat for badminton court including preparation of concrete surface at ICGS Karaikal.Specification of the sports flooring is as follows |
| 4 | After cleaning applying,(i) 7mm UNDERLAY RUBBER MAT: Providing and laying High density rubber mat as base flooring with adhesive on both sides. |
| 5 | (ii) LINING-LCM PRO MAT 5mm (GREEN COLOR) 1.0mm Wear layer Providing LINING Synthetic vinyl flooring Mat 5mm for Badminton court With line.Game Line Marking: - Providing and laying game line marking as per standard. |
| 6 | S&F Movable badminton Pole with Net complete all as specified and as directed. |
| 7 | M&L for excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft soil complete all as specified and as directed. |
| 8 | M&L for PCC (1:4:8) type D-2 (using 40mm graded stoneaggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 9 | M & L for RCC M–30 Design Mix, using 20mm graded stone aggregate as in foundations including Pile Caps, Rafts, Footings, Foundation Beams, Plinth Beams, Bases for Columns etc. complete all as specified and as directed. |
| 10 | M & L for RCC M-30 Design Mix, using 20mm graded stone aggregate as in Columns, Pillars, Piers, Posts and struts etc. complete all as specified and as directed. |
| 11 | M & L for RCC M-30 Design Mix, using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc. complete all as specified and as directed. |
| 12 | Use and removal of formwork to sides of concrete foundations, pile caps, footings, bases of columns, raft and raft beams, sides and soffits [if any] of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed. |
| 13 | Use and removal of formwork to sides of pillars, posts, struts, piers, columns and stanchions of any shape / cross section for fair finished surfaces of concrete complete all as specified and as directed. |
| 14 | Use and removal of formwork to sides and soffits of floor or roof beams, beam launchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc, splays between floors and beams and similar works for fair finished surfaces of concrete complete all as specified and as directed. |
| 15 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 16 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 17 | S & F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) t confirming to Fe-410-W(Gde- E-250) quality- B complete all as specified and as directed. |
| 18 | S & F MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to I.S.I 1161-1998 Grade St-240 with one shop coat of zinc chromate primer paint complete all as specified and as directed. |
| 19 | S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe-410-W(Gde- E-250) quality- B complete all as specified and as directed. |
| 20 | S&F Mild steel rag or lewis bolts 25mm dia, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and agged or lewised, exc 30cm long complete all as specified and as directed. |
| 21 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 22 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 23 | S& F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;complete all as specified and as directed. |
| 24 | M&L for preparing surfaces of steel and iron work of new surface of any description over 10 cm width or grith not otherwise described applying two coats of synthetic enamel paint incluiding one coat of zinc primer complete all as specified and as directed. |
| 25 | M&L for returning, filling in foundation / trenches including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in soft loose soil complete all as specified and as directed. |
| 26 | M&L for removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed. |
| 27 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in cement mortar 1:6 with old size bricks complete all as specified and directed. |
| 28 | M&L for rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1 : 6 and finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | M&L fo rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and 10mm thick in CM 1:4 mixed with WPC and finished fair and even without using extra cement. Note : WPC Will be measured and paid seperately. |
| 30 | Supply only Integral water proofing compound |
| 31 | M&L for preparing new plastered surfaces of walls and applying two coats of Weather Proof Exterior Acrylic Emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer on surfaces of walls complete all as specified and as directed. |
| 32 | M&L for preparing new plastered surface on walls and applying two coats of distemper oil emulsion any colour over one coat of alkali resistant primer work including providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed. |
| 33 | Supply and fixing factory made uPVC white colour Three track three panels sliding window upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 34 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVCmulti-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 35 | S & F 5.0 mm thick Sheet glass, ordinary quality fixed to aluminium windows in squares complete all as specified and as directed. . |
| 36 | M&L for aluminium grill Powder coated (minimum thickness of powder coating 50 micron)of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed. |
| 37 | M & L for RCC M-30 Design Mix, as in Chajjas etc. complete all as specified and as directed. |
| 38 | Use and removal of formwork to chullah hoods, chajjas, troughs and similar items including edges or fair finished surfaces of concrete complete all as specified and as directed. |
| 39 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of 15 mm thick cement mortar 1:6, for laying floor finishes including preparation of exisiting pcc surface complete all as specified and as directed. |
| 40 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirtings / dados etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10 mm thick backing coat in CM(1:3) complete all as specified and as directed. |
| 41 | M&L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/dense soil |
| 42 | M&L for broken stone or boulders of Hardcore of guage n.exc 63 mm, depositted, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surfaces. |
| 43 | M and L for 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate as in sub base of flooring/ hard standing. Please Enable Macros to View BoQ information |
| 44 | M and L for 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate as in sub base of flooring/ hard standing. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender