Tender For special Repair To Bldg No P-32 At Convent Road Under Age B/R-I Of Ge Saugor
Tender Value
26.50 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
2 days left
EMD
53000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-32 At Convent Road Under Age B/R-I Of Ge Saugor
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Aug-2026 | Corrigendum No. 01 | Date | 17-Aug-2026 |
| 2 | 08-Aug-2026 | Corrigendum No. 02 | Date | 29-Aug-2026 |
| 3 | 01-Aug-2026 | Corrigendum No. 01 | Date | 17-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 2 | M&L for 20mm thick cement plaster on brick / concrete/ stone surfaces in two coat (Ist coat 15mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mixed with liquid WPC @ 200ml Per litre) complete all as specified and directed.Note:-WPC will be paid separately under respective item. |
| 3 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone walls, surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 4 | M&L for 5 mm thick plastering in cement mortar (1:3) on ceiling, surfaces finished even and smooth without using extra cement including taking down of existing plaster of any description complete all as specified and directed. |
| 5 | M&L for applying 1mm average water proof cement based putty @1kg (undiluted) per sqm on plastered /old prepared surface of wall using fully automatic airless spray machine and sanding when dry with 240 grit sanding pad using mechanical wall sander to make the surface even, smooth, clean, free from dust and ready to receive finishing primer/paint coat complete all as specified and directed.Note : (i) Putty powder shall be mixed with water as per manufacturer's recommendation/instruction using mechanical putty mixer having mixing capacity of min 2.5 kg putty per minute and allow 6-8 hrs time to dry the putty surface.(ii) Fully automatic airless spray machine shall have 1 litre per minute minimum flow speed and 3300PSI pressure Make : Birla white / JK putty/ Burger |
| 6 | M&L for one coat of acrylic water based exterior grade primer @ 0.9litre(undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface before painting of subsequent coats complete all as specified and directed.Make : Asian(Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total) Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions |
| 7 | M&L for applying two coats of water based premium acrylic smooth exterior emulsion of approved color over primed surface with fully automatic airless spray machine complete all as specified and directed.Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.Make : Asian(Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Fully automatic airless spray machine shall have 1 litre per minute minimum flow speed and 3300PSI pressure(iii) The emulsion shall have silicon additive excellent dirt pickup resistance with low VOC ( less than 50), Antifungal/ Anti Algae properties.(ii) Emulsion not less than 1.79 litre(undiluted)/10 Sqm in two coats shall be used. It can be diluted as per manufacturer’s instructions |
| 8 | M&L for one coat of acrylic water based interior grade primer @ 0.9litre(undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface before painting of subsequent coats complete all as specified and directed.Make : Asian(Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions |
| 9 | M&L for applying two coats of water based premium acrylic smooth interior emulsion of approved color over primed surface with fully automatic airless spray machine complete all as specified and directed.Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.Make : Asian(Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Fully automatic airless spray machine shall have 1 litre per minute minimum flow speed and 3300PSI pressure(iii) The emulsion shall have silicon additive excellent dirt pickup resistance with low VOC ( less than 50), Antifungal/ Anti Algae properties.(ii) Emulsion not less than 1.79 litre(undiluted)/10 Sqm in two coats shall be used. It can be diluted as per manufacturer’s instructions |
| 10 | Notes for Srl item No 1 to 4:-The smart painting work under this contract for periodical services shall include the following and the rates quoted by the bidders shall include the same:-(i) The smart painting work under this contract shall be executed by manufacturer's authorized applicator after approval of name of manufactures by the GE. The contractor shall produce the name brand of material and it manufacturer within 10 days from the date of award of tender.(ii) After approval of name paint manufacturer and the product brand, the contractor shall produce a Memorandum of Understanding\\" (MoU) between contractor and the manufacturer within 28 days from the award of tender date or before the commencement date of work wherein the manufacturer shall own the responsibility of use premium quality product in adequate quantity (as per standard coverage area of product), high slandered workmanship and its' warrantee for five years. The contractor shall produce such warrantee in writing along with similar warrantee on manufacture’s letter head. The contractor shall also produce purchase vouchers/ Invoice for all product/ material utilized in work for their full quantity and Engg-in-charge shall ensure to capt a copy of the same in record duly defaced by him. Purchase vouchers/ invoice must be recorded in measurement book.(v) One room shall be painted as sample/ model room for approval of GE and GE prior to carrying out further work. |
| 11 | M&L for two coat of white wash on old decorated surface of walls including preparation of old surface i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes, cracks etc and washing floors, cleaning glass , joinery , electric fitting, etc complete all as specified and directed.Note : Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge.. |
| 12 | Demolition of cement concrete in unreinforced in ground floor and paving’s n'exc 15cm thickness (below or above ground level), any description complete all as specified and directed |
| 13 | M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, finishing surfaces even & smooth without using extra cement including filling of construction joint with bituminous sealing compound complete all as specified and directed. |
| 14 | Demolition of RCC in any thickness, any description (reinforced cut as required to facilitate demolition) complete all as specified and directed. |
| 15 | M&L for reinforced cement concrete 1:1.5:3, type A1 (using 20 mm graded aggregate, Nominal mix)) as in slab support on walls beams and columns in floors , roofs , landing balconies deck slab etc complete all as specified and directed. |
| 16 | S&F for Mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed. |
| 17 | S&F for Mild steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. Please Enable Macros to View BoQ information |
| 18 | S&F for Mild steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 29, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 days
Aug 17, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender