Tender For Repair / Maintenance And Polishing Of Wooden Furniture Incl Certain Misc Furniture Articles At Binnaguri Mil Stn Under Ge(S) Binnaguri
Tender Value
38.49 Lakhs
Estimated cost
Bid Submission
15 Aug 2026
15 days left
EMD
77000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance And Polishing Of Wooden Furniture Incl Certain Misc Furniture Articles At Binnaguri Mil Stn Under Ge(S) Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | Sofa Set 5 Seater Wooden (FD-281) |
| 2 | Replacement of old/UNS Side rail and S&F new side rail made of 1st class teak wood all as specified and shown in drawing. |
| 3 | Replacement of old/UNS broken batten of seat and S&F new batten of seat made of 1st class teak wood all as specified and shown in drawing. |
| 4 | Replacement of old/UNS broken batten of back and S&F new batten of back made of 1st class teak wood all as specified and shown in drawing. |
| 5 | Replacement of old/UNS wooden rail to support back frame and S&F new rail made of 1st class teak wood all as specified and shown in drawing. |
| 6 | Replacement of old/UNS front legs and S&F new legs made of 1st class teak wood all as specified and shown in drawing. |
| 7 | Replacement of old/UNS arms and S&F new arms made of 1st class teak wood all as specified and shown in drawing. |
| 8 | Replacement of old/UNS PVC shoes and S&F new PVC shoes superior quality all as specified and shown in drawing. |
| 9 | Replacement of unserviceable cushion for seat/back with new cushion comprising single piece of seat/back each made of foam 40 density of size 22\\"x21\\"x100mm complete all as specified and directed. Make of foam cushion : DUNLOP/KURLON/SLEEPWELL duly covered with tapestry cloth stitched with fine standard thread and providing a chain best quality (at either of 21\\" side) of with two runners at both ends superior quality complete all as directed by GE and shown on drg. Note - Rate of tapestry cloth shall not be less than Rs 550/- per RM and colour and texture of Tapestry shall be approved by Engr-in-charge. |
| 10 | M&L for applying French polish to wood/ wooden base surface with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, directed and shown on drawing. |
| 11 | Sofa Set 4 Seater Wooden (FD-281) |
| 12 | Replacement of old/UNS Side rail and S&F new side rail made of 1st class teak wood all as specified and shown in drawing. |
| 13 | Replacement of old/UNS broken batten of seat and S&F new batten of seat made of 1st class teak wood all as specified and shown in drawing. |
| 14 | Replacement of old/UNS broken batten of back and S&F new batten of back made of 1st class teak wood all as specified and shown in drawing. |
| 15 | Replacement of old/UNS wooden rail to support back frame and S&F new rail made of 1st class teak wood all as specified and shown in drawing. |
| 16 | Replacement of old/UNS front legs and S&F new legs made of 1st class teak wood all as specified and shown in drawing. |
| 17 | Replacement of old/UNS arms and S&F new arms made of 1st class teak wood all as specified and shown in drawing. |
| 18 | Replacement of old/UNS PVC shoes and S&F new PVC shoes superior quality all as specified and shown in drawing. |
| 19 | Replacement of unserviceable cushion for seat/back with new cushion comprising single piece of seat/back each made of foam 40 density of size 22\\"x21\\"x100mm complete all as specified and directed. Make of foam cushion : DUNLOP/KURLON/SLEEPWELL duly covered with tapestry cloth stitched with fine standard thread and providing a chain best quality (at either of 21\\" side) of with two runners at both ends superior quality complete all as directed by GE and shown on drg. Note - Rate of tapestry cloth shall not be less than Rs 550/- per RM and colour and texture of Tapestry shall be approved |
| 20 | M&L for applying French polish to wood/ wooden base surface with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, directed and shown on drawing. |
| 21 | Bed Ply Top (FD-245/ FD-246) |
| 22 | Taking out unserviceable plywood top from bed ply top and S&F new plywood 12mm thick BWR, ISI marked conforming to IS: 303-1989 of required shape and size fixed with new screws to wooden rail complete all as specified & as directed and as shown on drawing. (Make : KITPLY/GREENPLY/CENTURY /BHUTAN BOARD). |
| 23 | Taking out old damaged/decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well seasoned ‘Teakwood’ timber including applying one or more coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing. |
| 24 | Taking out old damaged/decayed long rail form its position and S&F new long rail as per existing shape and size in the same position made out of well seasoned ‘SAL’ wood complete all as specified & as directed and as shown on drawing. |
| 25 | -Ditto- all as per item No 03.03 above but short rail and –ditto-. |
| 26 | S&F new stiffener in centre of both long rail of size 40 x 30 mm made out of well seasoned ‘SAL’ wood for support of plywood bed top complete all as specified & as directed and as shown on drawing. |
| 27 | Taking out old decayed plywood facing from inner / outer head board and S&F 3mm thick veneered plywood Gde-I quality (BWR resin) with one side teak face decorative type fixed with rubber adhesive SH Make : fevicol in the same position including 4mm thick teak wood edging including applying one coat of French polish to all exposed timber and plywood surfaces complete all as specified & as directed and as shown on drawing. |
| 28 | -Ditto- all as per item No 03.06 above but for foot board and –ditto-. |
| 29 | Taking out old unserviceable iron clamp and S&F new iron clamp to head board / long rail as per existing shape and size after applying two coats of black synthetic enamel paint (2nd grade quality ) over a coat of red oxide primer complete all as specified & as directed and as shown on drawing. |
| 30 | M&L for applying French polish of glossy finish to exposed wooden & plywood surfaces including preparation of surfaces with applying wood filler wherever required excluding top of bed hard complete all as specified & as directed and as shown on drawing. |
| 31 | Chair Writing (FD-280) |
| 32 | Taking out old damaged/decayed front leg from its position and S & F new front leg & fixing as per existing size and section in the same position made out of seasoned ‘Teak Wood’ timber including applying French polish high glossy finish over wood filler on all exposed timber surfaces complete all as specified and as directed and as shown on drg. |
| 33 | All as per serial item No 04.01 here in before but for rear leg and -ditto-. |
| 34 | Taking out old damaged/decayed side rail left/right from its position and S & F new side rail in the same position as per existing shape and size made out well seasoned ‘Teak Wood’ timber with making holes for canning including applying French polish high glossy finish over wood filler as required on all exposed timber surfaces complete all as specified and as shown on drg. |
| 35 | All as per Serial item No 04.03 here in before but for Front/Rear rail and –ditto-. |
| 36 | Taking out old damaged/decayed bottom stiffener from its position and S & F new bottom stiffener all as existing shape and size in the same position made out well seasoned ‘Teak Wood’ timber including applying French polish high glossy finish over wood filler on all exposed timber surfaces complete all as specified and as shown on drg. |
| 37 | All as per Serial item No 04.05 here in before but for back rest and –ditto-. |
| 38 | All as per Serial item No 04.05 here in before but for hand rest (left/right) and -ditto-. |
| 39 | Taking out and removing old unserviceable worn-out of plastic cane from chair writing and recanning the same with white new plastic cane half round oval type 2mm wide, 0.4mm thick for weaving and 4mm wide for boarding (Godrej Pattern) complete all as specified and as directed and as shown on drg. |
| 40 | Taking out of all old unserviceable rubber/PVC shoes and S & F new hard rubber PVC shoes with screws as approved, directed and shown on drg. |
| 41 | M&L for applying French polish with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, directed and shown on drawing. |
| 42 | Chair Dining (FD-16M/FD-228/FD-279) |
| 43 | (a) Taking out old damaged/broken front leg from its position and S&F new front leg on the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber with providing hard rubber shoe at bottom of leg complete all as specified, directed and shown on drawing. |
| 44 | Ditto- all as per ser No 05.01 above but rear leg and –ditto-. |
| 45 | Taking out old damaged / broken seat rail (front / back) and side rail (left / right) from its position of chair dining and S&F new seat of front / side rail in the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber and making holes for canning with slightly rounded on the edges of the holes all as specified, directed and shown on drawing. |
| 46 | Taking out old damaged / broken leg stiffener from its position and S&F new leg stiffener in the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber complete all as specified, directed and as shown on drawing. |
| 47 | -Ditto- all as per Ser No 05.04 above but of back rest and –ditto-. |
| 48 | (f) Taking out and removing all unserviceable worn out plastic cane from seat of chair dining and re-canning the same with new white plastic cane of 2mm wide, 0.4mm thick half round (oval type) for weaving and 4mm wide for bordering as per Godrej pattern complete all as specified & as directed and as shown on drawing. |
| 49 | M&L for applying French polish with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, directed and shown on drawing. |
| 50 | Table Wooden 900 x 900 x 760 mm w/o drawer (FD-88M/FD-201) |
| 51 | Taking out old damaged/decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18/19 mm thick pre-laminated particle board exterior grade including providing 4mm thick wall seasoned 1st class teak wood beading all round complete with all four corners fixed with screw wooden design pieces of teak wood, all as specified,directed and shown on drawing. Make of pre-laminated particle Board: Green Ply/ Century/ Kitply/ Bhutan Board |
| 52 | Taking out old damaged/decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out of well seasoned 1st class ‘Teakwood’ timber all as specified, directed and shown on drawing. |
| 53 | -Ditto- all as per item No 06.02 above but short rail and –ditto-. |
| 54 | -Ditto- all as per item No 06.02 above but leg and –ditto-. |
| 55 | Taking out old unserviceable / damaged shoes and S&F new PVC/hard rubber shoes in leg complete all as specified and directed. |
| 56 | M&L for applying French polish with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, directed and shown on drawing. |
| 57 | Table 900 x 600 x 760 mm with drawer (FD-41M/FD-283) |
| 58 | Taking out old damaged/decayed top from its position and S & F new top in the same position as per existing shape and size made out of 18/19 mm thick pre laminated particle board exterior grade having one side white balancing and other side Mysore teak colour and providing 4mm thick wall seasoned 1st class teak wood beading all round including applying one coat of French Polish over wood filler complete as specified & as directed and as shown on drawing. Make of pre-laminated particle Board: Green Ply/ Century/ Kitply/ Bhutan Board |
| 59 | Taking out old damaged/decayed long rail from its position and S & F new long rail in the same position as per existing shape and size made out of well seasoned ‘TEAK WOOD’ timber complete including applying one coat of French polish over wood filler wherever required complete as specified and as directed and as shown on drg. |
| 60 | -Ditto- all as per item Ser No 07.02 above but for short rail and –ditto-. |
| 61 | -Ditto- all as per item Ser No 07.02 above but for leg and –ditto-. |
| 62 | -Ditto- all as per item Ser No 07.02 here-in-before but for stiffener and –ditto- |
| 63 | Taking out old damaged/decayed drawer from its position and S & F new drawer as per existing shape and size made out well seasoned ‘TEAK WOOD’ timber complete all as specified and directed and as shown on drg. |
| 64 | Taking out old unserviceable knobs from its position and S & F new knob 25 mm round brass CP Knob fixed with new brass screw, nut/belts and washer complete all as directed and as specified. |
| 65 | M & L for applying French polish glossy finish to all exposed wooden surfaces including preparation of surfaces applying wood filler wherever required complete all as per specified and as directed. |
| 66 | Table 900 x 600 x 760 mm without drawer (FD-55M/FD-231/FD-284) |
| 67 | Taking out old damaged/decayed top from its position and S & F new top in the same position as per existing shape and size made out of 18/19 mm thick pre-laminated particle board exterior grade having one side white balancing and other side Mysore teak colour and providing 4mm thick wall seasoned 1st class teak wood beading all round including applying one coat of French Polish over wood filler complete as specified & as directed and as shown on drawing. Make of pre-laminated particle Board: Green Ply/ Century/ Kitply/ Bhutan Board |
| 68 | Taking out old damaged/decayed long rail from its position and S & F new long rail in the same position as per existing shape and size made out of well seasoned ‘KALARIRISH’ timber including applying one coat of French polish over wood filler complete as directed and shown on drg. |
| 69 | -Ditto- all as per item Ser No 08.02 here-in-before but short rail and –ditto-. |
| 70 | -Ditto- all as per item Ser No 08.02 above but leg and –ditto-. |
| 71 | -Ditto- all as per item Ser No 08.02 above but stiffener and –ditto-. |
| 72 | M & L for applying French polish glossy finish to all exposed wooden surfaces including preparation of surfaces over wood filler wherever required complete all as directed. |
| 73 | Table 600 x 600 x 760 mm without drawer (FD-293) |
| 74 | Taking out old damaged/decayed top from its position and S & F new top in the same position as per existing shape and size made out of 18/19 mm thick pre-laminated particle board exterior grade having one side white balancing and other side Mysore teak colour and providing 4mm thick wall seasoned 1st class teak wood beading all round including applying one coat of French Polish over wood filler complete as specified & as directed and as shown on drawing. Make of pre-laminated particle Board: Green Ply/ Century/ Kitply/ Bhutan Board |
| 75 | Taking out old damaged/decayed long rail from its position and S & F new long rail in the same position as per existing shape and size made out of well seasoned ‘KALARIRISH’ timber including applying one coat of French polish over wood filler complete as directed and shown on drg. |
| 76 | -Ditto- all as per item Ser No 09.02 here-in-before but short rail and –ditto-. |
| 77 | -Ditto- all as per item Ser No 09.02 above but leg and –ditto-. |
| 78 | -Ditto- all as per item Ser No 09.02 above but stiffener and –ditto-. |
| 79 | M & L for applying French polish glossy finish to all exposed wooden surfaces including preparation of surfaces over wood filler wherever required complete all as directed. |
| 80 | Teapoy (FD-278/382) |
| 81 | Taking out old damaged / decayed top form its position and S&F new top made with 18/19mm thick pre-laminated particle board exterior grade including 4mm thick well seasoned 1st class teak wood beading all round complete all as specified, directed and shown on drawing. Make of pre-laminated particle Board: Green Ply/ Century/ Kitply/ Bhutan Board |
| 82 | Taking out old damaged / decayed long rail (front/rear) from its position and supply of fixing new long rail as per existing shape and size made out of well seasoned 1st class ‘Teakwood’ timber including applying one coat of French polish over wood filler in all exposed timber surfaces complete all as specified and shown on drawing. |
| 83 | ‘-Ditto- all as per item No 10.02 above but for short rail (right/ left) and -ditto-. |
| 84 | ‘-Ditto- all as per item No 10.02 above but for leg and -ditto-. |
| 85 | M&L for applying two coat of French polish finish to exposed wooden surface including preparation of surface and applying wood filler to new components complete all as specified and as directed. |
| 86 | Taking out old unserviceable / damaged shoes and S&F new PVC/hard rubber shoes in leg complete all as specified and directed. |
| 87 | Table Peg (FD-2M/FD-277/FD-384) |
| 88 | Taking out old damaged / decayed top form its position and S&F new top made with 18/19mm thick pre-laminated particle board exterior grade including 4mm thick well seasoned 1st class teak wood beading all round complete all as specified & as directed and as shown on drawing. Make of pre-laminated particle Board: Green Ply/ Century/ Kitply/ Bhutan Board. |
| 89 | Taking out old damaged / decayed long rail (front/rear) from its position and supply of fixing new long rail as per existing shape and size made out of well seasoned 1st class ‘Teakwood’ timber all as specified and shown on drawing. |
| 90 | -Ditto- all as per item No 11.02 above but for short rail (right/ left) and -ditto-. |
| 91 | -Ditto- all as pr item No 11.02 above but for leg and -ditto-. |
| 92 | M&L for applying French polish with high glossy finish to exposed wooden surfaces including preparation of surfaces and applying wood filler wherever required complete all as specified |
| 93 | Taking out old unserviceable / damaged shoes and S&F new PVC/hard rubber shoes in leg complete all as specified |
| 94 | Table Centre (FD-29M/FD-235/FD-274) |
| 95 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18/19mm thick pre-laminated particle board exterior grade including 4mm thick 1st class teak wood beading all round complete all as specified,directed and shown on drawing. Make of pre-laminated particle Board: Green Ply/ Century/ Kitply/ Bhutan Board. |
| 96 | Taking out old damaged / decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well seasoned 1st class ‘Teak Wood’ timber completed all as specified and shown on drawing. |
| 97 | Taking out old damaged / decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out of well seasoned 1st class teak wood’ timber complete all as specified,directed and shown on drawing. |
| 98 | -Ditto- all as per items No 12.03 above but short rail and –ditto-. |
| 99 | M&L for applying complete polishing with french polish two coats glossy finish to wooden surfaces including existing/replaced parts preparation of surfaces and applying wood filler whenever required complete all as specified,directed and shown on drawing. |
| 100 | Taking out old unserviceable / damaged shoes and S&F new PVC /hard rubber shoes with screw in leg complete all as specified |
| 101 | Table Dining Eight Persons (FD-30M/FD-273. MAP-II-03) |
| 102 | Taking out old damaged/decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18/19 mm thick plywood BWR grade with 1mm thick decorative laminate type-1 including providing teak wood beading all round complete as specified & as directed and as shown on drawing. Make of plywood : Green Ply/ Century/ Kitply/ Archid. |
| 103 | Taking out old damaged/decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out of well seasoned ‘Teakwood’ timber including applying one coat of French polish over wood filler over exposed new timber surfaces completed all specified & as directed and as shown on drawing. |
| 104 | -Ditto- all as per item No 13.02 above but short rail and –ditto-. |
| 105 | -Ditto- all as per item No 13.02 above but leg and –ditto-. |
| 106 | M&L for applying French polish glossy finish to exposed wooden surfaces after preparation of surfaces applying wood filler wherever required complete all as specified & as directed and as shown on drawing. |
| 107 | Table Dining Six Persons (FD-30M/FD MAP-II-03) |
| 108 | Taking out old damaged/decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18/19 mm thick plywood BWR grade with 1mm thick decorative laminate type-1 fixed with approved adhesive as per manufacture instruction including providing teak wood beading all round complete as specified & as directed and as shown on drawing. Make of particle Board: Green Ply/ Century/ Kitply/ Bhutan Board. |
| 109 | Taking out old damaged / decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out well seasoned ‘Teakwood’ timber including applying one coat of French polish over wood filler over exposed new timber surfaces compete all as specified & as directed and as shown on drawing. |
| 110 | -Ditto- all as per item No 14.02 above but short rail and –ditto-. |
| 111 | -Ditto- all as per item No 14.02 above but leg and –ditto-. |
| 112 | Provn of new HW bracket/corner between leg and side rail all as specified and directed. |
| 113 | M&L for applying French polish glossy finish to all exposed wooden surfaces after preparation of surfaces with applying wood filler wherever required complete all as specified & as directed and as shown on drawing. |
| 114 | Table Dining four Persons (FD/MAP-II/03) |
| 115 | Taking out old damaged/decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18/19 mm thick plywood BWR grade with 1mm thick decorative laminate type-1 including providing teak wood beading all round complete as specified & as directed and as shown on drawing. Make of plywood : Green Ply/ Century/ Kitply/ Archid. |
| 116 | Taking out old damaged/decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out well seasoned 'Teakwood' timber including applying one coat of french polish high glossy finish over wood filler over exposed new timber surfacescomplete all as specified and as shown in drawing. |
| 117 | All as per item No 15.02 here in before but short rail complete all as specified. |
| 118 | All as per item No 15.02 here in before but leg complete all as specified. |
| 119 | Provn of new HW bracket/corner between leg and side rail all as specified and directed. |
| 120 | M&L for applying French polish glossy finish to all exposed wooden surfaces after preparation of surfaces with applying wood filler wherever requiredcomplete all as specified and as shown in drawing. |
| 121 | Bin Linen Multipurpose (FD/E6/MAP/09) |
| 122 | Taking out old damaged / decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18/19mm thick pre-laminated particle board both side teak face glossy finish including wooden beading all around complete all as specified and as shown in drawing. |
| 123 | All as per Ser No 16.01 above but sides (left/right) and -ditto- |
| 124 | All as per Ser No 16.01 above but bottom and -ditto- |
| 125 | All as per Ser No 16.01 above but inter shelves and -ditto- |
| 126 | All as per Ser No 16.01 above but door shutter and fixed with new long type syainless steel piano type hinges with screw and -ditto- |
| 127 | (f) Removing the damaged / decayed plywood back side from its position & S&F new back side made of 12 mm thick plywood commercial grade – one BWR type including one coat of French polish high glossy finish over wood filler on all exposed timber surface complete all as specified and as shown on drawing |
| 128 | S&F stiffner in repair on all around (long & short) at bottom/base of bin multipurpose, made with 75mm x30mm section teak wood incl one coat of french polish high golssy complete all as specified |
| 129 | Taking out old damaged/decayed drawer from its position and S&F new drawer of same size and shape complete all as specified & as directed and as shown on drawing. |
| 130 | Taking out old damaged/decayed handle from drawer/shutter and S&F new Square 'D' type 100 mm long (4\\"), steel handle as approved the same place , complete all as specified |
| 131 | S&F new megnatic catcher with stainless steel plate fixed with screw after taking out old unserviceable megnatic catcher from its position completer all as specified & as directed and as shown on drawing. |
| 132 | M&L for applying French polish to Bin Multipurpose with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, directed and shown on drawing. |
| 133 | Chair Wooden Bottom without Arms (FD-56M/FD-285) |
| 134 | Taking out old damaged/decayed front leg from its position and S & F new front leg as per existing shape and size in the same position made out of well seasoned ‘Teak Wood’ timber complete all as specified and as shown on drawing. |
| 135 | All as per item Ser No 17.01 here-in-before but for rear leg. |
| 136 | Taking out old damaged/decayed side rail (Right/Left) from its position and S & F new side rail as per existing shape and size in the same position made out of well seasoned ’TEAK WOOD’ timber complete all as specified and as shown on drawing. |
| 137 | All as per item No 17.03 here-in-before but for front rail. |
| 138 | All as per item Ser No 17.03 here-in-before but for rear rail. |
| 139 | Taking out old damaged/decayed bottom stiffener from its position and S & F new stiffener in the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber complete all as specified and as shown on drawing. |
| 140 | All as per item No 17.06 here-in-before but for back rest |
| 141 | Taking out old damaged/decayed ply wood seat from its position and S & F new seat ply of 6mm thick BWR type in the same position as per existing shape and size complete all as specified and as shown on drawing. |
| 142 | M/L for applying French polish Glossy finish to all exposed wooden surfaces including preparation of surfaces applying wood filler to new components complete all as specified and as shown on drawing. |
| 143 | Chair Easy (FD-229) |
| 144 | Taking out old damaged/decayed front leg from its position and S & F new front leg in the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber including providing hard rubber ring fixed with screws at the bottom of the leg including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified and shown on drawing. |
| 145 | -Ditto- all as per item No 18.01 above but for rear leg and –ditto-. |
| 146 | Taking out old damaged/decayed back front top rail from its position and S & F new top rail in the same position as per existing shape and size made out of well seasoned ‘TEAK WOOD’ timber including making holes for re-canning including applying one coat of French polish over wood filler on exposed new timber surfaces complete as specified and shown on drawing. |
| 147 | -Ditto- all as per item Ser No 18.03 above but for side top rail (left/right) and -ditto-. |
| 148 | -Ditto- all as per item Ser No 18.03 here-in-before but for rear top rail –ditto-. |
| 149 | Taking out old damaged/decayed bottom side rail (right/left) from its position and S & F new side rail in the same position as per existing shape and size made out of well seasoned ‘TEAK WOOD’ timber including applying one coat of French polish over wood filler wherever required overexposed new timber surfaces complete as specified |
| 150 | -Ditto- all as per item Ser No 18.06 above but for front bottom rail and -ditto-. |
| 151 | -Ditto- all as per item Ser No 18.06 above but for rear bottom rail and -ditto-. |
| 152 | Taking out and removing all unserviceable worn out plastic cane from seat and back of chair easy and re-canning the same with new white plastic cane 2mm wide, 0.4mm thick oval type in seat and back by weaving and 4 mm wide for bordering complete. |
| 153 | Taking out old damaged/decayed hand rest from its position and S & F new hand rest in the same position as per existing shape and size made out of well seasoned ‘TEAK WOOD’ timber including applying one coat of French polish over wood filler over exposed new timber surfaces complete as specified as shown on drawing. |
| 154 | M & L for applying French polish glossy finish to exposed wooden surfaces including preparation of surfaces applying wood filler wherever required compete as specified |
| 155 | Table Writing (FD-33M/FD-249/FD-275) |
| 156 | Taking out old damaged/decayed short legs from its position and S&F new short leg (right/left) in the same position as per existing shape and size made out well seasoned Teak Wood timber including applying one coat of french polish over wood filler over exposed new timber surfaces complete all as specified and as shown on drawing. |
| 157 | - Ditto - all as per Ser No 19.01 above but for rear leg (left/right) and - ditto -. |
| 158 | Taking out of old damaged/decayed plywood back from its position and S&F new 6mm thick commercial plywood 'B' grade BWR fixed in the same position as per existing shape and size including and applying one coat of French Polish over wood filler over on new plywood surfaces complete all as specified and as shown on drawing. |
| 159 | Taking out old damaged/decayed stiffener bottom (right/left/rear) from its postion and S&F new stiffener in the same postion as per existing shape and size made out of well seasoned 'Teak Wood' timber including applying one coat of French Polish over wood filler on exposed new timber surfaces complete all specified and and as shown on drawing. |
| 160 | Taking out old drawer from its position and minor repair of the same which required for as directed and placing the drawer in old position complete all as specified and as directed and as on drawing. |
| 161 | Taking out old damaged/decayed front shutter of table writing from its position and S&F new front shutter made out of 18mm thick particle board with one face teak decorative face including 4mm thick teak wood beading all round and fixed with two nos 50mm brass hinges including applying one coat of French Polish over wood filler on exposed new timber surfaces complete all as specified and as directed and as shown on drawing. |
| 162 | Taking out of old damaged sides (left/right) from its position and S&F new sides made out of 18mm thick with teak decorative teak veneered faced one side size 600mm x 560mm including 4mm thick teak wood beading on front side including applying one coat of French polish over wood filler on exposed new timber surfaces complete all as specified and as directed and as shown on drawing. |
| 163 | Taking out old damaged/decayed top from its postion and S&F new top as per existing shape and size made out of 18mm thick pre laminated particle board one side teak face and one side white balancing including 4mm thick teak wood beading all around complete all as specified and as directed. Make of pre-laminated particle Board: Green Ply/ Century/ Kitply/ Bhutan Board. |
| 164 | Taking out old damaged/decayed cupboard shelf from its postion and S&F new cupboard shelf in the same position as per existing shape and size made out of 12mm thick plywood commercial including 4mm thick teak wood beading in front side including applying one coat of French Polish to all exposed timber and plywood surface complete all as specified and as directed. |
| 165 | Taking out unserviceable knob from its postion and S&F new 25mm dia brass knob CP in the same position with a new brass screw/nuts/bolts and washer complete all as specified and as directed and as shown on drawing. |
| 166 | M&L for applying French Polish glossy finish to wooden surfcaes except top including preparation of surfaces and applying wood filler wherever required complete all as specified and as directed and as shown on drawing. |
| 167 | Table Bed Side (FD-28M/FD-276& FD/E6/MAP/15R) |
| 168 | Taking out old damaged decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well scasoned `Kalasiris' timber including applying one coat of french polish wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing. |
| 169 | Taking out old damaged decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18/19mm thick commercial particle board covered with 1mm thick plastic laminated sheet of mysore teak face to top fixed with adhesive as per manufactures instruction including 4mm thick teak wood beading all round complete all as specified & as directed and as shown on drawing. |
| 170 | Taking out old damaged decayed side from its position and S&F new side in the same position as per existing shape and size made out of 18/19mm thick particle board grade-I quality interior grade decorative teak veneered face one side including 4mm thick teak wood beading on front side including applying one coat of french polish over wood filler over exposed new timber surface complete all as specified & as directed and as shown on drawing. |
| 171 | Taking out old damaged/ decayed shelf from its position and S&F new shelf in the same position as per existing shape and size made out of 18/19mm thick commercial particle board with teak wood beading on front side including applying one coat of french polish over wood filler over exposed new timber surface complete all as specified & as directed and as shown on drawing. |
| 172 | Taking out old damaged decayed Plywood back from its position and S&F new 6mm thick commercial plywood grade BWR in the same position as per existing shape and size including applying one coat of french polish over wood filler over one new plywood surfaces complete all as specified & as directed and as shown on drawing. |
| 173 | Taking out old damaged/ decayed bottom base from its position and S&F new bottom base in the same position as per existing shape and size made out of 18/19mm thick commercial particle board complete all as specified & as directed and as shown on drawing. (Make : Green Ply/Century/Kitply/Bhutan Board). |
| 174 | Taking out old damaged/decayed pull out tray/top drawer from its position and S&F new pull out tray/top drawer in the same position as per existing shape and size all as specified & as directed and as shown on drawing. |
| 175 | -Ditto- as per item Ser No 20.07 above but for bottom drawer and -ditto-. |
| 176 | S&F shoes in repair new hard rubber shoes in leg complete all as specified and directed. |
| 177 | Taking out old damaged/decayed handle/knob from pull out tray/top drawer from its position and S&F new square 'D' type 100mm long (4') steel handle as approved by GE in the same place complete all as specified |
| 178 | Taking out old damaged/ decayed stiffners from its position and S&F new stiffners in the same position as per existing shape and size made out of well seasoned `KALASIRIS' timber including applying one coat of french polish over wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing. |
| 179 | M & L for applying french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed and as shown on drawing. |
| 180 | Almirah Mess Utensil (FD-39M) |
| 181 | Taking out old damaged/ decayed legs from its posn and S&F new leg as per existing shape and size in the same position made out of well seasoned `KALASIRIS' timber including applying one coat of french polish over wood filler on all exposed timber surface complete all as specified & as directed and as shown on drawing. |
| 182 | -Ditto- as per item Ser No 21.01 above but for long rail. |
| 183 | -Ditto- as per item Ser No 21.01 above but for short rail. |
| 184 | Taking out old unserviceable/ decayed back ply from its posn and S&F new back plywood in the same posn of 8/8mm thick commercial grade BWR type as per the existing shape and size complete all as specified & as directed and as shown on drawing. |
| 185 | Taking out old damaged/ decayed door shutter (Right/Left) made out of 18/19mm thick pre-laminated particle board exterior grade both side teak face including S & F well seasoned 4mm thick teak wood beading all round and fixed with brass hinges 50mm long (Type E-II) with brass screw complete including applying one coat of french polish over wood filler on all exposed timber surfaces all complete as specified & as directed and as shown on drawing. |
| 186 | Taking out old damaged/broken aluminium `D' handle from its posn and S & F new aluminium anodised 100mm long `D' handle as per existing shape and size with new aluminium screws in the same posn complete all as specified & as directed and as shown on drawing. |
| 187 | M & L for applying french polish glossy finish to all exposed timber surfaces after preparation of surfaces over wood filler wherever required complete all as specified & as directed and as shown on drawing. |
| 188 | Side Board (FD-26M/FD241/FD-1112) |
| 189 | Taking out old damaged/decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified and as shown on drawing. |
| 190 | Taking out old damaged/decayed long rail from its position and S&F new long rail as per existing shape and size made out of well seasoned ‘Teak wood’ timber fixed in the same position including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified and as shown on drawing. |
| 191 | -Ditto- all as per Ser No 22.02 above but short rail and –ditto-. |
| 192 | Taking out old damaged/decayed bottom from its position and S&F new bottom base in the same position as per existing shape and size made out of 18mm thick well seasoned teak wood complete including applying French polish high glossy finish complete all as specified and as shown on drawing. |
| 193 | Taking out old damaged/decayed door shutter from its position and S&F new door shutter both part made out of 18mm thick pre-laminated particle board with both side teak face 4mm thick teak wood beading all round and fixed with new brass hinges 50mm long with brass screw including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified and as shown on drawing. |
| 194 | Taking out old damaged/decayed ply wood back from its position and S&F new back made out of 18mm thick commercial ply wood fixed in the same position as per existing shape and size including applying one coat of French polish complete all as specified & as directed and shown drawing. |
| 195 | Taking out old damaged/decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18mm thick pre-laminated particle board both side teak face all as specified & as directed by Engr-in-Charge and as shown on drawing. |
| 196 | Taking out old damaged/decayed drawer from its position and S&F new drawer as per existing shape and size made out of well seasoned 'Teakwood’ timber at all sides with 4mm wide teakwood edging at front side and 6mm thick commercial plywood at bottom including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing. |
| 197 | Taking out old damaged/decayed sides from its position and S&F new sides (Left/Right) in the same position as per existing shape and size made out of 18mm thick pre-laminated board teak decorative one face including 4mm thick ‘teak wood beading on front side including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed by Engr-in-Charge and as shown on drawing. |
| 198 | (k) Taking out old damaged/decayed insides partition from its position and S&F new partition the same position as per existing shape and size made out of 18mm thick pre-laminated particle board complete all as specified & as directed and as shown on drawing. |
| 199 | Taking out old damaged shelf from its position and S&F new shelf as per existing shape and size made out of 18mm thick pre-laminated particle board in the same position complete all as specified & as directed as shown on drawing. |
| 200 | S&F new 26mm round brass chromium plated knob fixed with brass screw/nuts and bolts and washer after taking out old unserviceable knob from its position complete all as specified & as directed and as shown on drawing. |
| 201 | M&L for applying French polish glossy finish in all wooden surfaces of side board including preparation of surfaces including applying wood filler wherever required complete all as specified & as directed and as shown on drawing. |
| 202 | Table Dressing Gents with Mirror (FD/E6/MAP/16) |
| 203 | Taking out old damaged/decayed legs from table dressing gents and S&F new legs in the same position as per existing shape and size made out of well seasoned hard wood teak complete all as specified and as shown on drawing. |
| 204 | All as per item No 23.01 above but mirror frame and -ditto- |
| 205 | Taking out old damaged /decayed back ply wood from its position and S&F new 12mm thick plywood BWR grade as per exsiting shape and size complete all as specified and as shown on drawing. |
| 206 | All as per Ser No 23.03 above but back plywood of mirror frame and -ditto- |
| 207 | Taking out old damaged /decayed frame of table dressing gents (Top, bottom and sides of each frame) from its position and S&F new frame (top, bottom and sides) of same as per existing shape and size made with 18mm thick plywood BWR grade with 0.9mm thick sunmica for outer surface incl 4mm thick wooden beading on all around complete all as specified and as shown on drawing. |
| 208 | S&F in repair glass shelves to existing position with provide glass holder as per existing shape and size complete all as specified and as shown on drawing. |
| 209 | Taking out old broken/decayed mirror from its position and S&F new 5.5mm thick looking mirror of the same as per existing shape and size complete all as specified and as shown on drawing. |
| 210 | Taking out old unsv hinges from its position and S&F new long piano continous type hinges as per existing shape and size complete all as specified |
| 211 | S&F in repair magnetic catcher fixed to inner portion of side frame for holding of door/mirror frame complete all as specified |
| 212 | M&L for applying French polish to wood/ wooden base surface with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed and shown on drawing. |
| 213 | Table Dressing Gents with Mirror (FD-31M/230) |
| 214 | Taking out old damaged/decayed top from Table dressing gents and S&F new Top in the same position as per existing shape and size made out of 12 mm thick plywood commercial with 4mm thick teak wood edging on front side covered with 1mm thick plastic laminated sheet teak colour fixed with approved adhesive as per manufactions complate all as specified &as directed and as shown on drawing . |
| 215 | Taking out old damaged/decayed back plank from its position S&Fnew plank 12mm thick made of well seasoned KALASIRIS |
| 216 | Taking out old damaged/decayed drawer from its position and S&F new drawer of the same size made of well seasoned KALASIRISH timber and 6mm thick plywood commercial gde -I quality at bottom of drawer complete all as specified and as shown on drawing. |
| 217 | Taking out old damaged/decayed knob and S&F new knob of 25mm round chromium plated best quality as approved fixed in the drawer with new nuts/ screws completeall as specified and as shown on drawing. |
| 218 | Taking out old damaged / decayed bottom planks from its position and S&F new bottom planks of 12mm thick well seasoned KALASIRISH timber as per existing shape and size complete all as specified and as shown on drawing. |
| 219 | --------Ditto--------all as per item No 24.05 abov but for side planks --------do------ |
| 220 | taking out old damaged/decayed back ply from mirror frame and S&F new back ply 6mm thick -gde-I commercial all as per existing shape and size complete all as specified & as directed and as shown on drawing. |
| 221 | Taking out old UNSV miroor from its posn and S&F new miroor of size 380x760mmx 5.5mm thick make .golden fish /equivalent fixed in the old position complete all as specifed & as directed and as shown on drawing. |
| 222 | Taking out old damaged Miroor frame its posn and S&F new miroor frame made of well seasoned KALASIRISH timber as per existing shape and size including key plate of F-I 3mm thick and 5mm thick plywood back grde on quality exterior gde complete all as specified &as directed and as shown on drawing. |
| 223 | M&L for applying French polish to wood/ wooden base surface with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, directed and shown on drawing. |
| 224 | Table Dressing Ladies with Mirror (FD/MAP-II/07) |
| 225 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18/19mm thick pre-laminated particle board exterior grade decorative teak glossy finish with wooden beading complete all as specified & as directed and as shown on drawing. (Make : Green Ply/Century/Kitply/Bhutan Board). |
| 226 | All as per item No 25.01 above but sides and -ditto- |
| 227 | (c) All as per item No 25.01 above but front shutter with long steel piano type hinges and -ditto- |
| 228 | (d) All as per item No 25.01 above but sides of stool and -ditto- |
| 229 | Taking out old damaged / decayed bottom from its position and S&F new bottom as per existing shape and size in the same position made out of 12mm thick plywood BWR grade with 0.9mm thick sunmica inner side all as specified & as directed and as shown on drawing. (Make : Green Ply/Century/Kitply/Bhutan Board). |
| 230 | All as per item No 25.05 above but seat ply of stool with one coat of french polish and -ditto- |
| 231 | All as per item No 25.05 above but back ply of table with 18mm thick plywood BWR grade with one coat of french polish and -ditto- |
| 232 | All as per item No 25.05 above but back ply of mirror frame made with 6mm thick plywood BWR grade and -ditto- |
| 233 | Taking out old damaged / decayed / broken mirror frame from its position and S&F new frame as per existing shape and size in the same position made out of well seasoned teak wood complete all as specified and as shown on drawing. |
| 234 | Taking out old damaged / broken mirror from its position and S&F new mirror of size 5mm thick in the same position all as specified and as directed and as shown on drawing |
| 235 | Taking out old damaged / decayed drawer from its position and S&F new drawer complete all as specified and as shown on drawing |
| 236 | Taking out old damaged / decayed handle from drawer/shutter and S&F new square 'D' type 75 mm long steel handle as approved by GE the same place, complete all as specified and as shown on drawing |
| 237 | Taking out old damaged / broken Magnatic Catcher from its position and S&F new Magnatic catcher with stainless of same size and shape complete all as specified and as shown on drawing |
| 238 | Remove old damaged/unsv foam cushion from its position and S&F new 75mm thick foam 40 density cushion covered with leathrite as per shape and size complete all as specified and as shown on drawing |
| 239 | Taking out old damaged / decayed Revolving Nylon double wheel from its position from stool and S&F new Heavy duty revolving nylon double wheel of 50mm dia of same size and shape complete all as specified and as shown on drawing |
| 240 | S&F in repair new long/short stiffner at bottom of table dressing ladies made out of 50mm x 30mm section hard wood teak including applying one coat of French polish glossy finish complete all as specified |
| 241 | M&L for applying French polish to wood/ wooden base surface with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed,and shown on drawing. |
| 242 | Hat Stand with mirror FD-233/1110 |
| 243 | (a) Taking out old damaged / decayed particle board and S&F new 18/19mm pre-laminated particle board grade-I quality one side teak face exterior grade after taking out old damaged / decayed particle 6mm thick teak wood edging all round and re-fixing old serviceable mirror metal peg/brass peg in the same position including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing. (Make : Green Ply/Century/Kitply/Bhutan Board). |
| 244 | (b) Taking out old damaged / decayed Metal/brass peg from its position and S&F new brass peg as approved in the same position as per existing shape and size complete all as specified & as directed by Engr –in-Charge and as shown on drawing. |
| 245 | (c) Taking out old unserviceable/damaged mirror from its position and S&F new mirror as per existing shape and size in the same position complete all as specified & as directed by Engr-in-Charge and as shown on drawing Make Modiguard / Atul. |
| 246 | (d) M&L for applying French polish glossy to all exposed wooden & particle board surfaces including preparation of surfaces applying wood filler wherever required complete all as specified & as directed by Engr-in-charge and as shown on drawing |
| 247 | Book Case (FD-45M/FD-237) |
| 248 | Taking out old damaged/decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well seasoned 1st class 'Teak Wood’ timber including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing. |
| 249 | Taking out old damaged/decayed long rail from its position and S&F new long rail as per existing shape and size made out of well seasoned 1st class 'Teak Wood’ timber in the same position including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing. |
| 250 | -Ditto- all as per Ser No 27.02 above but short rail and –ditto-. |
| 251 | Taking out old damaged/decayed bottom base from its position and S&F new bottom base made out of 18/19mm thick pre-laminated particle board as per existing shape and size fixed in the same position all as specified & as directed and as shown or drawing. |
| 252 | Taking out old damaged/decayed pre-laminated shutter from its position and S&F new shutter as per existing shape and size with new 50mm brass hinges made out of 18mm thick one side teak face face and fixed in the same position with new screws including teak beading all round including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing. |
| 253 | Taking out old damaged/decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18mm thick pre-laminated particle board teakwood beading including applying one coat of French polish over wood filler over exposed new timber surfaces all round complete all as specified & as directed and as shown on drawing. |
| 254 | Taking out old damaged/decayed back ply from its position and S&F new back ply in the same position as per existing shape and size made out of 6mm thick commercial ply wood best quality as approved including applying one coat of French polish over wood filler over on new plywood surfaces complete all as specified and as shown on drawing. |
| 255 | Taking out old damaged/decayed side from its position and S&F new side in the same position as per existing shape and size made out of 18mm thick Pre-laminated particle board including 4mm teakwood beading including applying one coat of French polish over wood filler. complete all as specified & and as shown on drawing. |
| 256 | Taking out old unserviceable brass CP knob from its position and S&F new 25mm round brass chromium plated knob in the same position fixed with brass new screws/nuts and bolts complete all as specified and as shown on drawing. |
| 257 | Taking out old damaged/decayed partition from its position and new partition in the same position as per existing shape and size made out of 18mm thick pre-laminated particle board including teak wood beading on front side including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing. |
| 258 | Polishing to book case with French polish glossy finish after preparation of surfaces with applying wood filler wherever required complete all as specified and as shown on drawing . |
| 259 | Chair Dining Officers (FD-357/FD/MAP-II/04) |
| 260 | Replacement of old/us Rear legs and S&F new Rear legs made of 1st class teak wood all as specified and shown in drg. |
| 261 | Replacement of old/us front legs and S&F new Front legs made of 1st class teak wood all as specified and shown in drg. |
| 262 | Replacement of old/us side rail and S&F new side rail made of 1st class teak wood all as specified and shown in drg. |
| 263 | Replacement of old/us back rail and S&F new back rail made of 1st class teak wood all as specified and shown in drg. |
| 264 | Replacement of old/us Bottom Stiffeners support and S&F new Bottom Stifferners made of 2nd class teak wood all as specified and shown in drg. |
| 265 | Replacement of old/us Back Strip and S&F new Back strip made of 1st class teak wood all as specified and shown in drg. |
| 266 | Replacement of old/us Bracket/corner and S&F new wooden bracket/corner to provide support to legs. |
| 267 | Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg. |
| 268 | Replacement of old/us seat and S&F new seat made of foam 40 density Make : Sleepwell (fratherfoam), Kurlon (Gold) duly covered with tapestry cloth with fixed over 12mm Plywood (make : Green ply/ Centuryply/ Archidply) of BWR Grade ISI Marked confirming to IS-303 complete all as specified and shown in drg complete all as specified and directed. Note : Rate of tapestry cloth shall not be less than Rs 550/-RM and colour and texture of tapestry shall be approved by GE. |
| 269 | M & L for applying two or more coats of French polish glossy finish to all wooden surfaces of chair dining both old and new surfaces after necessary preparation of surfaces including wood filler to complete all as specified and as shown in drawing. |
| 270 | Chair Dining JCO/OR (FD/MAP-II/05) |
| 271 | Taking out old damaged/decayed front leg from its position and S & F new front leg as per existing shape and size in the same position made out of well seasoned ‘TEAK WOOD’ timber including Hard rubber ring complete all as specified and as shown on drawing. |
| 272 | All as per item Ser No 29.01 here-in-before but for rear leg complete all as specified. |
| 273 | Taking out old damaged/decayed seat rail (Front, back and sides) (left/right) from its position and S & F new seat rail in the same position as per existing shape & size made out of well seasoned ‘TEAK WOOD’ timber complete all as specified and as shown in drawing. |
| 274 | Taking out old damaged/decayed leg stiffener from its position and S & F new leg stiffener as per existing shape and size in the same position made out of well seasoned ‘TEAK WOOD’ timber complete all as specified and as shown in drawing. |
| 275 | All as per item Ser No 29.04 here-in-before but for back rest complete all as specified. |
| 276 | Taking out and removing all unserviceable worn out PVC seat frame of Chair Dining JCOs/OR and Supply & fix new PVC seat frame complete all as specified and as shown in drawing. (Make of seat frame : AMKO). |
| 277 | Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg. |
| 278 | M & L for applying French polish glossy finish to all wooden surfaces both old and new surfaces after necessary preparation of surfaces including wood filler to complete all as specified and as shown in drawing. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender