Tender For Repair To Drain Culverts, Boundary Wall, Fencing, Plinth Protection, Path, Hardstanding In Domestic Area, Reapir To Chequered Tiles, Interlocking Tiles, Path, Hardstanding, Gates, Gully Traps, Rain Water Pipes At Md And Otm Accn And Repair
Tender Overview
Project Description
Tender for Repair To Drain Culverts, Boundary Wall, Fencing, Plinth Protection, Path, Hardstanding In Domestic Area, Reapir To Chequered Tiles, Interlocking Tiles, Path, Hardstanding, Gates, Gully Traps, Rain Water Pipes At Md And Otm Accn And Repair/Replacement Of Water Pipe Lines And Cleaning Of Service Tank Works At 20 Wing Afs Under Ge (Af) Bagdogra
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of (Unreinforced) cement Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L for 100 mm thick cement concrete (1:2:4) type B-2 with using 40 mm graded stone aggregates) as in path, Hard standing Making impression of expanded metal complete all as specified and directed. |
| 3 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed. |
| 4 | M&L for pre polished chemically treated chequered cement concrete coloured tiles 25mm thick, set jointed and pointed with grey cement and pigments in neat cement slurry laid over 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 5 | M&L for machine presssd pre-cast coloured concrete interlocking paver block any shape confirming to IS-15658-2006 of 60mm thick , M-35 Grade with grey cement and pigment as approved complete all as specified and directed. |
| 6 | M&L sand filling under interlocking tiles for cushioning etc as complete etc complete all as specified and directed. |
| 7 | M&L for PCC (1:3:6) , type C2 (using 20 mm graded stone aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including formwork if required , complete all as specified and directed. |
| 8 | M&L for 40mm thick cement concrete type B-, 1:2:4 (20mm graded aggregate) as in flooring finished even and fair without using extra cement complete all as specified and directed. |
| 9 | Demolition of brick work/ stone masonry built in cement mortar including arches, pillars etc and excluding precast concrete article complete all as specified and directed. |
| 10 | M&L Brickwork with sub class ‘B’ bricks on plan exc 6 m mean radius built in CM (1:4) complete all as specified and directed. |
| 11 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed. |
| 12 | Taking down cement plaster from brick or concrete or stone walls including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 13 | M&L for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick wall or concrete surfaces and finishing the surface even and fair (without using extra cement) complete all as specified and directed. |
| 14 | M&L for preparation of new undecorated surfaces of any description and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 15 | Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) complete all as specified and directed. |
| 16 | M&L PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in surface channel and drain complete all as specified and directed. |
| 17 | M&L for cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) as in coping, benching, gola, kerb stone, slightly rounded and similar items complete all as specified and directed. |
| 18 | Demolition of RCC of any description and in any position not otherwise specifically provided for etc complete all as specified and directed. |
| 19 | M&L for precast cement concrete (1:2:4) type B-1 (20mm graded aggregate) in cover slab for drain/Manhole and placing in position etc complete all as specified and directed. |
| 20 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 21 | M&L Steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 22 | Dismantling posts or struts (wood, steel, or RCC) any section, incl taking out embedded portion and making good disturbed ground posts embedded in concrete brick work masonry etc complete all as specified and directed. |
| 23 | M&L for excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft and loose soil complete all as specified and directed. |
| 24 | M&L for cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) as in foundations of pillar or post filling and mass concrete complete all as specified and directed. |
| 25 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 26 | Supply only Chain link MS galvanised fencing any shape any dia complete all as specified and directed. |
| 27 | M&L for Steel round bars 10 mm dia and above, cut to length bent to required shape incl cranking, bending and binding with Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 28 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed. |
| 29 | M&L for preparation of old painted Steel or iron surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed. |
| 30 | M&L in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised steel wire, staples or steel pins, etc. complete all as specified and directed. |
| 31 | Dismantling wrought iron or steel work of any description and any places complete all as specified and directed. |
| 32 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings. (Confirming to FE-410W(Gde-E250 Quality B) complete all as specified and directed. |
| 33 | Demolition of (unreinforced) cement Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 34 | M&L for 100 mm thick cement concrete (1:2:4) type B-2 with using 40 mm graded stone aggregates) as in path, Hard standing Making impression of expanded metal complete all as specified and directed. |
| 35 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed. |
| 36 | M&L for pre polished chemically treated chequered cement concrete coloured tiles 25mm thick, set jointed and pointed with grey cement and pigments in neat cement slurry laid over 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 37 | M&L for machine pressed pre-cast coloured concrete interlocking paver block any shape confirming to IS-15658-2006 of 60mm thick , M-35 Grade with grey cement and pigment as approved complete all as specified and directed. |
| 38 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 39 | M&L sand filling under interlocking tiles for cushioning etc as complete etc complete all as specified and directed. |
| 40 | M&L for PCC (1:3:6) , type C2 (using 20 mm graded crushed stone aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including formwork if required , complete all as specified and directed. |
| 41 | Demolition of brick work/ stone masonry built in cement mortar including arches, pillars etc and excluding precast concrete article complete all as specified and directed. |
| 42 | M&L Brickwork with sub class ‘B’ bricks on plan exc 6 m mean radius built in CM (1:4) complete all as specified and directed. |
| 43 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed. |
| 44 | Taking down cement plaster from brick or concrete or stone walls including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 45 | M&L for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick wall or concrete surfaces and finishing the surface even and fair (without using extra cement) complete all as specified and directed. |
| 46 | M&L for preparation of new undecorated surfaces of any description and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 47 | Demolition of Precast RCC cover slab of any description and in any position including separating serviceable reinforcement bars and setting aside for reuse complete all as specified and directed. |
| 48 | M&L for precast cement concrete (1:2:4) type B-1 (20mm graded aggregate) in cover slab for drain/Manhole and placing in position etc complete all as specified and directed. |
| 49 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 50 | Dismantling of wrought or steel work of any description or otherwise provided for complete all as specified and directed. |
| 51 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings. (Confirming to FE-410W(Gde-E250 Quality B) complete all as specified and directed. |
| 52 | M&L framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 53 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 54 | S&F in repair, for 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 55 | S&F in repair, for 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 56 | S&F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 57 | S&F in repair PVC (SWR) Bend radius any radius 75mm bore complete all as specified and directed. |
| 58 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal 110mm bore complete all as specified and directed. |
| 59 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified and directed. |
| 60 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 61 | Dismantling posts or struts (wood, steel, or RCC) any section, incl taking out embedded portion and making good disturbed ground posts embedded in concrete brick work masonry etc complete all as specified and directed. |
| 62 | M&L for excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft and loose soil complete all as specified and directed. |
| 63 | M&L for cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) as in foundations of pillar or post filling and mass concrete complete all as specified and directed. |
| 64 | M&L in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 65 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 66 | Supply only Chain link MS galvanised fencing any shape any dia complete all as specified and directed. |
| 67 | M&L for Steel round bars 10 mm dia and above, cut to length bent to required shape incl cranking, bending and binding with Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 68 | M&L Steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 69 | Dismantling of existing water tank of steel/PVC/AC of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed. |
| 70 | S&F rotational moulded polyethylene water storage tank 500 litres capacity (Cylindrical vertical with closed top )hoisted and fixed in position all as per SSR Part-I complete all as specified and directed. |
| 71 | Dismantling of existing water tank of steel/PVC/AC of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed. |
| 72 | S&F rotational moulded polyethylene water storage tank 1000 litres capacity (Cylindrical vertical with closed top )hoisted and fixed in position all as per SSR Part-I complete all as specified and directed. |
| 73 | S&F in repair ,ball valve ,high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed ,minimum weight of float valve 210 gms complete all as specified and directed. |
| 74 | S&F in repair ,ball valve ,high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25 mm bore and fixed ,minimum weight of float valve 210 gms complete all as specified and directed. |
| 75 | S&F in repair PVC cover for PVC water tank of capacity 500/1000 litre of any make including locking device and screws complete all as specified and directed. |
| 76 | Taking up or down 15 mm bore steel tubing and connections ,including cleaning for refixing or removal to store complete all as specified and directed. |
| 77 | M&L for medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm bore pipe (including in short length) complete all as specified and directed. |
| 78 | Supplying and laying of 16mm CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 79 | Taking up or down 20 mm bore steel tubing and connections ,including cleaning for refixing or removal to store complete all as specified and directed. |
| 80 | M&L for medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm bore pipe (including in short length) complete all as specified and directed. |
| 81 | Supplying and laying of 20mm CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 82 | Disconnecting existing water tank of capacity exc.250 ltr but not exc.500 ltr ,setting aside(or lowering of required) for repair, cleaning etc. and hoisting if required reconnecting and refixing in position on roof after cleaning with suitable chemical and removing all scale & dirt etc. from tank and form mouth of pipe including writing the date of cleaning with using synthetic enamel paint (height of words/letters minimum in 100 mm ) complete all as specified and directed. |
| 83 | Disconnecting existing water tank of capacity exc.500 ltr but not exc.1000 ltr ,setting aside(or lowering of required) for repair, cleaning etc. and hoisting if required reconnecting and refixing in position on roof after cleaning with suitable chemical and removing all scale & dirt etc. from tank and form mouth of pipe including writing the date of cleaning with using synthetic enamel paint (height of words/letters minimum in 100 mm ) complete all as specified and directed. |
| 84 | S&F in repair, 15mm bore chromium plated fancy type stop cock (concealed type) with long shank and cup with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed. |
| 85 | S&F in repair, 15mm bore chromium plated fancy type Long body bib taps with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 86 | S&F in repair, gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed complete all as specified and directed. |
| 87 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender