Tender For Repair & Maintenance Of Water Pump Of Ac Plant And Other Connected Works Under Ge(U) P&M Delhi Cantt-10
Tender Value
35.16 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
4 days left
EMD
70500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Water Pump Of Ac Plant And Other Connected Works Under Ge(U) P&M Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing, and commissioning in renewal of centrifugal end suction pump set complete with electric motor and all necessary accessories, designed for a capacity of 220 m³/hr at a total head of 15 meters, with NPSH required not exceeding 2 meters and pump efficiency not less than 80%; the pump shall be coupled with a 415 V, 50 Hz, IE3 ,1450RPM efficiency class motor suitable for direct coupling, and the material of construction shall comprise cast iron casing, CF8M (SS316 equivalent) impeller, and SS410 shaft, including base plate, flexible coupling with guard, foundation bolts, and all standard accessories required for safe and efficient operation, along with submission of performance curves and technical datasheets for approval and compliance with relevant industry standard.Old seviceable pump and motor assembly to be deposited in MES Store Note: Rate quoted by the contractor shall be incusive new foundation of pump complete pcc, brick work, cement work etc as per standard specification recommendation with also dismentling of old foundation complete all as specified and directedApproved Make - Kirloskar/Grundfos/Ebara/Amrstrong |
| 2 | Supply, installation, testing, and commissioning in renewal of a centrifugal end suction pump set and all necessary accessories, designed for a capacity of 110 m³/hr at a total head of 45 meters, with NPSH required not exceeding 2 meters and pump efficiency not less than 70%; the pump shall be coupled with a 415 V, 50 Hz, IE3 , 1450RPM efficiency class motor suitable for direct coupling, and the material of construction shall comprise cast iron casing, CF8M (SS316 equivalent) impeller, and SS410 shaft, including base plate, flexible coupling with guard, foundation bolts, and all standard accessories required for safe and efficient operation, along with submission of performance curves and technical datasheets for approval and compliance with relevant industry standard.Old serviceable pump to be deposited in MES store Note: Rate quoted by the contractor shall be incusive new foundation of pump complete pcc, brick work, cement work etc as per standard specification recommendation with also dismentling of old foundation complete all as specified and directedApproved Make - Kirloskar/Grundfos/Ebara/Amrstrong |
| 3 | Supply, installation, testing, and commissioning of a globe valve suitable for throttling and isolation service, with a nominal size of 250 mm, designed for reliable operation under specified service conditions; the valve shall be of robust construction with (cast iron) body, Flnged Ends to DIN 2533 PN 16 RF SS410/SS310 disc, and SS410 stem, with soft sealing components (rubber parts such as seat insert/packing) selected as per service suitability and operating conditions; the valve shall be designed to ensure tight shut-off, smooth operation, and long service life, and shall be complete with handwheel/actuation mechanism, bolting, gaskets, and all standard accessories; the valve shall conform to relevant international standards (such as ASME/API/BS as applicable), suitable for the specified pressure and temperature ratings, and shall be supplied with necessary test certificates, material test certificates (MTC), and inspection reports for approval.Approved Make - KSB/L&T/BDK/Zoloto |
| 4 | Supply, installation, testing, and commissioning of a globe valve suitable for throttling and isolation service, with a nominal size of 125 mm, designed for reliable operation under specified service conditions; the valve shall be of robust construction with (cast iron) body, Flnged Ends to DIN 2533 PN 16 RF SS410/SS310 disc, and SS410 stem, with soft sealing components (rubber parts such as seat insert/packing) selected as per service suitability and operating conditions; the valve shall be designed to ensure tight shut-off, smooth operation, and long service life, and shall be complete with handwheel/actuation mechanism, bolting, gaskets, and all standard accessories; the valve shall conform to relevant international standards (such as ASME/API/BS as applicable), suitable for the specified pressure and temperature ratings, and shall be supplied with necessary test certificates, material test certificates (MTC), and inspection reports for approval.Approved Make - KSB/L&T/BDK/ZOLOTO |
| 5 | Supply, installation, testing, and commissioning of a globe valve suitable for throttling and isolation service, with a nominal size of 100 mm, designed for reliable operation under specified service conditions; the valve shall be of robust construction with (cast iron) body, Flnged Ends to DIN 2533 PN 16 RF SS410/SS310 disc, and SS410 stem, with soft sealing components (rubber parts such as seat insert/packing) selected as per service suitability and operating conditions; the valve shall be designed to ensure tight shut-off, smooth operation, and long service life, and shall be complete with handwheel/actuation mechanism, bolting, gaskets, and all standard accessories; the valve shall conform to relevant international standards (such as ASME/API/BS as applicable), suitable for the specified pressure and temperature ratings, and shall be supplied with necessary test certificates, material test certificates (MTC), and inspection reports for approval.Approved Make - KSB/L&T/BDK/KIRLOSKAR |
| 6 | Supply, installation, testing, and commissioning of a 3-way control valve of nominal size 100 mm, suitable for mixing/diverting service in fluid systems, designed for smooth and precise flow control under specified operating conditions; the valve shall be of robust construction with body material in cast iron/WCB (as per application requirement), with stainless steel (SS304/SS316/SS410 CF8M) internal trim, including plug/disc and stem, and suitable soft sealing elements (PTFE/rubber) based on service conditions; the valve shall be provided with a compatible actuator (manual/electric/pneumatic as specified) ensuring reliable modulation and tight shut-off, and shall be complete with all standard accessories such as positioner (if actuated), flanges, fasteners, and gaskets; the valve shall be designed in accordance with relevant industry standards (ASME/API/BS) and suitable for the required pressure and temperature conditions, and shall be supplied with performance data, test certificates, and material test certificates for approval.Approved Make - BDK/ Advance/KSB/KIRLOSKAR |
| 7 | Supply, Laying, jointing and testing of under electric cable of size 3.5 core 95 sqmm XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor laid in trenches /duct /pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed. |
| 8 | -Ditto- all as per srl item No. 7.00 here-in-before but 3.5 core 35 sqmm. Please Enable Macros to View BoQ information |
| 9 | -Ditto- all as per srl item No. 7.00 here-in-before but 3.5 core 35 sqmm. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender