Tender For Construction Work Of Cremation Ground On Sasni Vijaygarh Road In Nagar Panchayat, Sasni.
Tender Value
28.79 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
3 days left
EMD
2.87 Lakhs
Bank guarantee accepted
Document Fee
3397
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hathras → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Cremation Ground On Sasni Vijaygarh Road In Nagar Panchayat, Sasni.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (Loam, Clay or sand) including lift up to 1.50m and lead up to 30 m and i/c filling, watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation trenches or into the plinth and remval and disposal of surplus earth as directed by Engineer-in-charge upto distance of 30 metre from the foundation trenches as per as per s.i.no.251 ch-4 |
| 2 | Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Coarse sand : 8 graded stone aggregate 40 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work.In Foundation as pwd si no. 275a |
| 3 | Brick work with common burnt clay FPS non modular brick of class designation-100 in foundation and plinth in 1:4 cement, c/sand Sor 6.1.1 |
| 4 | Excavating, supplying and filling of local earth by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. S.I.No. 8 DSR No. 2.25(a) Page No. 26 |
| 5 | Providing and laying in position specified grade of reinforcement cement concrete including the cost of centering shuttering finishing and excluding reinforcement including supply pf all materials ,labours and T&Petc required for proper completion of the work 1:1.5:3 (1 Cement : 1.5 Coarse sand: 3 Graded stone aggregate 20 mm nominal size) .(SOR -5.1.2a) |
| 6 | Brick work with common burnt clay FPS non modular brick of class designation-100 in superstructure above plinth level in 1:4 cement, c/sand Sor 6.4.1 |
| 7 | RCC work in beam , lintels, suspended floors, roofs, having balconies, shelves, chajjas, bands, staircases, above plinth level upto floor five level, i/c the cost of centering, shuttering, finishing and excluding reinforcement -1:1.5:3 cement, coarse sand and stone aggregate 20 mm nominal size i/c all as per dsr no.5.3 sr 8 ch- 05 |
| 8 | Steel reinforcement for RCC work i/c straightening, cutting, bending all complete as DSR no.-5.22.6 CH-10 |
| 9 | 12 mm cement plaster on brick work with cement mortar 1:4 (1cement:4 coarse ) upto 10 m height (SOR 13.4.1) |
| 10 | 6mm plaster on ceiling including chipping of CC/RCC surface before plastering in cement mortar of mix 1:3 (1cement : 3 Fine sand) (Not Less than in 1.25 FM) (SOR 13.6.1) |
| 11 | Finishing walls (Two coats) with water proofing cement paint of approved make such as Super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on undecorated wall surface over and including onecoat white cement primer to give and even shade after thoroughly brushing the surface, including cost of all material, Labour, T&P etc. complete required for proper completion of the work. as PWD si. no. 660 |
| 12 | Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. All work upto plinth level i/c all as per s.i. no. 279 |
| 13 | Steel wok in built up tubular (round,square or rectangular hollow tubes etc.) truses etc. including cutting. Hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Hot finised welded type tubes. as DSR no. 10.16.1 |
| 14 | Painting on Steel/G.S. sheet with synthetic enamel paint .as DSR no. 13.53.1 |
| 15 | Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. DSR no.11.14.4 |
| 16 | S/F 6mm thick china white glazed tile on wall laid with 1:3 cement c/sand i/c all complete as per PWD s.i. no.628ch-14 |
| 17 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per s.i.no. 1 ch-24 |
| 18 | supply and fixing hexagonal /round GP fan box with ms bar as schedule item no. 1149 |
| 19 | P/f of Wiring point with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit with 14 swg copper earth continuity wire GP box, piano type switch and ceiling rose holder on and earthing point |
| 20 | Wiring for light/power plug with FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit with 4sq. earth continuity wire required a. 2×4sq.mm as code no.1.12 |
| 21 | Wiring for light/power plug with FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit with 4sq. earth continuity wire required b. 2×6sq.mm as code no.1.14.4 |
| 22 | Supply and fixing of LED tube light batten fitting 1×22 watt as schedule item no. 1413A |
| 23 | S/f of ceiling fan 1200mm of approved quality as code no. 19.1 |
| 24 | Supply and fixing of 5 to 32 Amp MCB (10kA) CAT A as code no. 2.10.1 |
| 25 | 16 amp switch as code no. 1.23.3 |
| 26 | 6 pin 16 amp socket as code no. 1.23.5 |
| 27 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 1.00 mm thick with zinc coating not less than 275 gm/m² as DSR no. 12.1.1 |
| 28 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete i/c all as DSR no. 11.3.1 b 40mm |
| 29 | S/f of precast cc bench as market rate |
| 30 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 31 | CEMENT CONCRETE PAVEMENT (C.C ROAD) construction of un-reinforced plain cement concrete pavement thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade) coarse and fine aggregates conforming to IS 383 maximun size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side from work (steel channel laying and fixing of 125 micron thick plastic sheet, wedges steel plates including levelling the form work as per drawing) spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continuous opration including provision of contraction and expansion construction joints applying debonding strips primer, sealant admixtures as approved curing concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. |
| 32 | Installation of Handpump i/c all |
| 33 | S/F of solar light of 20watt with pole and sensor |
| 34 | P/F signboard of black granite plate in Brick masonary in Cement mortar i/c all complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender