Tender for Tender for 3Construction Of A Smart Classroom, Furniture, And Beautification Work At The Primary/Composite School In Village Mewli, Under Achhnera Development Block.
Tender Value
12 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
5 days left
EMD
24000
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 3Construction Of A Smart Classroom, Furniture, And Beautification Work At The Primary/Composite School In Village Mewli, Under Achhnera Development Block.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually including disposal of material within 50 metres lead SOR Ch. 17 S.No. 1 |
| 2 | Cement concrete 1:5:10(1 cement :5 C/ sand :10 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.as per DSR as per Ch-5 S.No. 1 |
| 3 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: DSR 2023 SN 2.35.3.1 |
| 4 | 12mm Cement plaster with Cement moratr in proportion of 1:4 cement & Coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm in girth finished even and smooth as per DSR 13.4 PWD s.no. 13.4.1 |
| 5 | 4 mm thk glass panes Providing and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete asper the architectural drawings and the directions of engineer-in-charge With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm DSR 2023 SN 21.3.1 |
| 6 | Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer DSR 2023 SN 13.41.1 |
| 7 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) DSR 2023 SN 13.46.1 |
| 8 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. DSR 2023 SN 13.80 |
| 9 | Painting on wood & STEEL Painting with synthetic enamel paint of approved brand and manufactureof required colour to give an even shade : Two or more coats on new work over an under coat of suitableshade with ordinary paint of approved brand and manufacture DSR 2023 SN 13.62.1 |
| 10 | Providing and fixing PVC false ceiling at all heights with integra densified calcium silicate reinforced with fibre and natural filler |false ceiling tiles of Size 595x595mm of approved texture.design and atterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per B:476 (part-4). fire performance as per BS:476 (part 6 &7). humidity resistance of 100%, themal conductivity <0.043 Wim K as per ASTM K 518:1991 in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 24x38 mm of length 3000 mm, cross- T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended |from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 5x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall parition with the |help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. With 15 mm thlck tegular edged light weight calcium silicate false ceiling tiles. DSR SI NO 26.22.1 P.No. 39 |
| 11 | Providing and fixng factory made Kitchen cabinet shutter/ partition 20mm nominal thickness of approved shade. Quality and make and from rigid foam sheets single extruded having denstiy 600 kg/cum and lamination. The exposed edges shall be seated with in PVC edge beading of same shade and colour the Shutter shall be fire retardent having necessary screw approved hinges with necessary stainless steel screws, all complete as per direction SOR ch. 9 S.no. 16 |
| 12 | Supply and fixing AC with fitting including all charges etc. As per DSR rate (0.755x0.97x57396) |
| 13 | Supply of Intractive pannel having size 75\\" Including installation charge 02 pen, Remote 08 G.B. Ram 128 GB storage android virsion, 3 year on site warranty and its UPS including all charges etc. As per M.R. |
| 14 | Supply of Computer set (Intel Core I7) fitting including all charges etc. As per M.R. |
| 15 | Supply of fixing of Mic sytem for smart class fitting including all charges etc. As per M.R. |
| 16 | Arm shoulder wheel Dimension 600x300x1500mm fitting including all charges etc. As per M.R. |
| 17 | Triple Twister Dimension 1200x750x360mm fitting including all charges etc. As per M.R. |
| 18 | Sea Saw Machine fitting including all charges etc. As per M.R. |
| 19 | High Back Chair chorme matel frame and arm Leatherette on arm, Net leatherette tapesty, gas lift chorme base knee tilt including all charges etc. As per M.R. |
| 20 | Supply of Green Matting for floor in smart class including all charges etc. As per M.R. |
| 21 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside,GP Box, modular type switch & ceiling rose/angle/batten holder on 3mm thick phenolic laminated backalite sheet etc complete in all respect as directed including matching colour wash. SI No.(138C + 187A) |
| 22 | Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside,GP Box , modular type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash. SI No. (140C + 187A) |
| 23 | Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. and modular type switch and socket etc., complete in all respect including matching colour wash. SI No. (141C + 187C) |
| 24 | Supply and fixing of power plug for. with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work. SI No. 1139A |
| 25 | Supply and fixing of compuer point with 2 no. plug point with flush type modular switch and 5 pin universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work. SI No. (141C + 187C)*2 |
| 26 | Supply and fixing of electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. SI No. 1203 C |
| 27 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. SI No. 1413 A Cat A |
| 28 | Supply and fixing of recess/Surface/Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. SI No. 1401 Cat AA |
| 29 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. SI No. 1403 CAT AA |
| 30 | Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit partly laid in slab alongwith reinforcement before concreting and partly concealed in wall, with 1 nos. 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit etc, complete in all respects including matching colour wash. SI No. 1307 C |
| 31 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one no. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. including matching colour wash etc. complete in all respect. SI No. 221 C |
| 32 | Supply and laying of 16 sqmm 2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SI No. 501 c |
| 33 | S & F surface/Flush mounting 4ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. SI No. 1026 A Cat B |
| 34 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve SI No. 1002 Cat A |
| 35 | S&F of 63 Amp. DP MCB (10 KA) SI No. 1011 Cat A |
| 36 | Supply and fixing hexagonal/RoundG.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm& brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. SI No. 1149 |
| 37 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. SI No. 725 B |
| 38 | Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect. SI No. 1116 |
| 39 | Supply of ceiling fans BEE 5 Star rated-1200mm sweep with fan motor of A.C permanent insulation,capacitor rating confirming BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltge 220/240 volts, 50Hz, 1-ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. SI No. 1501 (i) |
| 40 | Add for Invertor Wiring in wiring Point for light/ Fan/ Plug with 1.5 mm Cu Wire |
| 41 | ADD GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender