Tender For Complete Repairing, Rewinding , Servicing And Overhauling Including Other Allied Works Of Motor Of Pump Unit No. 1 At Kudghat Dps Under S&D Department.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Aug 2026
4 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas South → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Complete Repairing, Rewinding , Servicing And Overhauling Including Other Allied Works Of Motor Of Pump Unit No. 1 At Kudghat Dps Under S&D Department.
BOQ
| Sl. No. | Item Description |
| 1 | Power cables to be disconnected from the motor terminal with necessary tools and tackles and to be kept at site. Decoupling the above motor from coupling end and demounting from its base plate . Motor to be transported from pump house to party's work shop. |
| 2 | Motor to be dismantled and rotor to be taken out from stator. The allied components are to be removed by using tool and tackles as per requirement without damaging other spares and to be placed on the wooden block in a workable position. |
| 3 | Properly cleaning of dust and dirt by compressed air and brush from winding of stator & rotor and subsequent heating and cleaning by CTC detergent of rotor. Other components should be thoroughly cleaned and checked. |
| 4 | Stator winding to be stripped completely. Stator core to be cleaned washed & dressed by proper way using CTC detergent. A light coat varnish to be applied on the stator core after complete dressing and proper baking. |
| 5 | New coil to be formed as per original size and dimension with new super enameled copper conductor after making wooden fixture. |
| 6 | Stator to be re-wound with the new formed coils by using class F insulation materials. After completion the winding, laminated wedges to be inserted in the slot portion. |
| 7 | Entire stator winding to be baked and varnished. Thereafter, final coating of varnish to be applied with moisture protecting , tropical properties. |
| 8 | Rotor to be overhauled and varnished. |
| 9 | Damaged six nos. motor leads are to be replaced with new leads and insulation to be done properly including supplying & fixing of copper socket of existing specification. |
| 10 | DE &NDE journal of rotor shaft to be metalized by usual method & finishing the surface by grinding to fit properly . |
| 11 | DE &NDE bearing housing to be metalized by usual method & finishing the surface by grinding to fit bearing properly. |
| 12 | Supply and fixing of 2 nos. DE and NDE side bearings as per sample of any reputed make. |
| 13 | Rebrazing both ends of rotor joints with end rings. |
| 14 | Trueness of the rotor shaft to be checked and rotor to be dynamically balance. |
| 15 | After completion of the above work the motor to be re-assembled with stator, rotor and other necessary parts after painting the inner parts. |
| 16 | Following test to be carried out of the rewound motor by the party and test result will be submitted in due course. i) Resistance test ii) Inductance test iii) Polarity test iv) IR test v) HV test. |
| 17 | The above motor to be transported from the party's work shop to pump house including unloading at site. |
| 18 | Motor to be re-fixed on its original position and cable connection to be made. No load running test to be carried out of the motor. Final running test to be done of full load after re-fixing the coupling bolts and properly alignment with the pump. |
| 19 | Painting the motor body with two coat primer & two coat of final paint (approved make). |
| 20 | Finishing the end of the cables by crimping method including supply and fixing of dowell's make solder less sockets , tapes and other jointing materials with necessary tools and tackles. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender