Tender For Detailed Estimate For Upgradation And Renovation Of Quarter No.5 Galadni Narwal Urban Forestry Division
Tender Value
5.33 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
10 days left
EMD
15990
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Detailed Estimate For Upgradation And Renovation Of Quarter No.5 Galadni Narwal Urban Forestry Division
BOQ
| Sl. No. | Item Description |
| 1 | Regrading terracing of mud phaska covered with tiles or bricks, in cementby dismantling tiles or bricks, removing mud plaster, preparing the surfaceof mud phaska to proper slope, relaying mud plaster gobri leaping andtiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand),including replacing unserviceable tiles or bricks with new ones anddisposal of unserviceable material to the dumping ground (the cost of thenew tiles or brick excluded) within 50 meters lead |
| 2 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarsesand: 4 stone aggregate 10 mm and down gauge), including finishing withcement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase. |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 meters lead :Of area beyond 3 sqm |
| 4 | Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm |
| 6 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size |
| 7 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 8 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete |
| 9 | Chequerred precast cement concrete tiles 22mm thick in footpath andcourtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing, cleaning and curing complete,on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Ordinary cement without any pigment |
| 10 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 1mm putty |
| 11 | Removing dry or oil bound distemper, water proofing cement paint andthe like by scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. |
| 12 | Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade on New work (two or more coats) overand including priming coat with water thinnable cement primer QTY VIDE C |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work Qty vide item no:-32 |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position. With hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or with dash fasteners shall be paid for separately) |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors , windows, and clerestory including ISI marked black enamelled M.S. Butt hinges with necessary screws excluding penelling which will be paid for separately, all complete as per direction of engineer-in -charge. |
| 16 | Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S wire gauze of average width for aperture 1.4 mm in both direction with wire of dia. 0.63mm for doors, windows with necessary secrewsISI marked M.S pressed bright finished butt hinges with necessary screws of required size. second class deodar wood |
| 17 | providing& fixing ISI market oxidised M.S tower bolts black finished (Barrel type) with necessary screws etc. complete. 150 x 10 mm |
| 18 | Providing &fixing ISI merked oxidised M. S handles conforming to IS : 4992 with necessary screws etc. complete.125 mm |
| 19 | Providing &fixing ISI merked oxidised M. S handles conforming to IS : 4992 with necessary screws etc. complete.100 mm |
| 20 | Providing and fixing brass bib cock of approved quali1ty.-15 mm nominal bore |
| 21 | Providing and installation of Jet of approved brand |
| 22 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 23 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore |
| 24 | Providing and fixing PVC waste pipe including PVC waste fittings complete 32mm dia. |
| 25 | Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap. |
| 26 | Providing and fixing white vitreous china pedestal type water closet (European type W.C .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid. |
| 27 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 29 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. with MCB and all fitting |
| 30 | Provision of Heating point Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender