Tender For Repair/ Renovation Of Bathroom Block At Police Station Kralgund Handwara Under Account Head Minor Civil And Electrical Works In Demand-51 (Police)
Tender Value
9.48 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
6 days left
EMD
18960
Bank guarantee accepted
Document Fee
700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Renovation Of Bathroom Block At Police Station Kralgund Handwara Under Account Head Minor Civil And Electrical Works In Demand-51 (Police)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead For thickness of tiles 10 mm to 25 mm |
| 2 | Dismantling of flushing cistern of all types(C.I/PVC/ Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Dismantling/ removing of old damaged G.I/ C.I/ PVC pipes including taking out the pipes manually including stacking of pipes within 50 mtrs lead (upto 150mm dia) |
| 5 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge All kinds of soil |
| 6 | Providing and laying of stone soling hand packed dry including all carriage and cost of material involved complete. |
| 7 | Construction of brick masonry platform for indian W. C including all carriages of material involved complete as directed by EIC. |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood |
| 10 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 12 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown |
| 13 | Providing and fixing of aluminium hardware items including screws etc complte Job. |
| 14 | 200mm long Aldrop |
| 15 | 150mm Handle |
| 16 | Tower bolt 150mm |
| 17 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete. |
| 18 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick |
| 19 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 20 | Finishing walls with Acrylic smooth exterior paint of required shade Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 22 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 23 | Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 20mm OD(SDR-7.4) |
| 24 | Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 32mm OD(SDR-7.4) |
| 25 | Providing and fixing PPR Unions PPR Union 20mm |
| 26 | Providing and fixing PPR Unions PPR Union 32mm |
| 27 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion |
| 28 | 100mm Pipe |
| 29 | Single tee with door 110x110x110 mm |
| 30 | Bend 87.5° 110 mm bend |
| 31 | Coupler 110 mm |
| 32 | 100mm dia F-trap |
| 33 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 34 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 35 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 36 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia. |
| 37 | Providing and fixing C P Cup of approved quality and make as directed by EIC. |
| 38 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length |
| 39 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 liter capacity -White |
| 40 | Providing and fixing of C P Health faucet of approved quality (Hindware, Jaguar, Kerovit or equivalent make as approved by EIC). |
| 41 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 42 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid |
| 43 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 44 | Providing and fixing of brick masonary manholes 300mmx300mm incluidng PVC cover with frame, plaster and concrete base all complete. |
| 45 | Supplying, fixing , Installation and commissioing of 1.00 HP water motor of approved brand like Crompton Greaves, KSB or equivalent make including all necessary fittings and connections complete Job as directed by EIC |
| 46 | Providing & Fixing of Exhaust fan (200mm dia) of approved make like (Havells, Orient, Crompton) including all necessary fittings all complete Job. |
| 47 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 48 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 49 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete |
| 50 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 51 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 52 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 53 | Carriage of material by mechanical transport including all loading / unloading complete |
| 54 | Sands Aveg. lead of 20 Km |
| 55 | Crushed Aveg. lead of 20 Km |
| 56 | Bricks Aveg. lead of 80 Km |
| 57 | Providing and fixing of following types of switches, sockets, with Gang box and allied accessories including dismantling of existing switches and sockets with terminations as required. |
| 58 | 6A switch only piano type |
| 59 | 6A socket only piano type |
| 60 | 16 A piano switch socket combined with PVC box |
| 61 | 6 A Modular switch |
| 62 | 6 A Modular socket |
| 63 | 16 A Modular switch socket combined with gang box |
| 64 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point including 1.5 sq.mm FR PVC insulated copper conductor single core cable as required for restoration of the supply in existing surface / recessed steel/medium class PVC conduit |
| 65 | Group A |
| 66 | Group B |
| 67 | Group C |
| 68 | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ medium class PVC conduit as required (as per Schedule) Finolex/Polycab/Havells/ Anchor/KEI make |
| 69 | 2 x 2.5 Sqmm |
| 70 | 2 x 4 sqmm |
| 71 | Supply and fixing of following sizes moduler base Plate and cover plate on existing modular metal boxes etc as required for moduler swtiches |
| 72 | 12 Modular |
| 73 | 8 Modular |
| 74 | 6 Modular |
| 75 | 4 Modular |
| 76 | 3 Modular |
| 77 | Providing and fixing of following type of MCB's/switch gear of 10 KA or more capacity series including testing and necessary terminations. |
| 78 | 63 A DP |
| 79 | 32 A DP |
| 80 | 6A-32A MCB's |
| 81 | Providing and fixing of following MCB distribution boxes double door with inbuilt tinned copper heavy duty bus bars for earth, earth, and jumpers of proper current ratings. |
| 82 | 16 way SPN |
| 83 | 08 way SPN |
| 84 | Providing and fixing of LED lights of following type including necessary terminations as required. |
| 85 | T-5 LED 4' long 20 watt |
| 86 | T-5 LED 2' long 9 watt |
| 87 | 12 watt concealed/ surface LED panel lights |
| 88 | 12 Watt LED Lamps |
| 89 | Providing and fixing of Angle/straight holders including terminations |
| 90 | Providing and fixing of Phenolic sheets of desired shapes and sizes incluting cutting, finishing, drilling etc. |
| 91 | Providing and fixing of exhaust 150mm Shutter type including terminations as required |
| 92 | Providing and fixing of following sizes of PVC battens along the wall or ceiling including dismantling of existing damaged battens. |
| 93 | 1\\" wide surface batten 6 feet long |
| 94 | 1.5\\" wide surface batten 6 feet long Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender