Tender For Rate Contract For Renovation & Modernization Of Distribution Substation Of Various Sub-Divisions Falling Under The Jurisdiction Of Electric Division 3Rd Under Capex Budget 2026-27
Tender Value
10 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
15 days left
EMD
20000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rate Contract For Renovation & Modernization Of Distribution Substation Of Various Sub-Divisions Falling Under The Jurisdiction Of Electric Division 3Rd Under Capex Budget 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Renovation and Modernization of various substations falling under jurisdiction of ED-3rd |
| 2 | Supply, Installation, testing & Commissioning of 11 KV Gap-less Surge Arrestor 9 kV, 10 kA, LA with polymer housing, Stn. Type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V) |
| 3 | Supply, Installation, testing & Commissioning of 11 KV Horn Gap Fuse Set 3 Phase 200A as per Relevant IS. |
| 4 | 11 KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V) |
| 5 | Supply, Installation, testing & Commissioning of G.I Pipe of 150 mm dia 3 mtr long for Pole Butts (6\\") (including digging of pits) |
| 6 | Supply, Installation, testing & Commissioning of GI Channel/Angle/Flat of sizes including clamps/collars( for L.A Set/G.O Set/Horn Gap & Transformer Pad/G.I Channel Bedding etc) |
| 7 | Supply, Installation, Testing and commissioning of S.T. poles 8.0 Meter long swaged Type conforming to ST 410 SP-15, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 15). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded. |
| 8 | Supply, Installation, Testing and commissioning of S.T. poles 9.0 Meter long swayed Type conforming to ST 410 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded. |
| 9 | Supply, Laying, stringing, testing and commissioning of XLPE LT Cable Single Core, Un-Armoured, XLPE Insulated Stranded Conductor FRLS type including lugs/thimbles/ clamps/collars |
| 10 | 185 mm² |
| 11 | 240 mm² |
| 12 | 300 mm² |
| 13 | 400 mm² |
| 14 | 630 mm² |
| 15 | Supply, Laying, stringing, testing and commissioning of 30 mm² ACSR Conductor |
| 16 | Supply, Laying, stringing, testing and commissioning of 50 mm² ACSR Conductor |
| 17 | Supply, Laying, stringing, testing and commissioning of 11 KV Polymeric composite Disc Insulator 12 KV,min failing load 45kN, Lighting Impulse 75 KV Positive and 80 KV Negative, creepage distance 320 mm |
| 18 | Supply, Laying, stringing, testing and commissioning of 11kV Polymeric composite Pin Insulator with pins 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 19 | Supply, Laying, stringing, testing and commissioning of LT Fuse Set (Customized) for Distribution Transformers as per KPDCL Drawing no. CE/P&P/DRG/2023/LTFS/001 |
| 20 | Design, fabrication, Supply, installation, testing and commissioning of LT Distribution Box for 63 kVA DTR with 100 Amp MCCB 3P 16 kA for incomer & 100 Amp MCCB 3P 16 kA 1 No. and 63 Amp MCCB 3P 16 kA 1 No.s for Outgoing Circuits |
| 21 | Design, fabrication, Supply, installation, testing and commissioning of LT Distribution Box for 100 kVA DTR with 160 Amp MCCB 3P 16 kA for incomer & 100 Amp MCCB 3P 16 kA 2 No.s for Outgoing Circuits. |
| 22 | Design, fabrication, Supply, installation, testing and commissioning of LT Distribution Box for 200 kVA DTR with 315 Amp MCCB 3P 25 kA for incomer & 160 Amp MCCB 3P 16 kA 3 No.s for Outgoing Circuits. |
| 23 | Design, fabrication, Supply, installation, testing and commissioning of LT Distribution Box for 250 kVA DTR with 400 Amp MCCB 3P 36 kA for incomer & 200 Amp MCCB 3P 16 kA 1 No. and 160 Amp MCCB 3P 16 kA 2 No.s for Outgoing Circuits |
| 24 | Design, fabrication, Supply, installation, testing and commissioning of LT Distribution Box for 400 kVA DTR with 630 Amp MCCB 3P (36 KA) adjustable 1 No. for incomer & 200 Amp 3 P (16 KA) 4 No.s fixed for Outgoing Circuits |
| 25 | Design, fabrication, Supply, installation, testing and commissioning of LT Distribution Box for 630 kVA DTR with 1000 Amp MCCB 3P (36 KA) adjustable 1 No. for incomer & 250 Amp MCCB 3 P (25 KA) 2 No.s fixed & 200 Amp MCCB 3 P (25 KA) 3 No.s for Out going. |
| 26 | Supply and fixing of Galvanized Nuts and Bolts |
| 27 | Supply and Painting of poles with red Oxide |
| 28 | Supply and Painting of poles with Aluminium Paint |
| 29 | Providing and laying of Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body including baby insulators, G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials and earth Chamber made of brick masonry with RCC slab cover. |
| 30 | Providing and laying of Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25x3 mm |
| 31 | Providing and fixing of Danger Plates with Clamps |
| 32 | Providing and fixing of PG Clamps/ Wedge connectors |
| 33 | Supply and Fixing of GI Barbed Wire for Anti Climbing |
| 34 | Providing and fixing of Wire mesh fencing around the substation of size upto 8'x4' made out of wire mesh 1\\"x1\\"square including fixing in cement 1:2:4 |
| 35 | Providing and laying of Cement bottoming of poles (1:2:4 Mix as per REC Standards 0.48M3 per Pole) |
| 36 | Providing and laying of Cement bottoming of poles (1:2:4 Mix as per REC Standards 0.40M3 per Pole) |
| 37 | Dismantling of 100 kVA DT from old structure & Re-reerection at new Structure. The job includes Transportation, carriage, loading and unloading. |
| 38 | Dismantling of 200 kVA DT from old structure & Re-reerection at new Structure. The job includes Transportation, carriage, loading and unloading. |
| 39 | Dismantling of 250 kVA DT from old structure & Re-reerection at new Structure. The job includes Transportation, carriage, loading and unloading. |
| 40 | Dismantling of 400 kVA DT from old structure & Re-reerection at new Structure. The job includes Transportation, carriage, loading and unloading. |
| 41 | Dismantling of 630 kVA DT from old structure & Re-reerection at new Structure. The job includes Transportation, carriage, loading and unloading. |
| 42 | Dismantling of old ST Poles and shifting of same to divisional stores. The job includes Transportation, carriage, loading and unloading. |
| 43 | Dismantling of old PCC Poles and safe disposal of same at the designated site |
| 44 | Dismantling of old Wooden Poles and shifting of same to divisional stores. The job includes Transportation, carriage, loading and unloading. |
| 45 | Dismantling of old allied material of Substation and shifting of same to divisional stores. The job includes Transportation, carriage, loading and unloading. |
| 46 | Dismantling and removal of the old substation concrete foundation/bed, transportation of reusable stones to the Divisional Store, and safe disposal of all unserviceable materials, debris, and residual waste at a designated site (Complete Job). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender