Tender For Repair/ Renovation Of Labatory Block At Traffice City Srinagar Under Account Head Minor Civil And Electrical Works In Demand 51 Police.
Tender Value
12.72 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
4 days left
EMD
25440
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Renovation Of Labatory Block At Traffice City Srinagar Under Account Head Minor Civil And Electrical Works In Demand 51 Police.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10 mm to 25 mm (5mm thick) |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and fixing of CP fitting of Haquar/Cera Make 15mm nominal bore. |
| 5 | Angle valve |
| 6 | Bib Cock |
| 7 | Basin Mixer |
| 8 | Wall Mixer |
| 9 | CP grating 100mm size |
| 10 | Towel Rod |
| 11 | Soap Case |
| 12 | PVC Connection 1'-6\\" long |
| 13 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 14 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 15 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 16 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 17 | Provding and fixing of PVC Soil waste and vent pipes of approved manufacture and brand (type-B) incluidng jointing with adhesive complete. |
| 18 | 100mm dia |
| 19 | 75mm dia |
| 20 | Providing and fixing of fitting to PVC Soil waste pipes of approved amnufactuire and brand (type-B) |
| 21 | 100mm dia plain bend |
| 22 | 100mm dia floor trap |
| 23 | 75mm dia plain bend |
| 24 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 25 | Providing and fixing of Hot water heater Geyser 50 ltrs of approved make like venus, Jupiton, Racold or equivalent make including all necessary fittings complete Job. |
| 26 | 15mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement: 6 fine sand) |
| 27 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 28 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown |
| 29 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 30 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick |
| 31 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 32 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) KD wood |
| 33 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge First class kail wood |
| 34 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws First class kail wood |
| 35 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) Second kail wood |
| 36 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 37 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 38 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge All kinds of soil |
| 39 | Providing and laying of stone soling / boulders hand packed dry including ramming, dressing, watering all complete and cost of material involved complete. |
| 40 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 41 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing & reinforcement All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 42 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 43 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms |
| 44 | Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 45 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 46 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate. |
| 47 | Providing and fixing of Cement concrete Rings of 36\\" dia and 10' ht for soakage pit including earth work in excavation.dewatering if any, laying rings in vertical position with 1\\" slacing and RCC top cover of 36\\" dia including all carriages compelte. |
| 48 | Construction of brick masonary manhole (Internal dimension 45cmx45cmx45cm) in cement mortar 1:4 ( 1 cement : 4 coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a loating coat of neat cement , foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand: 6 graded stoine aggregate 40mm niminal size) and making necessary channel in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm niminal size) finished with a loating coat of neat cement all complete incluidng cost of CI manhole cover. |
| 49 | Providing and fixing of following types of switches, sockets, with Gang box and allied accessories including dismantling of existing switches and sockets with terminations as required. |
| 50 | 6A switch only piano type |
| 51 | 6A socket only piano type |
| 52 | 16 A piano switch socket combined with PVC box |
| 53 | 6 A Modular switch |
| 54 | 6 A Modular socket |
| 55 | 16 A Modular switch socket combined with gang box |
| 56 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point including 1.5 sq.mm FR PVC insulated copper conductor single core cable as required for restoration of the supply in existing surface / recessed steel/medium class PVC conduit |
| 57 | Group A |
| 58 | Group B |
| 59 | Group C |
| 60 | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ medium class PVC conduit as required (as per Schedule) Finolex/Polycab/Havells /Anchor/KEI make |
| 61 | 2 x 2.5 Sqmm |
| 62 | 2 x 4 sqmm |
| 63 | 2 x 6 sqmm |
| 64 | 2 x 10 sqmm |
| 65 | Supply and fixing of following sizes moduler base Plate and cover plate on existing modular metal boxes etc as required for moduler swtiches |
| 66 | 12 Modular |
| 67 | 8 Modular |
| 68 | 6 Modular |
| 69 | 4 Modular |
| 70 | 3 Modular |
| 71 | Providing and fixing of following type of MCB's/switch gear of 10 KA or more capacity series including testing and necessary terminations. |
| 72 | 63 A DP |
| 73 | 32 A DP |
| 74 | 6A-32A MCB's |
| 75 | Providing and fixing of following MCB distribution boxes double door with inbuilt tinned copper heavy duty bus bars for earth, earth, and jumpers of proper current ratings. |
| 76 | 16 way SPN |
| 77 | 08 way SPN |
| 78 | Providing and fixing of LED lights of following type including necessary terminations as required. |
| 79 | T-5 LED 4' long 20 watt |
| 80 | T-5 LED 2' long 9 watt |
| 81 | 12 watt concealed/ surface LED panel lights |
| 82 | 12 Watt LED Lamps |
| 83 | Providing and fixing of Angle/straight holders including terminations |
| 84 | Providing and fixing of Phenolic sheets of desired shapes and sizes incluting cutting, finishing, drilling etc. |
| 85 | Providing and fixing of exhaust 150mm Shutter type including terminations as required |
| 86 | Providing and fixing of following sizes of PVC battens along the wall or ceiling including dismantling of existing damaged battens. |
| 87 | 1\\" wide surface batten 6 feet long |
| 88 | 1.5\\" wide surface batten 6 feet long |
| 89 | Supply and laying of following unarmoured, PVC insulated, aluminium cables. |
| 90 | 25 sqmm 2- core |
| 91 | Supply,assembling,installation of (as per approved sample) 30 watt LED flood Light powder coated, pressure die cast aluminium housing with heat sink IP 66 protected, with i/p AC90-300V. |
| 92 | Carriage of material by mechanical transport including all loading / unloading complete |
| 93 | Sand Aveg. lead of 25 Km |
| 94 | Stone Agg. Aveg. lead of 25 Km |
| 95 | Bricks Aveg. lead of 20 Km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender