Tender For Construction Of Patwar Khana At Rajwar
Tender Value
7.95 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
8 days left
EMD
23850
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Patwar Khana At Rajwar
BOQ
| Sl. No. | Item Description |
| 1 | Engagement of manual labour for Clearence of site including disposal of same, all complete job |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 1 M from edge of cutting. |
| 3 | Supplying and laying of stone soling hand packed tightly including ramming, watering. |
| 4 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 5 | Providing and laying in position specified grade of reinforced cement concreteincluding curing but excluding the cost of centering, shuttering, finishing andreinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone agg 20 mm N. size) Raft |
| 6 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:3:6 coarse sand 40mm nominal size crushed stone agg.) using 20% Plum |
| 7 | Centering and shuttering including strutting propping etc. and removal of form work; Foundations, footings, bases of columns, mass concreting. |
| 8 | Centering and shuttering including strutting propping etc. and removal of form work; Suspended floors, roofs, landings, balconies and access platforms. |
| 9 | Providing and Laying Damp Proof course 50 mm thick with cement mortar in 1:2:4 mix, 20mm nominal size of aggregate and curing complete. |
| 10 | Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate). 50 mm thick 12.50mm nominal size stone aggregate (crushed) including glass strips at a squared interval of 5'x5' |
| 11 | Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 Cement : 6 Coarse sand) (including Extra Brick Work) |
| 12 | Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 Cement : 6 Coarse sand) all works upto Plinth Level |
| 13 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size). |
| 14 | Providing wood work in frames of Doors,windows, clerestory window and other frames,wrought frames and fixed in position. |
| 15 | Providing and fixing 30 mm thick glazed shutter for windows and clearstory windows using 10kg/sqm (4mm thick)glass panes including black enamelled ISI marked M.S hinges with necessary screws. KD Wood |
| 16 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood(KD) and well matched teak face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick |
| 17 | Providing and fixing 30 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge, imported (KD) wood |
| 18 | Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete : A) 150 mm tower Bolts |
| 19 | 100mm tower Bolt(W/V) |
| 20 | Link/Godrej Al Drop Locktype |
| 21 | Simple Aldrop |
| 22 | 125 mm Handle |
| 23 | 100mm Handle |
| 24 | Bright finished brass hard drawn hooks and eyes 150 mm |
| 25 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 26 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete |
| 27 | Filling by Available excavated earth (excluding rock) in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth ,consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m |
| 28 | Supplying and filling in plinth with fine sand /Nallah Muck under floors including watering rammiing ,consolidating and dressing complete. |
| 29 | 12mm Cement Plaster of mix 1:4(1 cement:4 fine sand) |
| 30 | 6 mm thick plaster in Cement Mortar 1:3 mix.(Ceiling) |
| 31 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded, Truss work with Soffit etc |
| 32 | Providing C.G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape. 0.50mm thick |
| 33 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 34 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 36 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 37 | Distempering with oil bound washable distemper of approved brand and Manufacture to give an even shade on new work (two or more coats) over and including priming coat with water thinnable cement primer. |
| 38 | Finishing walls with water proofing cement paint of required shade on New Work (two or More Coats [email protected]/10sqm) |
| 39 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shade except begundy, bottle green, black of any size as approved by Eningeer in- Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 40 | Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc.,complete. |
| 41 | Providing and fixing PPR pipes complete with fittings and clamps including cutting chases and making good the walls etc, 16 mm dia |
| 42 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes i/c ball cock |
| 43 | Providing and fixing ball valve (brass of approved quality complete: 20mm nominal bore |
| 44 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 45 | P/F Door Tee 100 mm dia PVC of Approved make type B |
| 46 | P/F Plain Bend 100 mm dia PVC of Approved make type B |
| 47 | P/F 100 mm dia PVC Collar of Approved make type B |
| 48 | P/F 75 mm dia PVC Collar of Approved make type B |
| 49 | P/F Soil Waste Disposal Pipes 100 mm complete job |
| 50 | P/F Soil Waste vent Pipes 75 mm complete job |
| 51 | P/F PVC cowel cover over vent pipe of approved quality |
| 52 | P/F 100x75 mm reducer PVC of approved quality |
| 53 | P/F MS stays and clamps for pvs pipes 75 mm |
| 54 | P/F Brass angle valve of approved quality |
| 55 | Providing and fixing brass bib cock of approved quality.20 mm nominal size |
| 56 | P/F of lighting points which shall incl wiring for lighting points in 1.5 sq mm PVC insulated multi strand copper wire & 2.5 sq mm PVC insulated multistrand copper wire for lighting submains, 6 amp oneway switch, 2mm thick PVC conduit with bends, junction boxes etc 6 Amp S pole MCB, 10 Amp DP MCB, 2 way DB for housing MCB and Hylen sheets recessed in walls with accessories, complete job. |
| 57 | P/F of Heating points which shall incl wiring for Heating points in 2.5 sq mm PVC insulated multi strand copper wire & 4 sq mm PVC insulated multistrand copper wire for heating submains, 16 amp switch socket combined , 2mm thick PVC conduit with bends, junction boxes etc 10 Amp S pole MCB, , 2 way DB for housing MCB and Hylen sheets recessed in walls with accessories, complete job. |
| 58 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted complete |
| 59 | P/F of Fanpoints which shall incl wiring for fan points in 1.5 sq mm PVC insulated multi strand copper wire,1200 mm ceiling fan with ceiling rose& PVC Square block 350 watt electronic fan dimmer, 2mm thick PVC conduit with bends, junction boxes etc 6 Amp S pole MCB, 10 Amp DP MCB, 2 way DB for housing MCB and Hylen sheets recessed in walls with accessories, complete job. |
| 60 | Constructing brick masonry chamber/manhole with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame & hinges (light duty) 455x610 mm internal dimensions i/c padlock arrangement with lock, fixed in 1:1.5:3 mix,, inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design |
| 61 | Dry RR Masonry in Nallah stones in foundation and Plinth |
| 62 | Carriage of different material from nearest source to site of work. Stone agg, sand Avg 20 Km. |
| 63 | Bricks from Avg 85 Km |
| 64 | Stones 15KM |
| 65 | Provision for signboard and photograph Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender