Tender For Replacement Of Old Wiring, Fittings And Fixtures With New Wiring & Led Fittings At Lodhi Road Barat Ghar Under Jor Bagh Wiring Enquiry, Bm-Ii (Elect.) Division, New Delhi.
Tender Value
15.50 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
5 days left
EMD
31006
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Old Wiring, Fittings And Fixtures With New Wiring & Led Fittings At Lodhi Road Barat Ghar Under Jor Bagh Wiring Enquiry, Bm-Ii (Elect.) Division, New Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C. |
| 2 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 3 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 4 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 5 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 6 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 7 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).4 way (4 + 12), Double door |
| 8 | 4 way (4 + 24), Double door |
| 9 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63amps |
| 10 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 11 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps |
| 12 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket oulet and complete with connections, testing and commissioning etc. as required. |
| 13 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 14 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 15 | Brush Less Direct Current (BLDC) Fan withoutRemote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value63 DELHI SCHEDULE OF RATES (E&M)-2025(CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 16 | SITC of exhaust fan double ball bearing heavy duty, 12\\" (300mm sweep)complete with motor, 3/4 blades sets down double ball bearing andmotor should be copper winding performs well at low voltage, RPM 1400, 220/240 V, 50 HZ, Grey colors. warranty 02 years from the date ofsupply, Make:- Usha/ Havells/ Crompton/Bajaj |
| 17 | SITC of 15W dowlighter in existing ceiling including cutting of POP for adjusting dowlighter on various height with complete testing commissioning as required.Make:Syska/Philips/Osram |
| 18 | Supply of 45-50watt LED waterproof outdoor community post top lightsadopts aluminum heat sink and sheet metal frame, 400x400x630.5mm/ 15.75\\"x15.75\\"x24.8 (approx in size),with IP-65 Protection and CCT 5700-6500K, CRI>70, Constant current driver suitable for 100-280V AC working range, LM80 certified, Internal wiring Teflon insulated, Cu. Conductor, Efficacy ≥85 im/w Warranty 2 years. including fixing of GI Pipe of 2\\" dia for installation of LED post top lantern with allied accessories, etc. (As per site requirement)Make:Syska/Philips/Osram |
| 19 | Supply of Decor chronicle 35-40W square shape LED Ceiling Hanging Light, Aluminum, Indoor Commercial Profile including Pendant Lamp, CCT 5700-6500KWarranty 2 yearsMake:Syska/Philips/Osram |
| 20 | Supply of flood light 50 watt color temp 5700-6500K, 50 Hz 230V, as per IS with 2 years replacement warranty.Make:Syska/Philips/Osram |
| 21 | Supply of 36 watt 2X2 LED square surface ceiling light panel color temp 6500K, 50 Hz 230V, IP 20with 3 years replacement warranty.Make:Syska/Philips/Osram |
| 22 | Installation, Testing and Commissioning of pre-wired, fluorescent fitting / compact fluorescent/ LED fitting ofall types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connectionswith 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 23 | Deduct - Less credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender